noobs need some guide. please help.. :(

theviper0308 · May 9th 2013

hello all, im from malaysia and i totally noob in cardsharing but i know some basic in ubuntu.
i was install ubuntu 10.04 lts on my machine.
i also installed oscam 2.3.0 on my ubuntu. im following from this step : http://linuxsat-support.com/li…-ubuntu-cccam-server.html

i want to share my astro account with my family, i was buy smargo usb reader like this photo:
.
i dont know what firmware version it is.

i know my BoxID = XXXXXXXXX
this is the usb details when i type lsusb on the terminal

but im tired to figure it out. i was tried many times with no luck. :( my tv screen always and still appear "scrambled" word. :(

can someone teach me how to add the smargo readers and also teach me how to create the astro card config file for the oscam server?
the teamviewer also installed if you need to remote my ubuntu.
thank you very much. :)

theviper0308 · May 9th 2013

please help me... :(

**master G** · May 9th 2013

I don`t think this package can be shared at the moment buddy, have a look here --> http://linuxsat-support.com/ca…d-cards-astro-beyond.html..

theviper0308 · May 10th 2013

Quote from master G

I don`t think this package can be shared at the moment buddy, have a look here --> http://linuxsat-support.com/ca…d-cards-astro-beyond.html..

i want to share my old gold card not the new one called 'beyond'. :)
the old gold card still can be share.

but i dont know how to put the readers and oscam config file. can you help me bro? really appreciate it. :)

**thatfellow** · May 10th 2013

This tut by Ten Below is a good guide to configure your Smargo for cccam..

http://linuxsat-support.com/li…l-smargo-smartreader.html

theviper0308 · May 10th 2013

Quote from thatfellow

This tut by Ten Below is a good guide to configure your Smargo for cccam..

http://linuxsat-support.com/li…l-smargo-smartreader.html

this is the oscam status log:
2013/05/10 12:31:11 B775A6C0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5369 (i686-pc-linux)
2013/05/10 12:31:11 B775A6C0 s version=1.00-unstable_svn, build #5369, system=i686-pc-linux, nice=-1
2013/05/10 12:31:11 B775A6C0 s client max. idle=120 sec, debug level=0
2013/05/10 12:31:11 B775A6C0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2013/05/10 12:31:11 B775A6C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/05/10 12:31:11 B775A6C0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
2013/05/10 12:31:11 B775A6C0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/05/10 12:31:11 B775A6C0 s signal handling initialized (type=sysv)
2013/05/10 12:31:11 B775A6C0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2013/05/10 12:31:11 B775A6C0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2013/05/10 12:31:11 B775A6C0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2013/05/10 12:31:11 B775A6C0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2013/05/10 12:31:11 B775A6C0 s monitor: disabled
2013/05/10 12:31:11 B775A6C0 s camd33: disabled
2013/05/10 12:31:11 B775A6C0 s camd35: disabled
2013/05/10 12:31:11 B775A6C0 s cs378x: disabled
2013/05/10 12:31:11 B775A6C0 s newcamd: initialized (fd=6, port=10000, crypted)
2013/05/10 12:31:11 B775A6C0 s CAID: 09AC
2013/05/10 12:31:11 B775A6C0 s provid #0: 000000
2013/05/10 12:31:11 B775A6C0 s radegast: disabled
2013/05/10 12:31:11 B775A6C0 s http thread started
2013/05/10 12:31:11 B775A6C0 s creating thread for device 002:003
2013/05/10 12:31:11 B775A6C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/10 12:31:11 B775A6C0 s waiting for local card init
2013/05/10 12:31:11 B7741B70 r reader thread started (thread=B7741B70, label=astro, device=002:003, detect=cd, mhz=600, cardmhz=600)
2013/05/10 12:31:11 B7741B70 r Using 0x82 as endpoint for smartreader hardware detection
2013/05/10 12:31:11 B7741B70 r Found smartreader device 002:003
2013/05/10 12:31:11 B774DB70 h HTTP Server listening on port 19999
2013/05/10 12:31:11 B7741B70 r astro card detected

so what should i do next? thank you.. :)

**thatfellow** · May 10th 2013

Have you tried latest SVN version of oscam?

Can you post your oscam.server [reader]..

theviper0308 · May 10th 2013

Quote from thatfellow

Have you tried latest SVN version of oscam?

Can you post your oscam.server [reader]..

i have tried to install the oscam 2.3.0 but i cant get webif running and i dont know i have properly install the oscam or not.
so i follow this another install script:
TUTORIAL - CCcam+Oscam Automated Installation Ubuntu/ Debian

my config file:

oscam.server

Code

[reader]
label = astro
protocol = smartreader
device = 002:003
#if you use smartreader and device with a bus id, hash out detect as its not needed.
#detect = cd
cardmhz = 600
mhz = 600
boxid = ########
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 09AC

Display More

oscam.conf

Code

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1




[webif]
httpport = 19999
httpuser = root
httppwd = root
httpallowed = 0.0.0.0-255.255.255.255
#httprefresh = 3




# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@09AC:000000;

Display More

oscam.user

Code

[account]
user = cccam
pwd = cccam
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 09AC

thanks!

**thatfellow** · May 10th 2013

Remove BoxID and any sensitive info when posting to forum m8..

2013/05/10 12:31:11 B775A6C0 s provid #0: 000000
This log line looks strange to me but I don't know enough about it to be sure!

Oscam.server

Code

[reader]
label = astro
protocol = smartreader
device = 002:003
#if you use smartreader and device with a bus id, hash out detect as its not needed.
#detect = cd
cardmhz = 600
mhz = 600
boxid = ########
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 09AC
[COLOR='#FF0000']ident = 09AC:000000[/COLOR]

Display More

oscam.conf

Code

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
 
[webif]
httpport = 19999
httpuser = [COLOR='#00FF00']root[/COLOR] #Change to more Secure Username
httppwd = [COLOR='#00FF00']root[/COLOR] #Change to more Secure Password
httpallowed =  [COLOR='#00FF00']0.0.0.0-255.255.255.255[/COLOR] #Open to any IP,  Change to safe range. e.g. "127.0.0.1, 192.168.0.0-192.168.255.255"
#httprefresh = 3
 
# protocols
[newcamd]
key = 0102030405060708091011121314
port = [COLOR='#00FF00']10000[/COLOR]@09AC:000000; #This is a standard Port, Change to random port

Display More

*

oscam.user

Code

[account]
user = [COLOR='#00FF00']cccam[/COLOR] #Change to more Secure Username
pwd = [COLOR='#00FF00']cccam[/COLOR] #Change to more Secure Password
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 09AC

Add/edit lines in Red
Optional: Update security Lines in green & post back.

I have been reading up on this card, I have seen a fix for it but I cant find any records of that fix being implemented into oscam SVN..

theviper0308 · May 10th 2013

Quote from thatfellow
Remove BoxID and any sensitive info when posting to forum m8..

Also, change all user/passwords/portnumbers from default to make your server more secure..

This log line looks strange to me but I don't know enough about it to be sure!
Code
[reader]
label = astro
protocol = smartreader
device = 002:003
#if you use smartreader and device with a bus id, hash out detect as its not needed.
#detect = cd
cardmhz = 600
mhz = 600
boxid = ########
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 09AC
[COLOR='#FF0000']ident = 09AC:000000[/COLOR]
Display More
Add/edit lines in Red and post back.
I have been reading up on this card, I have seen a fix for it but I cant find any records of that fix being implemented into oscam SVN..
Display More

sorry im forgot to delete the boxid. thanks mod for help to edit my post. :)

i've add the ident = 09ac:000000

when i restart the ubuntu, oscam log is like this:
2013/05/10 18:17:32 B78006C0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5369 (i686-pc-linux)
2013/05/10 18:17:32 B78006C0 s version=1.00-unstable_svn, build #5369, system=i686-pc-linux, nice=-1
2013/05/10 18:17:32 B78006C0 s client max. idle=120 sec, debug level=0
2013/05/10 18:17:32 B78006C0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2013/05/10 18:17:32 B78006C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/05/10 18:17:32 B78006C0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
2013/05/10 18:17:32 B78006C0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/05/10 18:17:32 B78006C0 s signal handling initialized (type=sysv)
2013/05/10 18:17:32 B78006C0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2013/05/10 18:17:32 B78006C0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2013/05/10 18:17:32 B78006C0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2013/05/10 18:17:32 B78006C0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2013/05/10 18:17:32 B78006C0 s monitor: disabled
2013/05/10 18:17:32 B78006C0 s camd33: disabled
2013/05/10 18:17:32 B78006C0 s camd35: disabled
2013/05/10 18:17:32 B78006C0 s cs378x: disabled
2013/05/10 18:17:32 B78006C0 s newcamd: initialized (fd=6, port=10000, crypted)
2013/05/10 18:17:32 B78006C0 s CAID: 09AC
2013/05/10 18:17:32 B78006C0 s provid #0: 000000
2013/05/10 18:17:32 B78006C0 s radegast: disabled
2013/05/10 18:17:32 B78006C0 s http thread started
2013/05/10 18:17:32 B78006C0 s creating thread for device 002:003
2013/05/10 18:17:32 B78006C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/10 18:17:32 B78006C0 s waiting for local card init
2013/05/10 18:17:32 B77F3B70 h HTTP Server listening on port 19999
2013/05/10 18:17:32 B77E7B70 r reader thread started (thread=B77E7B70, label=astro, device=002:003, detect=cd, mhz=600, cardmhz=600)
2013/05/10 18:17:32 B77E7B70 r Using 0x82 as endpoint for smartreader hardware detection
2013/05/10 18:17:32 B77E7B70 r Found smartreader device 002:003
2013/05/10 18:17:33 B77E7B70 r astro card detected

**thatfellow** · May 10th 2013

OK m8, I would start by updating oscam to latest svn..

Here are the changes inplemented for your CAID
Search Results ? OSCam

I do not see any mention of the fix posted here:

Code

http://www.tvrofans.org/archiver/tid-26431.html

Have you any friends or contacts that have successfully shared this card?

theviper0308 · May 10th 2013

Quote from thatfellow
OK m8, I would start by updating oscam to latest svn..

Here are the changes inplemented for your CAID
Search Results ? OSCam

I do not see any mention of the fix posted here:
Code
http://www.tvrofans.org/archiver/tid-26431.html
Have you any friends or contacts that have successfully shared this card?
Display More

many people in my country have successful sharing this card. but they dont want to share the setup/config with me. :(

**thatfellow** · May 10th 2013

This could easily be a problem with your dated version of oscam PM Sent

theviper0308 · May 10th 2013

Quote from thatfellow

This could easily be a problem with your dated version of oscam PM Sent

PM replied. thank you very much m8! :)

theviper0308 · May 10th 2013

Quote from thatfellow

This could easily be a problem with your dated version of oscam PM Sent

m8 the ubuntu was rebooted.

this is the oscam status log:
2013/05/10 21:01:33 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8641 (i486-linux-gnu-libusb-pcsc)
2013/05/10 21:01:33 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1784
2013/05/10 21:01:33 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/05/10 21:01:33 0 s signal handling initialized
2013/05/10 21:01:33 0 s newcamd: initialized (fd=4, port=10000)
2013/05/10 21:01:33 0 s -> CAID: 09AC PROVID: 1F1F1F, 1F1F1F, 000000
2013/05/10 21:01:33 0 s astro [smartreader] creating thread for device 001:003
2013/05/10 21:01:33 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/10 21:01:33 0 s waiting for local card init
2013/05/10 21:01:33 957BAF0 r astro [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/05/10 21:01:33 957BAF0 r Found smartreader device 001:003
2013/05/10 21:01:33 957EBA0 h webif: decompressed 52704 bytes back into 150580 bytes
2013/05/10 21:01:33 957EBA0 h HTTP Server listening on port 20000
2013/05/10 21:01:33 957BAF0 r astro [smartreader] Reader initialized (device=001:003, detect=cd, mhz=600, cardmhz=600)
2013/05/10 21:01:34 957BAF0 r astro [smartreader] card detected
2013/05/10 21:01:37 957BAF0 r astro [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2013/05/10 21:01:37 957BAF0 r astro [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=3
2013/05/10 21:01:37 957BAF0 r astro [smartreader] Calculated work ETU is 62.00 us

the teamviewer id and password PM'ed to your inbox. thank you... :)

theviper0308 · May 10th 2013

latest oscam status log

2013/05/10 21:28:49 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8641 (i486-linux-gnu-libusb-pcsc)
2013/05/10 21:28:49 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3509
2013/05/10 21:28:49 0 s signal handling initialized
2013/05/10 21:28:49 0 s newcamd: initialized (fd=4, port=10000)
2013/05/10 21:28:49 0 s -> CAID: 09AC PROVID: 1F1F1F, 1F1F1F, 000000
2013/05/10 21:28:49 0 s astro [smartreader] creating thread for device 001:003
2013/05/10 21:28:49 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/10 21:28:49 0 s waiting for local card init
2013/05/10 21:28:49 957BCE0 h webif: decompressed 52704 bytes back into 150580 bytes
2013/05/10 21:28:49 957BCE0 h HTTP Server listening on port 20000
2013/05/10 21:28:49 9577C38 r astro [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/05/10 21:28:49 9577C38 r Found smartreader device 001:003
2013/05/10 21:28:49 9577C38 r astro [smartreader] Reader initialized (device=001:003, detect=cd, mhz=600, cardmhz=600)
2013/05/10 21:28:50 9577C38 r astro [smartreader] card detected
2013/05/10 21:28:53 9577C38 r astro [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2013/05/10 21:28:53 9577C38 r astro [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=3
2013/05/10 21:28:53 9577C38 r astro [smartreader] Calculated work ETU is 62.00 us
2013/05/10 21:28:54 9577C38 r astro [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 6.00 Mhz (specified in reader->mhz)
2013/05/10 21:28:55 9577C38 r astro [smartreader] Card type: AZTV
2013/05/10 21:28:55 9577C38 r astro [smartreader] Rom version: 10A6
2013/05/10 21:28:57 9577C38 r astro [smartreader] parental lock setting: FF FF 00 00
2013/05/10 21:28:57 9577C38 r astro [smartreader] type: VideoGuard Astro Malaysia (09AC), caid: 09AC
2013/05/10 21:28:57 9577C38 r astro [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2013/05/10 21:28:57 9577C38 r astro [smartreader] ready for requests
2013/05/10 21:28:57 9577C38 r astro [smartreader] found card system videoguard2
2013/05/10 21:28:57 9577C38 r astro [videoguard2] card detected
2013/05/10 21:28:57 9577C38 r astro [videoguard2] type: VideoGuard Astro Malaysia (09AC)
2013/05/10 21:28:57 9577C38 r astro [videoguard2] tier: 0035, expiry date: 2013/06/13-00:01:00
2013/05/10 21:28:57 9577C38 r astro [videoguard2] tier: 0068, expiry date: 2013/06/13-00:01:00
2013/05/10 21:28:57 9577C38 r astro [videoguard2] tier: 00e6, expiry date: 2013/06/13-00:01:00
2013/05/10 21:28:57 9577C38 r astro [videoguard2] tier: 00e7, expiry date: 2013/06/13-00:01:00
2013/05/10 21:28:57 9577C38 r astro [videoguard2] tier: 00ec, expiry date: 2013/06/13-00:01:00
2013/05/10 21:28:57 9577C38 r astro [videoguard2] tier: 00f3, expiry date: 2013/06/13-00:01:00
2013/05/10 21:28:57 9577C38 r astro [videoguard2] tier: 00fa, expiry date: 2013/06/13-00:01:00
2013/05/10 21:28:58 0 s init for all local cards done
2013/05/10 21:28:58 0 s anti cascading disabled

what should i do next? ... :(

**thatfellow** · May 10th 2013

OK, well oscam is reading your card & entitlements are showing. Your next step is to test a line from your server in your receiver..

To do this add F:Line to cccam.cfg on server

F: username password

And then add the corrosponding C:Line to cccam.cfg in your box

C: 192.168.1.100 9999 username password

Your Server IP or dns address
Your cccam Port Number from cccam.cfg

theviper0308 · May 10th 2013

where is the cccam.cfg file?
ive search the harddrive an found the cccam.cfg in:
/var/etc/CCcam.cfg

Code

WEBINFO LISTEN PORT : 19999
SERVER LISTEN PORT : 9999
WEBINFO USERNAME : root
WEBINFO PASSWORD : root
ALLOW WEBINFO : yes
SHOW TIMING : yes
NEWCAMD CONF : no
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
########################################################################
N: 127.0.0.1 10003 astro astro 01 02 03 04 05 06 07 08 09 10 11 12 13 14
########################################################################
F: user1 pass1
F: user2 pass2
F: user3 pass3
F: user4 pass4
F: user5 pass5

Display More

my server ip = 192.168.1.103
dns = permaihotspot.webhop.org

so how to test it m8?

thank you.. :)

**thatfellow** · May 10th 2013

OK, so in cccam.cfg on your Ubuntu Server add:
F: username password

and in your box

C: permaihotspot.webhop.org portno username password

Not sure what your cccam port number is on your Ubuntu Server, is it 9999 as shown above or is that the CCcam.cfg from your box?

theviper0308 · May 10th 2013

:(

2013/05/11 02:10:28 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:ED6C046B345491DE6C0BA69EF3CCFF9D): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:10:38 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:7229E6AFFCE7E35172EA2FD65988AA7A): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:10:48 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:95C4A8E7BC0F2099330E10E1BB55CD8C): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:10:58 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:69A323997B899C9E3CA563F1BAA6BEF6): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:11:08 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:3E426E9F9F9FA23AB758BFC7B0CFCFD9): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:11:18 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:9BA2A767B7AE1CF5717222A6E1E53D51): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:11:28 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:DFD3BAEEE00F9D4750DA5BC039E45735): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:11:38 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:F461CA3237C2A5BC466373BCEE51CD0E): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:11:48 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:79C7BF45ACC98DEC13BBDA7B794FBF7B): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:11:58 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:156749838BE7E2A411CB6FBC3874CEF9): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:12:08 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:7A333D2EE42F8CB23BA44CAA361B6F05): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:12:18 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:324197853830858FF89B114D8E211A9A): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:12:28 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:66F0D6BBA39B287DE425B16473E4C647): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:12:38 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:FE234AC2187BD21D29D9919219AB8F24): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:12:48 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:8051167391B58357234F290EADB5C997): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:12:58 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:9E2FA2F3FD6CE604693D3A6FE38BB6C7): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:13:08 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:6F828CA7F19A76F1288A0C16B39CE9A2): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:13:18 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:CEC9EF88BD601ACD5CBC5FDAB8899F2B): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:13:28 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:869008605D3C2039BD4B1146249D345D): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:13:38 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:724124E3058987F4C3D9A9BC28CC5C96): rejected group (1 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:13:48 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:0D7ABF5B11760057FD078F0E9D2971B0): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:13:58 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:08A52C0B932947A3EFDD9EB8F011065F): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:14:08 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:DDBD7182316809B1E1EB157ED893DFF5): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/05/11 02:14:18 8E9CCF8 c astro (09AC&000000/0000/4FBA/B7:A13671ADCA57AEADB60D914AF39AB697): rejected group (0 ms) (0/0/0/0) (no matching reader)

noobs need some guide. please help.. :(

Participate now!

Share

Tags