Hi all
I'm trying to setup TVHeadend to access Oscam, which in turn accesses CCcam with it's known capabilities to read k*ys from a file.
for some reason though, the known good k*ys don't work, so I'm assuming a config issue.
I always get a "No Descrambler" in tvheadend.
I am not sure about the CAID and "provider" parameters in the services and user section of oscam.
I found some predefined lists for sat and other cable providers, but none for u__pc s_witzerland
In the OSCAM 1.20-unstable_svn build r8883 webinterface I see cccam as status "CONNECTED(5 of 5 cards)" as a Proxy.
Also the tvheadend client is connected with status "OK"
Hide Restart p 1 Reader-0 ON ON 127.0.0.1 12001 cccam (2.1.2-3094) 09.10.13 00:16:15 00:08:58 0000:0000 no data 00:08:58 CONNECTED (5 of 5 cards)
Clients 1/1 (0 with ECM within last 15 seconds)
Hide Kill c 2 tvheadend ON ON 127.0.0.1 44302 newcamd (Tvheadend) 09.10.13 00:16:17 00:08:56 0000:0000 00:08:56 OK
any help would be greatly appreciated!
Cheers,
- MF
oscam log
Code
2013/10/09 00:16:15 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8883 (x86_64-openelec-linux-gnu)
2013/10/09 00:16:15 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3196
2013/10/09 00:16:15 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2013/10/09 00:16:15 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/10/09 00:16:15 0 s signal handling initialized
2013/10/09 00:16:15 0 s monitor: initialized (fd=6, port=988)
2013/10/09 00:16:15 0 s newcamd: initialized (fd=7, port=15050)
2013/10/09 00:16:15 0 s -> CAID: 0604 PROVID: 000000
2013/10/09 00:16:15 0 s Reader-0 [cccam] creating thread for device 127.0.0.1
2013/10/09 00:16:15 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/10/09 00:16:15 0 s waiting for local card init
2013/10/09 00:16:15 1E851E0 p 127.0.0.1: resolved ip=127.0.0.1
2013/10/09 00:16:15 1E851E0 p Reader-0 [cccam] connecting to 127.0.0.1:12001
2013/10/09 00:16:15 2C0008C0 h webif: decompressed 53474 bytes back into 153576 bytes
2013/10/09 00:16:15 2C0008C0 h HTTP Server running. ip=0.0.0.0 port=8888
2013/10/09 00:16:15 1E851E0 p Reader-0 [cccam] proxy initialized, server 127.0.0.1:12001
2013/10/09 00:16:16 0 s init for all local cards done
2013/10/09 00:16:16 0 s anti cascading log initialized
2013/10/09 00:16:16 1E872E0 c plain dvbapi-client granted (anonymous, au=off)
2013/10/09 00:16:16 1E872E0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 11
2013/10/09 00:16:17 1E8B7B0 c client connected to 15050 port
2013/10/09 00:16:18 1E8B7B0 c encrypted newcamd:15050-client 127.0.0.1 granted (tvheadend, au=auto (1 reader))
2013/10/09 00:16:18 1E8B7B0 c user tvheadend authenticated successfully (Tvheadend)
2013/10/09 00:16:18 1E8B7B0 c AU disabled for user tvheadend
tvheadend cwc (code word client) connection log:
Code
Oct 09 00:29:44.000 cwc: Attemping to connect to 127.0.0.1:15050
Oct 09 00:29:44.000 cwc: Connected to 127.0.0.1:15050
Oct 09 00:29:44.007 cwc: 127.0.0.1:15050: Connected as user 0x0c to a I*****-card [0x0604 : 00.00.00.00.00.00.00.00] with 1 providers
Oct 09 00:29:44.007 cwc: 127.0.0.1:15050: i***** card
Oct 09 00:29:44.007 cwc: 127.0.0.1:15050: Provider ID #1: 0x000000 00.00.00.00.00.00.00.00
Oct 09 00:29:44.007 cwc: 127.0.0.1:15050: Will not forward EMMs (not allowed by server)oscam.conf
Code
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8883
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
logfile = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/oscam.log
nice = -1
usrfile = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/oscamuser.log
cwlogdir = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/cw
[anticasc]
enabled = 1
numusers = 1
samples = 5
penalty = 1
aclogfile = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/aclog.log
denysamples = 4
[newcamd]
port = 15050@0604:000000
key = 0102030405060708091011121314
keepalive = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
user = dvbapi
boxtype = pc
[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 15
[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httpallowed = 0.0.0.0-255.255.255.255
aulow = 120
hideclient_to = 15oscam.user
Code
# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8883
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.user.txt
[account]
user = tvheadend
pwd = tvheadend
description = tvheadend
monlevel = 4
au = 1
emmreassembly = 1
group = 1
services = asd,upc
ident = 0000:000000
cccreshare = 1
oscam.server
Code
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8883
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt
[reader]
label = Reader-0
description = cccam-2.1.2
protocol = cccam
device = 127.0.0.1,12001
user = user1
password = pass1
inactivitytimeout = 30
group = 1
cccversion = 2.1.2
cccmaxhops = 2
cccwantemu = 1
ccckeepalive = 1
cccreshare = 1
oscam.services
Code
# oscam.services generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8883
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.services.txt
[asd]
caid = 1801
provid = 001801
srvid = 1801
[upc]
caid = 1801
provid = 000000
srvid = 1801CCcam.cfg
Code
F: user1 pass1 yes
SERVER LISTEN PORT : 12001
