Oscam 1.0 4.7 Gemini Enigma 1
Hey!
Have manuel instal Oscam 1.0 to my Gemini 4.7 to DM7020S.Have picture on CanalDigital but black screen on Viasat.Har Viasat upper reader / CD in the lower reader
Have the same file DM800Se with OpenPli 2.1 beta, here read both cards with Viasat in the upper reader / CD in the lower reading.
Someone who sees what is wrong: question:
Oscam server:
# Oscam.server generated automatically, by Stream Board OSCAM 1.00-unstable_svn build # 5630
# Read more: gmc.to - Informationen zum Thema satellite tv. ... scam.server.txt
[Reader]
label = lower_canaldigital
enable = 1
protocol = internal
device = / dev/sci0
detect = cd
mhz = 500
cardmhz = 500
caid = 0B00
ident = 0B00: 000000
services =
group = 1
emmcache = 1,3,15
lb_weight = 100
cccreshare = 3
audisabled = 0
# Uncomment and enable this lines below only if devices are presented
[Reader]
label = upper_viasat
enable = 1
protocol = internal
device = / dev/sci1
detect = cd
mhz = 500
cardmhz = 500
caid = 090F
ecmwhitelist = 090F: 88.84, AA, A6, 68.98
ident = 090F: 000000
services =
boxid = xxxxxxxx (Posted hex here)
group = 2
emmcache = 1,3,2
lb_weight = 100
cccreshare = 3
audisabled = 0
blockemm-g = 1
# [Reader]
# Label = smart reader
# Enable = 0
# Protocol = mouse
# Dreambox kernel does not support smart reader protocol so use mouse and set speed with ttyS0 tool
# For devices with boxes libusb1.0.6 or greater and kernel above 2.6.30 use smart reader
# Device = / dev/ttyUSB0
# For smart reader protocol use bus: device
# Bus: device bus name and device name of the Smart Reader +
# (Get the names with lsusb 'Bus' and 'Device')
# Detect = cd
# Mhz = 600
# Do not use with mouse do use with smart reader protocol
# Cardmhz = 600
# Do not use with mouse do use with smart reader protocol
# Caid =
# Ident =
# Services =
# Group = 3
# Emmcache = 1,3,15
# Lb_weight = 100
# Cccreshare = 3
# Audisabled = 0
# Uncomment and adapt to your needs the readers below this line or ad extra ones.
# [Reader]
# Label = pcserverlocalnetwork
# Enable = 1
# Protocol = CCcam
# Device = 192.168.123.9,12000
# Account = user
# Password = pasword
# Reconnecttimeout = 1
# Group = 5
# Emmcache = 1,2,15
# Lb_weight = 100
# Cccversion = 2.2.1
# Cccmaxhops = 5
# Ccckeepalive = 1
# Cccreshare = 3
# Audisabled = 0
# CCcam on it would be a C line like:
# C: 192.168.123.9 12000 user pasword no {0:0:5}
# [Reader]
# Label = remoteccampeer
# Enable = 1
# Protocol = CCcam
# Device = cccam.example.cx, 12925
# Account = user
# Password = password
# Services =! Service1,! Service2
# (The ignored channel providers or see oscam.services)
# Reconnecttimeout = 2
# Group = 12
# Lb_weight = 100
# Cccmaxhops = 5
# Cccreshare = 3
# Ccckeepalive = 1
# Audisabled = 1
# The best is for NOT sending emm's to remote CCcam peers
# Cccversion = 2.2.1
# CCcam on it would have been a c line like:
# C: cccam.example.cx 12925 user password no {0:0:5}