I wondered if anyone can help me please I'm using blackhole 2.0.2 image backup by Tenbelow with oscam8570 and dvbapi configured for white card but can't seem to get it working with my card, when I put my card in it just isn't decrypting channels but in the oscam webif its finding the card and entitlements? If someone could help me that would be great as I've been trying to get it working for ages now, also is 8570 the best version to use?
Oscam8570 dvbapi help please
-
- General OSCam
- ste141
- Closed
- Thread is marked as Resolved.
-
-
-
posted my introduction:-)
-
Would you like to know my oscam config?
-
Yes please bud, post your configs removing any passwords etc.
-
oscam.conf
[global]
logfile = std
nice = -1
maxlogsize = 0
preferlocalcards = 1
failbantime = 1440
failbancount = 5[dvbapi]
enabled = 1
au = 1
user = user
boxtype = dreambox
pmt_mode = 0[monitor]
port = 988
aulow = 120
monlevel = 1[webif]
httpport = 17000
httpuser = user
httppwd = ***
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
aulow = 120oscam.server
[reader]
label = ***uk
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
mhz = 357
cardmhz = 357
caid = 0963
ident = 0963:000000
group = 1
cacheex = 1
emmcache = 1,3,2
ecmcache = 1
dropbadcws = 1
blockemm-g = 1
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
lb_weight = 101
ecmwhitelist = 0963:16,27,2B,2E,34,36,3B,3D,3E,41,42,44,45,47,4B,4E,4F,50,51,53,54,56,57,58,59,5D,5E,5F,60,61,62,63,64,65,66,67,68,69,6A,6B,6C,6D,6E,6F,70,71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,82,84,85,89,8B,8F,99,9B,9C,9F,A2,A8,AC,AD,AE,B0,B4,B7oscam.user
[account]
user = user
pwd = ****
uniq = 2
monlevel = 1
caid = 0963
ident = 0963:000000
group = 1
au = ***uk
blockemm-unknown = 1
blockemm-g = 1
blockemm-u = 0
blockemm-s = 0
cacheex =
suppresscmd08= 0I only have these 3 files in tuxbox but I heard that there should be a dvbapi file is this correct?
Thanks,
-
If you want to use dvbapi then you will need the dvbapi file in your oscam config folder in tuxbox.
Also try your configs with the whitelist removed, see what happens.
-
do I not need the whitelist then ? where would I get the dvbapi file from? Regards
-
do I not need the whitelist then ? where would I get the dvbapi file from? Regards
Its up to you if you use the whitelist or not, waste of time imo.
You can generate an oscam.dvapi file here, the content is updated daily.Here is today's.
-
Ok I've added the dvbapi file and it worked but only decrypted one channel then when I changed channel it stopped decrypting any ideas as to why?
-
2013/05/10 14:42:14 511DA0 r ***uk [internal] card detected
2013/05/10 14:42:15 511DA0 r ***uk [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2013/05/10 14:42:15 511DA0 r ***uk [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2013/05/10 14:42:15 511DA0 r ***uk [internal] Calculated work ETU is 18.60 us
2013/05/10 14:42:17 511DA0 r ***uk [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2013/05/10 14:42:19 511DA0 r ***uk [internal] Card type: SYAV
2013/05/10 14:42:19 511DA0 r ***uk [internal] Rom version: 40LF
2013/05/10 14:42:19 511DA0 r ***uk [internal] parental lock setting: FF FF 0E 00
2013/05/10 14:42:19 511DA0 r ***uk [internal] type: VideoGuard B***B (0963), caid: 0963
2013/05/10 14:42:19 511DA0 r ***uk [internal] serial: ########, BoxID: ########, baseyear: 1997
2013/05/10 14:42:19 511DA0 r ***uk [internal] ready for requests
2013/05/10 14:42:19 511DA0 r ***uk [internal] found card system videoguard2
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] card detected
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] type: VideoGuard B***B (0963)
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 0003, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 000b, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 0010, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 001d, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 30e1, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 30e2, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b732, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b736, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b765, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b766, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b772, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b773, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b846, expiry date: 2013/06/22-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b848, expiry date: 2013/06/22-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b860, expiry date: 2013/06/22-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b8d2, expiry date: 2013/06/22-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b968, expiry date: 2013/07/06-01:00:00Thats my log
-
2013/05/10 14:42:14 511DA0 r ***uk [internal] card detected
2013/05/10 14:42:15 511DA0 r ***uk [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2013/05/10 14:42:15 511DA0 r ***uk [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2013/05/10 14:42:15 511DA0 r ***uk [internal] Calculated work ETU is 18.60 us
2013/05/10 14:42:17 511DA0 r ***uk [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2013/05/10 14:42:19 511DA0 r ***uk [internal] Card type: SYAV
2013/05/10 14:42:19 511DA0 r ***uk [internal] Rom version: 40LF
2013/05/10 14:42:19 511DA0 r ***uk [internal] parental lock setting: FF FF 0E 00
2013/05/10 14:42:19 511DA0 r ***uk [internal] type: VideoGuard B***B (0963), caid: 0963
2013/05/10 14:42:19 511DA0 r ***uk [internal] serial: ########, BoxID: ########, baseyear: 1997
2013/05/10 14:42:19 511DA0 r ***uk [internal] ready for requests
2013/05/10 14:42:19 511DA0 r ***uk [internal] found card system videoguard2
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] card detected
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] type: VideoGuard B***B (0963)
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 0003, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 000b, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 0010, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 001d, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 30e1, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: 30e2, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b732, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b736, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b765, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b766, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b772, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b773, expiry date: 2013/07/06-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b846, expiry date: 2013/06/22-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b848, expiry date: 2013/06/22-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b860, expiry date: 2013/06/22-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b8d2, expiry date: 2013/06/22-01:00:00
2013/05/10 14:42:19 511DA0 r ***uk [videoguard2] tier: b968, expiry date: 2013/07/06-01:00:00Thats my log
That just shows oscam firing up buddy, can you post from when trying to open the channels please.
-
the log doesn't change when i try opening channels
-
Alrite I found out it was the ecmwhitelist but it is not opening the hd channels or movies do you know why?
-
2013/05/10 15:14:39 51C390 c [ADD PID 0] CAID: 0960 ECM_PID: 0502 PROVID: 000000
2013/05/10 15:14:39 51C390 c [ADD PID 1] CAID: 0961 ECM_PID: 0502 PROVID: 000000
2013/05/10 15:14:39 51C390 c [ADD PID 2] CAID: 0963 ECM_PID: 0502 PROVID: 000000
2013/05/10 15:14:39 51C390 c [ADD STREAM 0] CAID: 0960 ECM_PID: 0502 PROVID: 000000
2013/05/10 15:14:39 51C390 c [ADD STREAM 1] CAID: 0961 ECM_PID: 0502 PROVID: 000000
2013/05/10 15:14:39 51C390 c [ADD STREAM 2] CAID: 0963 ECM_PID: 0502 PROVID: 000000
2013/05/10 15:14:39 51C390 c [ADD STREAM 0] CAID: 0960 ECM_PID: 0502 PROVID: 000000
2013/05/10 15:14:39 51C390 c [ADD STREAM 1] CAID: 0961 ECM_PID: 0502 PROVID: 000000
2013/05/10 15:14:39 51C390 c [ADD STREAM 2] CAID: 0963 ECM_PID: 0502 PROVID: 000000
2013/05/10 15:14:39 51C390 c Found 3 ECMpids and 4 STREAMpids in PMT
2013/05/10 15:14:39 51C390 c New program number: 0EF7 (0960:0EF7 unknown) [pmt_list_management 3]
2013/05/10 15:14:39 511DA0 r ***uk [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2013/05/10 15:14:39 51C390 c user (0963&000000/0000/0EF7/7D:627B0D17D7C5DE50932296D587B7EC7F): not found (91 ms) by ***uk
2013/05/10 15:14:39 51C390 c user (0960&000000/0000/0EF7/7D:00000000000000000000000000000000): rejected caid (0 ms) (0/0/0/0) (invalid caid 0x0960)
2013/05/10 15:14:39 51C390 c user (0961&000000/0000/0EF7/7D:00000000000000000000000000000000): rejected caid (0 ms) (0/0/0/0) (invalid caid 0x0961)
2013/05/10 15:14:39 51C390 c user (0963&000000/0000/0EF7/7D:627B0D17D7C5DE50932296D587B7EC7F): not found (1 ms) by ***uk
2013/05/10 15:14:40 51C390 c user (0960&000000/0000/0EF7/7D:00000000000000000000000000000000): rejected caid (0 ms) (0/0/0/0) (invalid caid 0x0960)
2013/05/10 15:14:40 51C390 c user (0961&000000/0000/0EF7/7D:00000000000000000000000000000000): rejected caid (0 ms) (0/0/0/0) (invalid caid 0x0961)
2013/05/10 15:14:40 51C390 c user (0963&000000/0000/0EF7/7D:627B0D17D7C5DE50932296D587B7EC7F): not found (1 ms) by ***uk
2013/05/10 15:14:40 51C390 c user (0960&000000/0000/0EF7/7D:00000000000000000000000000000000): rejected caid (0 ms) (0/0/0/0) (invalid caid 0x0960)
2013/05/10 15:14:40 51C390 c ERROR: Can't decode channel
2013/05/10 15:14:40 51C390 c user (0961&000000/0000/0EF7/7D:00000000000000000000000000000000): rejected caid (0 ms) (0/0/0/0) (invalid caid 0x0961)
Thats the log when trying the open a hd channel -
How were your sly card entitlements updated last time buddy? was the card in your sly box or was it done through your server?
-
In sly box because I was using CCcam before but it wasn't updating so I wanted to get dvbapi working to see if they update using that. All channels are opening now except from movies and hd I can see from the log that when I change to a hd or movie channel it says something about caid 0961 which is the old card isn't it?
-
You done for m8 big mistake putting it in the slybox its been updated :doubt:
-
I was told you can put it back in the box to update then move it back to vu?
-
Who told you that not sly i hope , there has been recent changes stopping this it was a previous practice but not advisable now , this is the issue you have now you wont open hd sport or movies
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!