Need some help please

There are 5 replies in this Thread which was already clicked 918 times. The last Post () by pheonix.

    Alright chaps
    this is what I need help with
    solo 2 set up as server for internal share which is working
    now what I need to know is how do get to see clients etc and entitlements this what I get from web info this status window then configuration and so on
    I am new to this so

    OSCAM 1.20-unstable_svn build r8891on VU+ Solo2


    STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN



    Show idle clients Hide idle clients Show hidden clients



    hide
    Thread ID
    Type
    ID
    Label
    AU
    Crypted
    Address
    Port
    Protocol
    Login
    Online
    CAID:SRVID
    Current Channel
    LB Value/ Reader
    Idle
    Status
    Hide 0x50adf0 s 0 root 127.0.0.1 0 server 01.01.70 01:01:37 00:00:29 0000:0000 00:00:29 OK
    Hide 0x513e08 h 1 root 127.0.0.1 0 http 01.01.70 01:01:37 00:00:29 0000:0000 00:00:09 OK
    Readers 0/1
    Hide Restart r 1 ***uk ACTIVE OFF 127.0.0.1 0 internal 0000:0000 no data 00:00:29 UNKNOWN (no entitlements)



    1970/01/01 01:00:36 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8891 (mipsel-unknown-linux-gnu)
    1970/01/01 01:00:36 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 887
    1970/01/01 01:00:36 0 s The current system time is smaller than the build date (Sep 1 2013). Waiting up to 60 seconds for time to correct
    1970/01/01 01:01:37 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
    1970/01/01 01:01:37 0 s userdb reloaded: 1 accounts loaded, 0 expired, 1 disabled
    1970/01/01 01:01:37 0 s signal handling initialized
    1970/01/01 01:01:37 0 s newcamd: initialized (fd=7, port=10001)
    1970/01/01 01:01:37 0 s -> CAID: 0963 PROVID: 000000
    1970/01/01 01:01:37 0 s ***uk [internal] creating thread for device /dev/sci0
    1970/01/01 01:01:37 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    1970/01/01 01:01:37 0 s waiting for local card init
    1970/01/01 01:01:37 515AD8 r ***uk [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
    1970/01/01 01:01:37 515AD8 r ***uk [internal] Cannot open device: /dev/sci0
    1970/01/01 01:01:37 513E08 h webif: decompressed 53474 bytes back into 153576 bytes
    1970/01/01 01:01:37 513E08 h HTTP Server running. ip=0.0.0.0 port=******


    OSCAM.Config

    [global]
    logfile = /var/log/oscam.log
    nice = -1
    preferlocalcards = 1


    [newcamd]
    port = 10001@0963:000000
    key = 0102030405060708091011121314
    keepalive = 1


    [webif]
    httpport = 16002
    httpuser = admin
    httppwd = linuxsat
    httpcss = /var/tuxbox/config/skin-colorbutton.css
    httprefresh = 15
    httpallowed = 127.0.0.1,192.168.0.0-255.255.255.255


    OSCAM .SER


    [reader]
    label = ***uk
    protocol = internal
    device = /dev/sci0
    vu_reader_patch = 1
    caid = 0963
    detect = cd
    mhz = 357
    cardmhz = 357
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-s = 1
    blockemm-g = 1
    saveemm-u = 1


    OSCAM.USER
    [account]
    disabled = 1
    user = linuxsat
    pwd = support
    caid = 0963
    au = ***uk
    group = 1


    Cheers guys hope it makes sense

    if you are using Oscam/CCcam -the you are most probably only using Oscam as the reader for your card, and you will not see clients. These will all be visible in your CCcam webinterface/CSstudio. If you are using Oscam alone (which your configs suggest you don't) then you would need to add your peers (virtual cards) in oscam.server, and to share your services you need to ideally enable cccam protocol, forward the port to your server on your router, and set up your users in oscam.user - which we will touch on if you confirm you are not using oscam/cccam.

    If I take a while to respond, you can see why.....


    :red:

    this usually happens as cccam starts before oscam. when you power cycle your box you have to restart oscam by the blue button to get it to start before cccam. there does not seem to be a way to delay the starting of cccam

    Quote from anniman

    this usually happens as cccam starts before oscam. when you power cycle your box you have to restart oscam by the blue button to get it to start before cccam. there does not seem to be a way to delay the starting of cccam


    I presume your talking about the softcam manager on VIX ?.


    If so its coded so that cams start in the se order you initially started them.


    For example disable all cams.
    Now enable Oscam then CCcam, from now on this will be the order by which your cams now start when the image reboots, also the softcam manager has a five second delay built in so it will wait five seconds between activating the first and second cam. ( I think its five seconds ).


    Sent from my GT-I9300 using Tapatalk 2

    OpenViX on Twitter @0penViX

  • master G

    Set the Label from UK OSCam to Videoguard2 Cards OSCam

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login