Ultra power led blinks red orange green over and over

Quote from oldhat

Hi

My azbox ultra started doing menu all by it's self went into setup then rebooting now only power led blinks red orange green , no video.

Is it trying to update?

will pulling the battery out then back in help?

will how to recover booting azbox how to fix this?

Bill

Display More

Hi Bill,
Sorry my knowledge of azbox is pretty much none existent but googling your problem i found this,

1) Reboot the receiver by the switch on the back of the unit.

After it powers up and you see the menu rolling, follow these steps:

2) Down Arrow 6 Times

3) Hit the OK button

4) Right Arrow 1 Time

5) Down Arrow 1 Time

6) Right Arrow 1 Time

You will now have changed the setting in the Menu from PAL, back to NTSC.

7) The receiver will ask you if you want to save your change and say YES.

Failing that in your position i would do a reflash of the latest firmware buddy.

Good luck.