settings for card to update entitlements correctly

There are 12 replies in this Thread which was already clicked 3,222 times. The last Post () by dixiedean.

    do i need to alter setttings in oscam for sly card to update entitlements using oscam cccam, I've changed the line in cccam cfg
    DEBUG : yes
    NEWCAMD CONF : yes
    DISABLE EMM : no
    #EXTRA EMM LEVEL : yes
    is this all i need to do for card to correctly update, ive had in dm 500 for 3 days now and its not updating

    • Official Post
    Quote from dixiedean

    do i need to alter setttings in oscam for sly card to update entitlements using oscam cccam, I've changed the line in cccam cfg
    DEBUG : yes
    NEWCAMD CONF : yes
    DISABLE EMM : no
    #EXTRA EMM LEVEL : yes
    is this all i need to do for card to correctly update, ive had in dm 500 for 3 days now and its not updating


    You are using CCcam only?


    What you have posted tells us nothing mate, 3 days without emm is not a long time so if it was working before my advice is to be patient buddy.

    ive always used original receiver to update so i dont know if its gonna work, im using oscam cccam and i just need to know if i need to alter any of the oscam settings aswell as the ones ive shown u on the cccam cfg?

    Since you try to update a card remotely (CCcam client with card on OScam server) you should perhaps check the emmreassembly parameter which can prevent the card update if the client already performed the emmreassembly.
    If you are fully local (OScam is handling both DVBAPI and the cards) the default value for emmreassembly is the right one.

    Error activating card.
    2013/08/11 10:25:33 ****** r Error activating card.
    2013/08/11 10:25:33 ****** r Error activating card.
    2013/08/11 10:25:34 ****** r card initializing error
    2013/08/11 10:27:03 ****** c linuxsat (0963&000000*********): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:000000)
    2013/08/11 10:27:47 ****** c linuxsat (0963&000000/*********): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:000000)
    2013/08/11 10:30:40 ****** c linuxsat (0963&000000**********): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:000000)
    2013/08/11 10:31:23 ****** c linuxsat (0963&000000/*********): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:000000)
    2013/08/11 10:33:33 ****** c linuxsat (0963&000000/**********): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:000000)
    2013/08/11 10:34:27 ****** c linuxsat (0963&000000/**********): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:000000)
    2013/08/11 10:35:40 ****** c linuxsat (0963&000000/**********): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:000000)
    2013/08/11 10:42:22 ****** c linuxsat (0963&000000/**********): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:000000)
    2013/08/11 10:42:27 ****** c linuxsat (0963&000000/**********rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:000000)
    2013/08/11 10:50:47 ****** c linuxsat (0963&000000/**********): rejected user ident (0 ms) (of 0 avail 0) (no card support 0963:000000)


    is this normal for a card that hasnt taken the entitlement update master g? as ive used your configs thanks but still no joy as of yet. is it just a case of waiting?

    they ran out a week or so ago, only just found out about the pairing method otherwise i wouldnt of let it run out, i normally use my other card when one runs out but that card has now been paired

    2013/08/11 17:13:05 s client max. idle=120 sec, debug level=0
    2013/08/11 17:13:05 s max. logsize=10 Kb
    2013/08/11 17:13:05 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
    2013/08/11 17:13:05 s auth size=5008
    2013/08/11 17:13:05 s services reloaded: 0 services freed, 2 services loaded
    2013/08/11 17:13:05 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2013/08/11 17:13:05 s signal handling initialized (type=sysv)
    2013/08/11 17:13:05 s oscam.srvid loading failed, old format
    2013/08/11 17:13:05 s 3 tier-id's loaded
    2013/08/11 17:13:05 s 4 provid's loaded
    2013/08/11 17:13:05 s 1 lengths for caid guessing loaded
    2013/08/11 17:13:05 s monitor: disabled
    2013/08/11 17:13:05 s camd33: disabled
    2013/08/11 17:13:05 s camd35: disabled
    2013/08/11 17:13:05 s cs378x: disabled
    2013/08/11 17:13:05 s newcamd: disabled
    2013/08/11 17:13:05 s cccam: initialized (fd=8, port=12000, crypted)
    2013/08/11 17:13:05 s radegast: disabled
    2013/08/11 17:13:05
    s http thread started
    2013/08/11 17:13:05 s creating thread for device /dev/sci0
    2013/08/11 17:13:05 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/08/11 17:13:05 s waiting for local card init
    2013/08/11 17:13:05 h HTTP Server listening on port 16002
    2013/08/11 17:13:05 r reader thread started (thread=, label=***uk, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
    2013/08/11 17:13:05 r ***uk card detected
    2013/08/11 17:13:05 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
    2013/08/11 17:13:06 r ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


    2013/08/11 17:13:08 r found cardsystem videoguard2
    2013/08/11 17:13:08 r [videoguard2-reader] ***uk card detected
    2013/08/11 17:13:08 r [videoguard2-reader] type: VideoGuard B***B (0963)
    2013/08/11 17:13:11 s init for all local cards done
    2013/08/11 17:13:11 s anti cascading disabled
    2013/08/11 17:13:11 c plain dvbapi-client granted (linuxsatsupport, au=on (1 reader))
    2013/08/11 17:13:11 c dvbapi: 1 entries read from oscam.dvbapi
    2013/08/11 17:13:11 c dvbapi: found pmt file /tmp/pmt.tmp
    2013/08/11 17:13:11 c dvbapi: [ADD PID 0] CAID: 0963 ECM_PID: 051F PROVID: 000000
    2013/08/11 17:13:11 c dvbapi: [ADD PID 1] CAID: 0961 ECM_PID: 051F PROVID: 000000
    2013/08/11 17:13:11 c dvbapi: [ADD PID 2] CAID: 0960 ECM_PID: 051F PROVID: 000000
    2013/08/11 17:13:11 c dvbapi: new program number: 1205 (0963:1205 unknown)
    2013/08/11 17:13:11 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/08/11 17:13:11 c linuxsatsupport (0963&000000/1205/5F:6B5A): not found (67 ms) by ***uk (of 1 avail 1) - 0963:1205 unknown
    2013/08/11 17:13:11 c linuxsatsupport (0961&000000/1205/5F:6B5A): rejected caid (121 ms) (of 0 avail 0) - 0961:1205 unknown (invalid caid 961)
    2013/08/11 17:13:12 c dvbapi: try pids again #1
    2013/08/11 17:13:12 c linuxsatsupport (0960&000000/1205/5F:6B5A): rejected caid (121 ms) (of 0 avail 0) - 0960:1205 unknown (invalid caid 960)
    2013/08/11 17:13:12 c linuxsatsupport (0963&000000/1205/5F:6B5A): not found (121 ms) by ***uk (of 1 avail 1) - 0963:1205 unknown
    2013/08/11 17:13:12 c linuxsatsupport (0961&000000/1205/5F:6B5A): rejected caid (121 ms) (of 0 avail 0) - 0961:1205 unknown (invalid caid 961)
    2013/08/11 17:13:12 c dvbapi: try pids again #2
    2013/08/11 17:13:12 c linuxsatsupport (0960&000000/1205/5F:6B5A): rejected caid (121 ms) (of 0 avail 0) - 0960:1205 unknown (invalid caid 960)
    2013/08/11 17:13:12 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/08/11 17:13:12 c linuxsatsupport (0963&000000/1205/5F:5FCD): not found (61 ms) by ***uk (of 1 avail 1) - 0963:1205 unknown
    2013/08/11 17:13:12 c linuxsatsupport (0961&000000/1205/5F:5FCD): rejected caid (107 ms) (of 0 avail 0) - 0961:1205 unknown (invalid caid 961)
    2013/08/11 17:13:13 c dvbapi: try pids again #3
    2013/08/11 17:13:13 c dvbapi: can't decode channel
    2013/08/11 17:13:13 c linuxsatsupport (0960&000000/1205/5F:5FCD): rejected caid (121 ms) (of 0 avail 0) - 0960:1205 unknown (invalid caid 960)


    can u see anything conclusive in there master g?

    Quote from master G

    Oscam is the card reader in your setup, so nothing needs altered in CCcam.cfg..


    The attached configs update entitlements 100% of the time without fail..






    hi mg again, ive use the configs u sent for me and they work great ive used it on mine and my mate who was having probs used it on his but it seems we keep losing connection to cccam seems to go off the same time early hours of the morning, a reboot soon sorts it, ive not touched the configs part from debugging on the cccam cfg which ive turned of we are both using dm500s, my old configurations never went off or rarely lets say but they never allowed emmms is this what it is or is that just coincidence??? your help again would be appreciated

  • master G

    Set the Label from UK OSCam to Videoguard2 Cards OSCam

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login