How to upgrade OpenPLI on nBox 5800s

is it not done via a flash page? i have no idea and am just guessing:)?

All you need to do is unzip the folder to the usb it should have 3 files named update, uImage and rootfs.img then you go through the normal update process from the box. make sure that you have the right uboot

Programming nbox enigma2!* Update NAND via USB:* - PEN must be FAT32* - Copy the files to the Peñaupdate.img* kernel.img* rootfs.img* - Pena put the tuner* - Hold the POWER button on the front panel of the power supply to the tuner* - The display shows PROG boot and later, release the power button* - Now the file will be loaded into memory update.img tuner and the script contained in it,* - If there is a problem with loading the / in the display shows FAIL* - The update will display the message:* L - 1 - loading file into memory kernel.img* S - 1 - write to the NAND kernel.img* E - 1 - if there is a mistake in the phase L - 1* L - 2 - loading file into memory rootfs.img* S - 2 - write to NAND rootfs.img* E - 2 - if there is a mistake in the phase of L - 2* - The successful completion of the script we should see-OK-** - Update time 3-4minute
Podwarunkiem that nboxie sitting uboot Freebox [uboot 1.3.1] Doing this inaction on uboocie b4team

im having problems update to open pli its stuck on updt on the screen every time i try update by usb what am i doing wrong mate
its got nobela on it etc ptk my box is sx model twin tuner

Quote from faza

Programming nbox enigma2!* Update NAND via USB:* - PEN must be FAT32* - Copy the files to the Peñaupdate.img* kernel.img* rootfs.img* - Pena put the tuner* - Hold the POWER button on the front panel of the power supply to the tuner* - The display shows PROG boot and later, release the power button* - Now the file will be loaded into memory update.img tuner and the script contained in it,* - If there is a problem with loading the / in the display shows FAIL* - The update will display the message:* L - 1 - loading file into memory kernel.img* S - 1 - write to the NAND kernel.img* E - 1 - if there is a mistake in the phase L - 1* L - 2 - loading file into memory rootfs.img* S - 2 - write to NAND rootfs.img* E - 2 - if there is a mistake in the phase of L - 2* - The successful completion of the script we should see-OK-** - Update time 3-4minute
Podwarunkiem that nboxie sitting uboot Freebox [uboot 1.3.1] Doing this inaction on uboocie b4team

Would you know what L--1 then X-01 means ?