Help on Oscam for reading local Viasat 4,9E card.

There are 38 replies in this Thread which was already clicked 17,454 times. The last Post () by justiina.

    Can someone please guide me in the right direction to be able to use my original Viasat 4,9E card in my vu+?


    I am Using vu+ uno with image bh179
    Manually installed oscam Oscam6368+CCcam213 for blackhole image


    Set card in upper cardreader sci1


    Config info:


    *oscam.conf*
    global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    maxlogsize = 10 # Logfile reaches to 10 KBytes
    preferlocalcards = 1
    saveinithistory = 1


    # monitor


    [monitor]
    port = 988
    monlevel = 4
    nocrypt = 127.0.0.1


    # web interface


    [webif]
    httpallowed = 127.0.0.1,10.0.0.2-10.0.0.200
    httpport = 8001
    httpuser = root
    httppwd = password


    # protocols


    [dvbapi]
    enabled = 1
    boxtype = dreambox
    user = VuPlus
    au = 1
    pmt_mode =


    [cccam]
    port = 12000
    version = 2.1.3
    build = 3165
    reshare = 1
    reshare_mode =
    ignorereshare =
    minimizecards =
    stealth = 1
    updateinterval =
    keepconnected = 1


    *oscam.server*
    [reader]
    label = upper_viasat
    protocol = internal
    device = /dev/sci1
    enable = 1
    boxid = xxxxxxxx
    Detect = CD
    mhz = 500
    cardmhz = 357
    ident = 093E:000000
    emmcache = 1,3,15
    group = 1
    caid = 093E
    blockemm-unknown = 1
    blockemm-g = 1


    *oscam.user*
    [account]
    user = VuPlus
    group = 1
    caid = 093E
    ident = 093E:000000
    au = VIASAT
    monlevel = 0


    *oscam.dvbapi*
    P: 093E:000000 # prioritise CAID 0100 with provider 123456



    Boxid is created from 11 digit nr on viasat org tuner. removed last digit, converted to HEX, added a 0 and pasted to boxid-line.



    I have spent quite a long time to get this right reading a lot of guidelines on this forum, but still no luck.

    • Official Post
    Quote


    Set card in upper cardreader sci1


    sci1 is the lower slot, set as sci0 for the upper slot, e.g;


    *oscam.server*
    [reader]
    device = /dev/sci0


    You need to convert the boxkey for Viasat, have you done this and added to oscam.server ? e.g


    [reader]
    boxid = 12345678


    Make these changes then show us the oscam log if you are still having problems buddy..

    Oh ok, changed the device nr to 0 and put the card back in, in upper slot.


    Not shure if get the convertion of boxkey right. Here is what i did.
    From under the box i got the 11 digit number. i removed the last digit and converted this number to HEX. This returned a 7-digit number in which i added a 0-digit in front to achieve a 8-digit number.
    boxid = 0DXXXXXX
    Was this correct?


    Still not working thoug, so here is the log:


    Mar 11 14:46:03 vuuno daemon.debug CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:37:55
    Mar 11 14:46:03 vuuno daemon.debug CCcam: ======================================================================
    Mar 11 14:46:03 vuuno daemon.debug CCcam: online using nodeId a831ba055f80f189
    Mar 11 14:46:03 vuuno daemon.debug CCcam: read config: cannot open /var/tuxbox/config/newcamd.conf or not found
    Mar 11 14:46:03 vuuno daemon.debug CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
    Mar 11 14:46:03 vuuno daemon.debug CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
    Mar 11 14:46:03 vuuno daemon.debug CCcam: static cw not found or bad
    Mar 11 14:46:03 vuuno daemon.debug CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
    Mar 11 14:46:03 vuuno daemon.debug CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
    Mar 11 14:46:03 vuuno daemon.debug CCcam: server started on port 12000
    Mar 11 14:46:08 vuuno daemon.debug CCcam: EMM: not interested in 0B00:00000

    Cheers, ill see if i can get the boxkey correct.


    m getting confued with what is reader and what is server, but it makes no different to me if oscam can be both.


    I tried to make a file called oscam.log and put it in the log folder. But when i rebooted the tuner, this file was missing?
    So im not quite shure what logfile i can attach?
    can i c/p the info from the webinterface? Here it is:



    8c4bff8ff51847c47da10bd3.png

    Mate, the DBCreator program got me even more confused.
    To generate the boxid i had to add two serialnrs.
    1 with (9-11) chars
    1 with (17) chars


    Problem is my serialnr is 16 chars and cardnumber is 12 chars (beginning on 0160......)

    • Official Post

    Generate the serial number from underneath the receiver not the card number..


    Quote from togstr

    Cheers, ill see if i can get the boxkey correct.


    m getting confued with what is reader and what is server, but it makes no different to me if oscam can be both.


    I tried to make a file called oscam.log and put it in the log folder. But when i rebooted the tuner, this file was missing?
    So im not quite shure what logfile i can attach?


    Add this to oscam.conf then restart oscam, look in /var/log/oscam.log;

    Code
    [global]
logfile = /var/log/oscam.log

    2013/03/11 16:43:19 0 s creating thread for device /dev/sci0
    2013/03/11 16:43:19 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/03/11 16:43:19 0 s waiting for local card init
    2013/03/11 16:43:19 5CD690 r reader upper_viasat initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
    2013/03/11 16:43:20 5CD690 r upper_viasat card detected
    2013/03/11 16:43:23 5CD690 r ERROR in IO_Serial_Read (errno=0 Success)
    2013/03/11 16:43:23 5CD690 r ATR: 3F 7D 11 25 02 41 B0 03 69 FF 4A 50 F0 80 00 56 54 03
    2013/03/11 16:43:24 5CD690 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
    2013/03/11 16:43:27 5CD690 r [videoguard2-reader] parental lock setting: FF FF FF FF
    2013/03/11 16:43:27 5CD690 r [videoguard2-reader] type: VideoGuard Viasat (093E), caid: 093E
    2013/03/11 16:43:27 5CD690 r [videoguard2-reader] serial: 5F6DBA53, BoxID: xxxxxxxx, baseyear: 2000
    2013/03/11 16:43:27 5CD690 r [videoguard2-reader] ready for requests
    2013/03/11 16:43:27 5CD690 r found cardsystem videoguard2
    2013/03/11 16:43:27 5CD690 r [videoguard2-reader] upper_viasat card detected
    2013/03/11 16:43:27 5CD690 r [videoguard2-reader] type: VideoGuard Viasat (093E)
    2013/03/11 16:43:27 5CD690 r [videoguard2-reader] tier: 0014, expiry date: 2013/05/05-00:00:00
    2013/03/11 16:43:27 5CD690 r [videoguard2-reader] tier: 0015, expiry date: 2013/05/05-00:00:00
    2013/03/11 16:43:27 5CD690 r [videoguard2-reader] tier: 0016, expiry date: 2013/05/05-00:00:00

    i really appreciate your swift replies, and hope you dont mind me keeping asking some silly questions :-)


    Ive just done what you asked med to to, but the logfile isnt updated? Isnt it the var/log/oscam.log file?


    This is the lase line ithe this file:
    013/03/11 16:43:30 5CD690 r [videoguard2-reader] tier: 00ff, expiry date: 2013/05/05-00:00:00
    switch log file

    Here is a refresh from webinterface log. swapped through different channels, and even some C+ who works via newcs.
    Dosent look like something is happening at all, does it?


    -------------------------------------------------------------------------------
    >> OSCam << cardserver log switched at Mon Mar 11 20:04:08 2013
    -------------------------------------------------------------------------------
    2013/03/11 20:04:08 745004D0 r ending thread
    2013/03/11 20:04:08 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #6337 (mips-tuxbox-linux)
    2013/03/11 20:04:08 0 version=1.20-unstable_svn, build #6337, system=mips-tuxbox-linux, nice=-1
    2013/03/11 20:04:08 0 client max. idle=120 sec, debug level=255
    2013/03/11 20:04:08 0 max. logsize=10 Kb, loghistorysize=4096 bytes
    2013/03/11 20:04:08 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
    2013/03/11 20:04:09 0 start reader thread action 11
    2013/03/11 20:04:09 745004D0 r data from add_job action=11 client r upper_viasat
    2013/03/11 20:04:09 745004D0 r ending thread
    2013/03/11 20:04:10 0 start reader thread action 11
    2013/03/11 20:04:10 745004D0 r data from add_job action=11 client r upper_viasat
    2013/03/11 20:04:10 745004D0 r ending thread
    2013/03/11 20:04:11 0 start reader thread action 11

    2013/03/25 15:13:55 512988 r ***UK [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/03/25 15:13:55 520E28 c linuxsat (093E&000000/0000/0582/6C:2DC85142BC9D9D6A311608EA513BC329): not found (220 ms) by ***UK -
    i bet its some thing like this^^
    we are in the same boat you and i, i managed to get working on the non hd channels only tho

    gigablue hd quad

    Could you guys please give me a hint regards to the box id. Have a Pace DS830NV, and the boxid-genrator wont show anything in the box id box.. Not sure which numbers to input in generator..


    Got one sticker saying :Serial No - but only 16 chr. And there is a bar code with only a 11 digit number - the serial do also have letters.. Please help :)

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login