Cant see scrambled channels on Enigma 2 but can on Spark

Hi Rami

I would prefer for you to advise me so I can learn how to do this for myself

[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 2
appendchaninfo = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = amiko
pmt_mode = 0
request_mode = 0
#priority = 0100:000068,1803,0D03:000008,0D05,1702,0500:042700,0500:042200,0500:041700,0500:040810,1810,1830,1880,09CD,0500:32830
#ignore = 09C7,09C4

[webif]
httpport = 81
httpuser = user
httppwd = pass
httpcss = /var/tuxbox/config/blue.css
httprefresh = 15
httpallowed = 192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

#[reader]
#label = newcamd_server
#protocol = newcamd
#key = 0102030405060708091011121314
#device = host and the port
#account = user, passwd
#group = 2
##########################################################
# #
# All lines preceded by "#" are comment lines so #
# use this model for all your readers ( up to 32 ). #
# A C: line is a CCcam reader , a N: line is NewCamd #
# reader , the internal card readers are also shown. #
# A card reader must always to specify the CAID. #
# #
##########################################################
#
# this is an example of how to connect a CCcam server
# this line acts as a cccam 2.0.11 client (recomended)
#
#[reader]
#label = dreambox1
#enable = 1
#protocol = cccam
#device = your host and port
#user = user
#password = passwd
#cccversion = 2.2.1
#cccmaxhops = 3
#group = 1
#inactivitytimeout = 1
#reconnecttimeout = 30

#
#[reader]
#label = internal_hrt
#enable = 1
#protocol = internal
#device = /dev/sci0
#services =
#caid = 0500
#detect = cd
#mhz = 500
#cardmhz = 500
#ident = 0500:020A00
#group = 2
#emmcache = 1,3,2
#ecmcache = 1
#lb_weight = 100
#
#[reader]
#Enable = 1
#Label = orf-camd3
#Protocol = camd35
#Device = 127.0.0.1,30001
#Account = test,pass
#CAID = 0D05
#Group = 1
#
# this is an example how to connect to a NewCamd server
#
# this is an example how to "read" a na*ra card internal(e.g. HD+/HD01)
#
# [reader]
# Label = HD plus
# Protocol = internal
# Device = /dev/sci0
# detect = CD
# EMMCache = 1,1,2
# group = 3
# CAID = 1830
# rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# boxkey = A7642F57BC96D37C
#
# this is an example how to "read" a na*ra card internal(e.g. HD+/HD02)
#########use following entry in oscam.services(required)#######
####[hdplus]
####caid=1843
####srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274
#########
#
# [reader]
# Label = HD plus
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# group = 4
# CAID = 1843
# ident = 1843:003411,000000,008011 #not required#
# rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# boxkey = A7642F57BC96D37C
# cardmhz = 368
# mhz = 368
#
# this is an example how to "read" a nagra card internal(***)
#
# [reader]
# Label = ***-Test
# Protocol = internal
# Device = /dev/sci0
# detect = CD
# mhz = 600
# cardmhz = 600
# EMMCache = 1,1,2
# group = 5
# CAID = 1702
#
# this is an example how to "read" a Viaccess card internal(SRG)
#
# [reader]
# Label = SRG
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# services = SRG
# group = 6
# CAID = 0500
# mhz = 368
#
# this is an example how to "read" a Funcard with ORF + AS-file internal
# [reader]
# Label = ORF
# Protocol = internal
# device = /dev/sci0
# detect = CD
# EMMCache = 1,3,2
# group = 7
# CAID = 0D05
#
# this is an example how to "read" a BDC internal(C+NL)
#
# [reader]
# label = C+NL
# enable = 1
# protocol = internal
# device = /dev/sci0
# caid = 0622
# force_i***** = 1
# detect = cd
# mhz = 600
# cardmhz = 600
# group = 8
# emmcache = 1,3,2
# lb_weight = 100
# boxkey = 0000000000000000
#
#######################################################################
## smargo support ##
# External reader (smargo) requires oscam LIBUSB #
# get reader serial of smargo by telnet cat /proc/bus/usb/devices #
# smargo firmware 1.04 or higher required for getting serial #
# #
#######################################################################
#
# this is an example how to "read" ICE in smargo(IR2 caid 0648)##input reader serial###
#
# [reader]
# Label = ICE
# protocol = smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 9
# force_i***** = 1
# deprecated = 1
# CAID = 0648
# rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE6708AAF97C985CBA8A6C13826963BD3092EB9FC72F773A430724706AA5E1D14E1747842D32069A12D
# boxkey = 1122334455667788
# boxid = 12345678
# cardmhz = 600
# mhz = 600
#
# this is an example how to "read" ICE in smargo(CW caid 0D95)##input reader serial###
#
# [reader]
# Label = ICE
# protocol = smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 10
# CAID = 0D95
# mhz = 257
# cardmhz = 257
#
# this is an example how to "read" a na*ra card in smargo(e.g. HD+/HD01)##input reader serial###
#
# [reader]
# Label = HD plus
# protocol = smartreader
# device = Serial:Reader XXXXX
# detect = CD
# EMMCache = 1,3,2
# group = 11
# CAID = 1830
# rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# boxkey = A7642F57BC96D37C
#
# this is an example how to "read" a nds card in smargo(*** V13)##input reader serial at XXXXX###
#
# [reader]
# label = ***_v13
# protocol = smartreader
# device = Serial:Reader XXXXX
# caid = 09C4
# boxid = 12345678
# detect = cd
# mhz = 368
# cardmhz = 368
# ident = 09C4:000000
# group = 12
# emmcache = 1,3,2
# blockemm-g = 1
#

[account]
user = amiko
group = 1,2
au = 1
betatunnel = 1833.FFFF:1702,1834.FFFF:1722

do not change nothing only on oscam cfg add the details for your n line and disale # this

copie the 3 texte and paste

Hope all ok i am going to bed soon