gemini 4.70 oscam and cccam 2.13 not reading card?

There are 10 replies in this Thread which was already clicked 1,777 times. The last Post () by slavi.

    Hi i flashed a few times the image provided, but the card isnt clearing channels


    2013/11/20 22:30:03 300162B0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/11/20 22:30:03 300162B0 s waiting for local card init
    2013/11/20 22:30:03 31025B50 h HTTP Server listening on port 8888
    2013/11/20 22:30:03 31825B50 r reader thread started (thread=31825B50, label=cardslot, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
    2013/11/20 22:30:03 31825B50 r cardslot card detected
    2013/11/20 22:30:03 31825B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
    2013/11/20 22:30:04 31825B50 r ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
    2013/11/20 22:30:05 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
    2013/11/20 22:30:06 31825B50 r [videoguard2-reader] parental lock setting: 3F 00 0E 00
    2013/11/20 22:30:06 31825B50 r [videoguard2-reader] type: VideoGuard B***B (0963), caid: 0963
    2013/11/20 22:30:06 31825B50 r [videoguard2-reader] serial: XXXXXXXXX, BoxID:XXXXXXX, baseyear: 1997
    2013/11/20 22:30:06 31825B50 r [videoguard2-reader] ready for requests
    2013/11/20 22:30:06 31825B50 r found cardsystem videoguard2
    2013/11/20 22:30:06 31825B50 r [videoguard2-reader] cardslot card detected
    2013/11/20 22:30:06 31825B50 r [videoguard2-reader] type: VideoGuard B***B (0963)
    2013/11/20 22:30:09 300162B0 s init for all local cards done
    2013/11/20 22:30:09 300162B0 s anti cascading disabled
    2013/11/20 22:30:14 32025B50 c client connected to xxxxx port
    2013/11/20 22:30:14 32025B50 c encrypted newcamd:xxxxx-client 127.0.0.1 granted (test1, au=on (1 reader))
    2013/11/20 22:30:14 32025B50 c user test1 authenticated successfully (CCcam)
    2013/11/20 22:30:14 32025B50 c AU enabled for user test1 on reader cardslot


    Does it seem ok?


    I go to cccam entitlement info but see nothing

    Edited once, last by master G: Removing serial & BoxID ().

    Yes it's ok, oscam is reading the card so it won't show in CCcam info
    You need to access the oscam web page


    ip of box:8888
    user - admin
    pass - admin


    or go back to the thread you downloaded the image from and check for correct passwords if they don't work

    no havent added boxkey


    no havent had card in official box for years


    2013/11/20 22:37:24 31825B50 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/11/20 22:37:24 32025B50 c test1 (0963&000000/10CE/5F:F2B4): not found (61 ms) by cardslot (of 1 avail 1)
    2013/11/20 22:37:32 31825B50 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/11/20 22:37:32 32025B50 c test1 (0963&000000/10CE/5F:EC8D): not found (62 ms) by cardslot (of 1 avail 1)
    2013/11/20 22:37:40 31825B50 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/11/20 22:37:40 32025B50 c test1 (0963&000000/10CE/5F:C9CC): not found (62 ms) by cardslot (of 1 avail 1)
    2013/11/20 22:37:48 31825B50 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/11/20 22:37:48 32025B50 c test1 (0963&000000/10CE/5F:6DFD): not found (62 ms) by cardslot (of 1 avail 1)
    2013/11/20 22:37:56 31825B50 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/11/20 22:37:56 32025B50 c test1 (0963&000000/10CE/5F:B3E0): not found (62 ms) by cardslot (of 1 avail 1)
    2013/11/20 22:38:04 31825B50 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/11/20 22:38:04 32025B50 c test1 (0963&000000/10CE/5F:FCBC): not found (62 ms) by cardslot (of 1 avail 1)
    2013/11/20 22:38:12 31825B50 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/11/20 22:38:12 32025B50 c test1 (0963&000000/10CE/5F:C49C): not found (61 ms) by cardslot (of 1 avail 1)


    channel not subscribed even though I am paying legitimately (no payserver involved) for the channels


    Havent changed any of the configs that were on the image, just opened necessary ports

    why oscam in from powerpc-TuxBox-old
    it's only in oscam from powerpc-TuxBox to use


    waster81, give me the message if you get to upgrade oscam to the latest version.
    Have tried this myself but with pure oscam and gemini 4.70, my problem sits in the script and must start oscam in telnet!
    http://linuxsat-support.com/showthread.php?t=38869


    Sorry, thought I read that it was about a 7020, but the show is a DM500 so have me Excuse:62:

    Edited once, last by hacked ().

    • Official Post
    Quote from hacked

    why oscam in from powerpc-TuxBox-old
    it's only in oscam from powerpc-TuxBox to use


    :beat_brick: You might want to check that buddy.


    Quote from hacked


    Have tried this myself but with pure oscam and gemini 4.70, my problem sits in the script and must start oscam in telnet!


    There is no problem with the script, perhaps you are using the wrong version of oscam.
    :laugh:

    yeah have updated to a more recent version of oscam, its clearing channels now but getting really high ecm


    2013/11/21 18:52:13 1010F0E0 c test1 (0963&000000/FFFF/C4BE/68:ACC04014B27EB483AABAB59D66EFE3D1): found (898 ms) by cardslot
    2013/11/21 18:52:21 1010F0E0 c test1 (0963&000000/FFFF/C4BE/68:508DBDDA31445737209E6A4F400A69FE): found (899 ms) by cardslot
    2013/11/21 18:52:29 1010F0E0 c test1 (0963&000000/FFFF/C4BE/68:BDF6753DC67CF4C37A33A6792E22662D): found (899 ms) by cardslot
    2013/11/21 18:52:37 1010F0E0 c test1 (0963&000000/FFFF/C4BE/68:8CD7F5C5408E2737A7BF3CB4770E2A29): found (898 ms) by cardslot

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login