Not sure what the problem is

There are 16 replies in this Thread which was already clicked 3,278 times. The last Post () by hopper.

  • Hi


    Hope some one can help with this
    I am running CSP on server and everything connects fine.


    my problem is if a change to a channel after about 3 or 4 minutes if freezes for about 6 seconds and then continues, it might go for another 10 maybe 20 minutes before it happens again
    I have been watching the line in CSP and the ECM's are around 65 to 125
    The only other thing I see is it changes quite a lot from F, 2FC, R and so on
    Not sure about these things
    Is there some kind of testing I could do to see what is causing this

  • Hi


    Is this the place were I decrease the setting ?


    <profile name="uk" ca-id="0963" network-id="0002" provider-idents="00 00 00" enabled="true" debug="false">
    <newcamd listen-port="******">
    <card-data type="config" ca-id="0963">
    <providers>00 00 00</providers>
    <max-cw-wait>220ms</max-cw-wait>
    </card-data>


    If so then what should I set it to


    Thanks

  • I have left it run over the weekend
    I have noticed maybe 3 times while watching a film it freezes for 6 seconds
    This is random as it does not happen all the time and can happen on different channels


    At this point I'm not sure what to do


    I did connect directly to OSCAM and all worked fine but once I changed back to CSP it started happening again


    Anyone here can help


    Thanks

    • Official Post

    hopper, try this setting and lmk how u get on :)



    <cache-handler class="com.bowman.cardserv.ClusteredCache">
    <cache-config>
    <cw-max-age>19</cw-max-age>
    <max-cache-wait>10%</max-cache-wait> #was 40%
    <local-port>54277</local-port>
    <sync-period>0</sync-period>
    <cw-validation checksum="true" zero-counting="true" log-warnings="false" require-id="true"/>
    </cache-config>
    </cache-handler>

  • This is what I have setup so I will change to your settings and try
    BTW the sync period I dont have
    And also you are using % can I just change to that


    <cache-config>
    <cw-max-age>900ms</cw-max-age>
    <max-cache-wait>250ms</max-cache-wait>
    <local-host>**********.***</local-host> using my server ip
    <local-port>54277</local-port>
    <tracker-url>file:///usr/local/csp/cache/cluster</tracker-url>
    <tracker-update>1</tracker-update>
    <sync-period>35ms</sync-period>
    <hide-names>true</hide-names>
    <debug>false</debug>
    </cache-config>
    </cache-handler>
    </cardserv-proxy>

  • Hi


    Have made these changes
    Is this still normal


    2013-10-21 13:05:32 - NewcamdCws[uk12:uk]: Lost service - *** Sports 3 HD uk:ef0
    2013-10-21 13:03:04 - NewcamdCws[uk11:uk]: Found service - *** Sports 1 HD uk:f25
    2013-10-21 13:01:43 - NewcamdCws[uk1:uk]: Lost service - Nick Jr Peppa uk:c791
    2013-10-21 13:00:04 - NewcamdCws[uk11:uk]: Found service - *** Sports 3 HD uk:ef0
    2013-10-21 12:58:00 - NewcamdCws[uk11:uk]: Lost service - *** Sports 1 HD uk:f25
    2013-10-21 12:56:04 - NewcamdCws[uk13:uk]: Lost service - *** Sports 3 HD uk:ef0
    2013-10-21 12:56:04 - NewcamdCws[uk11:uk]: Found service - *** Sports 2 Ireland uk:1070
    2013-10-21 12:55:05 - NewcamdCws[uk1:uk]: Found service - E! Entertainment TV uk:cfd0
    2013-10-21 12:54:52 - NewcamdCws[uk11:uk]: Lost service - *** Sports 3 HD uk:ef0
    2013-10-21 12:50:20 - NewcamdCws[uk11:uk]: Lost service - *** Sports 2 Ireland uk:1070
    2013-10-21 12:49:53 - NewcamdCws[uk1:uk]: Lost service - E! Entertainment TV uk:cfd0
    2013-10-21 12:49:08 - NewcamdCws[uk11:uk]: Found service - *** Sports 2 Ireland uk:1070




    2013-10-21 13:06:54 - WARNING: ClusteredCache - Bad id in request, dropping: D08A765A DCW (0x80) [] (unknown) - profile: null 0000-0500
    2013-10-21 13:06:54 - WARNING: ClusteredCache - Bad id in request, dropping: 2D3399EB DCW (0x81) [] (unknown) - profile: null 0000-09cd
    2013-10-21 13:06:53 - WARNING: ClusteredCache - Bad id in request, dropping: 8B97FEE3 DCW (0x80) [] (unknown) - profile: null 0000-093e
    2013-10-21 13:06:52 - WARNING: ClusteredCache - Bad id in request, dropping: 203647FB DCW (0x80) [] (unknown) - profile: null 0000-1802
    2013-10-21 13:06:52 - WARNING: NewcamdCws[jsc1:0500-013e] - Ca-id of remote card is 0000, disconnecting and awaiting retry...
    2013-10-21 13:06:52 - WARNING: ServiceMapper[uk] - Service [1070/*** Sports 2 Ireland] failed to decode on CWS: uk11 (two consecutive failures removes mapping). Ecm source was: jbox50 (NewcamdSession[40769:uk]) [prev: 2FR]
    2013-10-21 13:06:50 - WARNING: ClusteredCache - Bad id in request, dropping: 66C3B7C4 DCW (0x81) [] (unknown) - profile: null 0000-1810
    2013-10-21 13:06:48 - WARNING: ClusteredCache - Bad id in request, dropping: 3433CEE9 DCW (0x81) [] (unknown) - profile: null 0000-0500
    2013-10-21 13:06:47 - WARNING: ClusteredCache - Bad id in request, dropping: 66C3B7C4 DCW (0x81) [] (unknown) - profile: null 0000-1810
    2013-10-21 13:06:47 - WARNING: ClusteredCache - Bad id in request, dropping: A06D559C DCW (0x80) [] (unknown) - profile: null 0000-0b00
    2013-10-21 13:06:47 - WARNING: ClusteredCache - Bad id in request, dropping: A06D559C DCW (0x80) [] (unknown) - profile: null 0000-0b00
    2013-10-21 13:06:46 - WARNING: ClusteredCache - Bad id in request, dropping: A3B50356 DCW (0x80) [] (unknown) - profile: null 0000-0b00

  • Hi


    After running for over a week
    everything was going fine but now it seems to be freezing again but not on all channels
    It only happens every now and this
    freezes for about 6 seconds
    Sometimes in the events I see lost channel other time nothing this to match up with the freeze


    Any ideas
    Thanks

  • There is currently a problem with rte 2 sd http://linuxsat-support.com/showthread.php?p=146851



    Q2FR means this, the ecm was requested and aborted as it was not in local cache, (Q)
    ecm was looked for in other local cards (2)
    after probing for your local cards the ecm request was forwarded to your local card (F)
    then the ecm was found from a remote cache peer (R)



    You might want to reduce your max-cache-wait by 20ms at a time and see how it works for you.
    Sometimes setting a % can be erratic, try 200ms

Other Not Listed Softcam Support Forum

Configs, discussion, downloads and guides for Other Not Listed Softcams - CSP, DreamOS, GBox, NEWCamd, MultiCS, OSCam Smod, OSCam Ymod, SUpcam & Wicardd.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!