hi guys, my server running whit ubuntu auto oscam/cccam :http://linuxsat-support.com/li…-1-3-install-package.html
thanks for thatfellow and ten bellow
is work whit smargo reader and prob is:
very big ping 0.426ms but when client connnect to my server [whit Nline] frome non UK, any different country [germany,france......]
ping is come higher about frome 0423ms~1.200ms and is start glich and freez for him
how is possible make ping about 0.200ms
help pls guys whit oscam...ping
- Tigriuz
- Thread is marked as Resolved.
-
-
Can is problem whit smargo cardreader? Maybe is too slow?
-
Smargo should not be that slow, have you configured it in windows?
http://linuxsat-support.com/li…l-smargo-smartreader.htmlDon't go past 1.3 in update, I have read of a lot of problems with the higher firmware versions.
First can you post your configs to make sure you have not got some wait time or similar set in oscam..
post cccam.cfg, oscam.conf, oscam.server & oscam.user with usernames dns & ip info removed
-
hi guys, my server running whit ubuntu auto oscam/cccam :Tutorial - Ubuntu amd.64-Bit 12.04 - Automated Oscam/CCcam 2.1.3 Install Package
thanks for thatfellow and ten bellow
is work whit smargo reader and prob is:
very big ping 0.426ms but when client connnect to my server [whit Nline] frome non UK, any different country [germany,france......]
ping is come higher about frome 0423ms~1.200ms and is start glich and freez for him
how is possible make ping about 0.200msThe same problem, and to me THANKS - mckee25
, TIGRIUZ,thatfellow....!!!!!![account]
user = xxxxxx
pwd = xxxxx
group = 1
au = 1
caid = 093E
ident = 093E:000000
cccignorereshare = 0
keepalive = 1[reader]
label = via....
protocol = mouse
device = /dev/ttyUSB0
caid = 093E
boxid = xxxxxx
detect = cd
mhz = 500
cardmhz = 357
ident = 093E:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1[global]
usrfile = /emu/log/oscamuser.log
logfile = /var/log/oscam.log
disableuserfile = 0
nice = -1
maxlogsize = 200
preferlocalcards = 1
dropdups = 1
cacheexenablestats = 1
lb_mode = 1
lb_savepath =
lb_reopen_mode = 1
lb_auto_betatunnel = 0[monitor]
port = 988
aulow = 120
hideclient_to = 10
monlevel = 0
appendchaninfo = 0[newcamd]
port = xxxxxx@093E:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1[webif]
httpport = xxxxx
httpuser = xxxxx
httppwd = xxxxx
httprefresh = 10log.... this is not this same ip adres, there is diferent ip adres in log.... start frezing when 1500ms in costumers.
by via.... (1580ms)
by via.... (cache) (1669ms)
by via.... (cache) (2211ms)
by via.... (463ms) -
-
Smargo should not be that slow, have you configured it in windows?
http://linuxsat-support.com/li…l-smargo-smartreader.htmlDon't go past 1.3 in update, I have read of a lot of problems with the higher firmware versions.
First can you post your configs to make sure you have not got some wait time or similar set in oscam..
post cccam.cfg, oscam.conf, oscam.server & oscam.user with usernames dns & ip info removed
hi thatfellow, and mckee25.
no i'm not done yet configured in windows, just get reader and stick in ubuntu server.
config is the same like post marius1234.
i will now start play whit Tutorial for Smargo Smartreader. Thanks guys for big info, i will see what is happen after that.
just no idea what is linux distro and kernel 2.6.12 or newer version and how check that , try too find any tuttoreals.done update and version 1.3 but reader stop work:
root@ubuntu:~# ./srp_tools_x86
COM_ERROR (/dev/ttyUSB0)
root@ubuntu:~#everithink was good till :
Then new command: ./srp_update_x86 -f
start flashing
################################################## ######## done
Please remove and reinsert SmartReader+even not find windows him
is can be fake reader, now is dead -
i have this info idont now are this is true????( i have all ready 1.3 sowtware in my usb smart smargo card reader )
I'm doing lyke that but mesage told my
successfully flashed the reader with new firmware......... i doing step (4)but as I want to change remains ...mhz.. the same anyway
Linux PC setup
This is how I did it!
1: Update your smartreader+ if it has v1.2 or older firmware with v1.3 in your normal PC before puting into Linux server and set it to Autoswitch and select Normal to set it to work in Linux Server.
2: In Your Linux Server.
Copy these drivers to linux PC server. FTP 2 files:
srp_tools_x86
srp_update_x86
Set on console to both file chmod 755 !Read before step 3!
(Do not update in linux PC if your smartreader+ version is already v1.3, if not it will kill your smartreader+. Best is to update in you normal PC to play safe. If its already updated than goto step 4 to install drivers for smartreader+)
3: Run command: ./srp_update_x86
and you see like so:
smartreader+ version v1.0, v1.1 or v1.2 then you have time to update.4:Remove the reader and reinsert now we start the config tool
Run command: ./srp_tools_x86
smartreader+ version v1.3
MODE autoswitch
FREQ 3.69 Mhz
KERNEL normal
T_MODE t = 0
EGT 0successfully flashed the reader with new firmware.
works but not to long.....fake!!!!!!!!!!
I was looking at all the readers SMARGO+ on the internet which cost up to £ 20 a klone,thets wy kant to updeiting normal....
-
no help this...
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!