S*y It card conf... need ur help guys

Hello All;

I got today my new S*y It card (I believe its 09CD) and its activated & working fine on original box.

I am planning to use the card on my DM800 HD but I need to verify the following:

1- Could I use DM800 internal reader or Or I have to use external reader ?

2- Could any one post here the idle complete configuration for the card (Oscam Server & Oscam conf ?

Note: my main concern is not allow the card to burn in the reader.

====================================

Here is my current config idea on (DM800 Internal reader), using oscam-svn5013-light-Distribution

=== OSCAM CONF ===============

[global]

nice = -1

WaitForCards = 1

logfile = /var/log/oscam.log

preferlocalcards = 1

saveinithistory = 1

[webif]

httpport = 8080

httpuser = test

httppwd = test

httprefresh = 5

httpallowed = 192.168.1.7

# protocols

[newcamd]

key = 0102030405060708091011121314

port = 12001@09CD:000000

==== OSCAM SERVER ======

[reader]

label = S*Y_ITALIA

protocol = internal

device = /dev/sci0

BOXKEY: /dev/sci0 12 7B 60 16

blockemm-u = 0

blockemm-s = 0

blockemm-g = 1

blockemm-unknown = 1

#mhz = 357 # I am not sure about this no

#cardmhz = 357 # I am not sure about this no

emmcache = 1,3,2

group = 1

caid = 09CD

========= OSCAM USER ===========

[account]

user = user1
pwd = user1pwd
monlevel = 0

uniq = 0

group = 1,2

au = 0

caid = 9CD

Thanks In Advance
Thanks In Advance

Thx cdr & MasterG...

Ok I got it DM800 internal reader burn the card in less than i minute ;
what is ur recommendation ;
1- can i use (DM 500+) internal reader with masterG configuration.
2- Use external reader on DM 800 (Smagro) with masterG configuration , do i need to add cardMhz (frequency) or keep it as masterG configuration.

Quote from cdr

remember this master G files they are just the config for oscam CCcam...you need as well the oscam and Cccam files LOL

LOL , I am already using oscam-svn5013-light-Distribution + Cccam 2.1.3.

Quote from master G

There is a CCcam.cfg with a working n line in that file.

thx master G , our friend talking about oscam - cccam nline trick - so the card appear as local...

I got on hand Smartmouse ?Mouse-Funprog

Could it be used on Dm 800 oscam; any driver need to b installed.

Hi ;

I am know using Ubuntu server (Vmware image) with Smargo reader + ; Oscam installed , Smargo configured but got the following:

Oscam.log
----------------------------------------------------------------
>> OSCam << cardserver started at Tue Apr 26 15:20:36 2011
-------------------------------------------------------------------------------
2011/04/26 15:20:36 XXXXXX2 s >> OSCam << cardserver started version 1.00-unstable_svn, build #5080 (i686-pc-linux)
2011/04/26 15:20:36 XXXXXX2 s version=1.00-unstable_svn, build #5080, system=i686-pc-linux, nice=-1
2011/04/26 15:20:36 XXXXXX2 s client max. idle=120 sec, debug level=0
2011/04/26 15:20:36 XXXXXX2 s max. logsize=unlimited, loghistorysize=4096 bytes
2011/04/26 15:20:36 XXXXXX2 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/04/26 15:20:36 XXXXXX2 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
2011/04/26 15:20:36 XXXXXX2 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/26 15:20:36 XXXXXX2 s signal handling initialized (type=sysv)
2011/04/26 15:20:36 XXXXXX2 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/04/26 15:20:36 XXXXXX2 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/04/26 15:20:36 XXXXXX2 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/04/26 15:20:36 XXXXXX2 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/04/26 15:20:36 XXXXXX2 s monitor: initialized (fd=7, port=988)
2011/04/26 15:20:36 XXXXXX2 s camd33: disabled
2011/04/26 15:20:36 XXXXXX2 s camd35: disabled
2011/04/26 15:20:36 XXXXXX2 s cs378x: disabled
2011/04/26 15:20:36 XXXXXX2 s newcamd: initialized (fd=8, port=34001, crypted)
2011/04/26 15:20:36 XXXXXX2 s CAID: 09CD
2011/04/26 15:20:36 XXXXXX2 s provid #0: 000000
2011/04/26 15:20:36 XXXXXX2 s radegast: disabled
2011/04/26 15:20:36 XXXXXX2 s http disabled
2011/04/26 15:20:36 XXXXXX2 s creating thread for device 002:007
2011/04/26 15:20:36 XXXXXX2 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/26 15:20:36 XXXXXX2 s waiting for local card init
2011/04/26 15:20:36 XXXXXX1 r reader thread started (thread=XXXXXX1, label=***it, device=002:007, detect=cd, mhz=400, cardmhz=357)
2011/04/26 15:20:36 XXXXXX1 r Using 0x82 as endpoint for smartreader hardware detection
2011/04/26 15:20:36 XXXXXX1 r Found smartreader device 002:007
2011/04/26 15:20:37 XXXXXX1 r ***it card detected
2011/04/26 15:20:42 XXXXXX1 r Error activating card.
2011/04/26 15:20:48 XXXXXX1 r Error activating card.
2011/04/26 15:20:55 XXXXXX1 r Error activating card.
2011/04/26 15:20:55 XXXXXX1 r card initializing error
2011/04/26 15:20:56 XXXXXX2 s init for all local cards done
2011/04/26 15:20:56 XXXXXX2 s anti cascading disabled
2011/04/26 15:20:56 XXXXXX3 c client connected to 34001 port
2011/04/26 15:20:56 XXXXXX4 c client connected to 34001 port
2011/04/26 15:20:56 XXXXXX4 c Connection closed to client
2011/04/26 15:20:56 XXXXXX4 c thread XXXXXX4 ended!
2011/04/26 15:20:56 XXXXXX3 c encrypted newcamd:34001-client 192.168.0.35 granted (user1, au=on (1 reader))
2011/04/26 15:20:56 XXXXXX3 c user user1 authenticated successfully (CCcam)
2011/04/26 15:20:56 XXXXXX3 c AU disabled for user user1
2011/04/26 15:21:04 XXXXXX3 c user1 (09CD&000000/2BCF/B7:3F35): rejected user ident (0 ms) (of 0 avail 0) (no card support 09CD:000000)
2011/04/26 15:21:14 XXXXXX3 c user1 (09CD&000000/2BCF/B7:92E3): rejected user ident (0 ms) (of 0 avail 0) (no card support 09CD:000000)
2011/04/26 15:21:24 XXXXXX3 c user1 (09CD&000000/2BCF/B7:7A09): rejected user ident (0 ms) (of 0 avail 0) (no card support 09CD:000000)
2011/04/26 15:21:34 XXXXXX3 c user1 (09CD&000000/2BCF/B7:B755): rejected user ident (0 ms) (of 0 avail 0) (no card support 09CD:000000)
2011/04/26 15:21:44 XXXXXX3 c user1 (09CD&000000/2BCF/B7:7551): rejected user ident (0 ms) (of 0 avail 0) (no card support 09CD:000000)
2011/04/26 15:21:54 XXXXXX3 c user1 (09CD&000000/2BCF/B7:3CC3): rejected user ident (0 ms) (of 0 avail 0) (no card support 09CD:000000)
2011/04/26 15:22:04 XXXXXX3 c user1 (09CD&000000/2BCF/B7:7E8D): rejected user ident (0 ms) (of 0 avail 0) (no card support 09CD:000000)
2011/04/26 15:22:14 XXXXXX3 c user1 (09CD&000000/2BCF/B7:1EDB): rejected user ident (0 ms) (of 0 avail 0) (no card support 09CD:000000)

-------------------------------------------------
[reader]
Label = s*yit
Protocol = smartreader
Detect = CD
Device = 002:007
emmcache = 1,3,2
BoxID = xxxxxxxx
Group = 1
CAID = 09cd
indent = 09cd:000000
mhz = 400
cardmhz = 357
blockemm-u = 0
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
cccversion = 1.2.34
--------------------------------
[global]

nice = -1

WaitForCards = 1

[monitor]

port = 988

aulow = 120

[newcamd]

key = 0102030405060708091011121314

port = 34001@09cd:000000
-----------------------------------
[account]

user = user1
pwd = pwd1
monlevel = 1
group = 1
uniq = 1
au = ***it
caid = 09cd
indent = 09cd:000000

Thanks M8
1- When I rum Smartreader.exe it shows the following on status bar:
Connect smartreader without car
and its on: Mode :autoswitch -,Kernel:Normal , T-mode=T=0 and EGT=0
then I click apply - after clicking apply the Connect smartreader without car disapper
2-When I run SmartreaderUpdate.exe & click update its show me :
Smartreader found on COM2
Reader Version 1.5 Prgram version 1.3
but the update status bar not moving from 0%.

I tried removing mhz and cardmhz from oscam.server but no luck, also i tried plug the smargo throught Powered USB HUB but not luck same error.

Now I got the following log:
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Apr 27 03:59:00 2011
-------------------------------------------------------------------------------
2011/04/27 3:59:00 xxxxxxx2 s >> OSCam << cardserver started version 1.00-unstable_svn, build #5080 (i686-pc-linux)
2011/04/27 3:59:00 xxxxxxx2 s version=1.00-unstable_svn, build #5080, system=i686-pc-linux, nice=-1
2011/04/27 3:59:00 xxxxxxx2 s client max. idle=120 sec, debug level=0
2011/04/27 3:59:00 xxxxxxx2 s max. logsize=unlimited, loghistorysize=4096 bytes
2011/04/27 3:59:00 xxxxxxx2 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/04/27 3:59:00 xxxxxxx2 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
2011/04/27 3:59:00 xxxxxxx2 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/04/27 3:59:00 xxxxxxx2 s signal handling initialized (type=sysv)
2011/04/27 3:59:00 xxxxxxx2 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/04/27 3:59:00 xxxxxxx2 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/04/27 3:59:00 xxxxxxx2 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/04/27 3:59:00 xxxxxxx2 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/04/27 3:59:00 xxxxxxx2 s monitor: initialized (fd=7, port=988)
2011/04/27 3:59:00 xxxxxxx2 s camd33: disabled
2011/04/27 3:59:00 xxxxxxx2 s camd35: disabled
2011/04/27 3:59:00 xxxxxxx2 s cs378x: disabled
2011/04/27 3:59:00 xxxxxxx2 s newcamd: initialized (fd=8, port=34001, crypted)
2011/04/27 3:59:00 xxxxxxx2 s CAID: 09CD
2011/04/27 3:59:00 xxxxxxx2 s provid #0: 000000
2011/04/27 3:59:00 xxxxxxx2 s radegast: disabled
2011/04/27 3:59:00 xxxxxxx2 s http disabled
2011/04/27 3:59:00 xxxxxxx2 s creating thread for device 002:008
2011/04/27 3:59:00 xxxxxxx2 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/27 3:59:00 xxxxxxx2 s waiting for local card init
2011/04/27 3:59:00 xxxxxxx1r reader thread started (thread=xxx42B70, label=***it, device=002:008, detect=cd, mhz=400, cardmhz=357)
2011/04/27 3:59:00 xxxxxxx1r Using 0x82 as endpoint for smartreader hardware detection
2011/04/27 3:59:00 xxxxxxx1r Found smartreader device 002:008
2011/04/27 3:59:00 xxxxxxx1r ***it card detected
2011/04/27 3:59:03 xxxxxxx1r ATR: 3F FD 13 25 02 50 80 0F 33 B0 13 69 FF 4A 50 D0 80 00 49 54 03
2011/04/27 3:59:04 xxxxxxx1r Maximum frequency for this card is formally 5 Mhz, clocking it to 4.00 Mhz
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] parental lock setting: BF FF FF FF
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] type: VideoGuard *** Italia (093B), caid: 093B
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] serial: 123456789, BoxID: 19999999, baseyear: 1997
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] ready for requests
2011/04/27 3:59:06 xxxxxxx1r found cardsystem videoguard2
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] ***it card detected
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] type: VideoGuard *** Italia (093B)
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] tier: 000b, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] tier: 021a, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] tier: 021b, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] tier: 0222, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] tier: 0226, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] tier: 0228, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] tier: 022e, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:06 xxxxxxx1r [videoguard2-reader] tier: 026b, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:07 xxxxxxx1r [videoguard2-reader] tier: 0295, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:07 xxxxxxx1r [videoguard2-reader] tier: 029a, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:07 xxxxxxx1r [videoguard2-reader] tier: 029b, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:07 xxxxxxx1r [videoguard2-reader] tier: 029d, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:07 xxxxxxx1r [videoguard2-reader] tier: 029e, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:07 xxxxxxx1r [videoguard2-reader] tier: 02f3, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:07 xxxxxxx1r [videoguard2-reader] tier: 02fe, expiry date: 2011/06/08-00:00:00
2011/04/27 3:59:08 xxxxxxx2 s init for all local cards done
2011/04/27 3:59:08 xxxxxxx2 s anti cascading disabled
2011/04/27 3:59:08 xxxxxxx3 c client connected to 34001 port
2011/04/27 3:59:08 xxxxxxx3 c Connection closed to client
2011/04/27 3:59:08 xxxxxxx3 c thread xxxxxxx3 ended!
2011/04/27 3:59:16 xxxxxxx3 c client connected to 34001 port
2011/04/27 3:59:16 xxxxxxx3 c encrypted newcamd:34001-client 192.168.0.35 granted (user1, au=on (1 reader))
2011/04/27 3:59:16 xxxxxxx3 c user user1authenticated successfully (CCcam)
2011/04/27 3:59:16 xxxxxxx3 c AU disabled for user user1
2011/04/27 3:59:18 xxxxxxx1r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/04/27 3:59:18 xxxxxxx3 c user1(09CD&000000/2AA8/B7:D7CE): not found (252 ms) by ***it (of 1 avail 1)
2011/04/27 3:59:28 xxxxxxx1r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/04/27 3:59:28 xxxxxxx3 c user1(09CD&000000/2AA8/B7:DBA0): not found (244 ms) by ***it (of 1 avail 1)
2011/04/27 3:59:38 xxxxxxx1r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/04/27 3:59:38 xxxxxxx3 c user1(09CD&000000/2AA8/B7:486D): not found (246 ms) by ***it (of 1 avail 1)
2011/04/27 3:59:48 xxxxxxx1r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/04/27 3:59:48 xxxxxxx3 c user1(09CD&000000/2AA8/B7:97A2): not found (245 ms) by ***it (of 1 avail 1)

Yahoooooooooooooooooooooo.... Its working Now .. the problem was ... the CAID = 093b not 09cd

Thanks you all