Hello All - Please Help With New Server Build

There are 25 replies in this Thread which was already clicked 2,927 times. The last Post () by hulk5010.

    Thanks Master G,


    I swapped file you sent and put my user in but it did look ok before hand as i changed username in CCam.cfg at the moment it is still doing the same as if the ccam user in not there but it is in the config.


    ___________________________________________________________________


    SERVER LISTEN PORT : 12000
    ALLOW TELNETINFO: yes
    ALLOW WEBINFO: yes
    WEBINFO USERNAME :admin
    WEBINFO PASSWORD :admin
    TELNETINFO USERNAME :admin
    TELNETINFO PASSWORD :admin
    TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    ZAP OSD TIME :0
    OSD USERNAME :root
    OSD PASSWORD :dreambox
    OSD PORT :80
    SHOW TIMING : yes
    DEBUG : yes
    NEWCAMD CONF : no
    #DISABLE EMM : yes
    #EXTRA EMM LEVEL : yes
    SHOW EXTENEDED CLIENT INFO : yes
    MINI OSD : no
    #MINIMUM DOWNHOPS: 1
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CAID PRIO FILE : /var/etc/CCcam.prio
    LOG WARNINGS : /var/log/warnings.txt
    SOFTKEY FILE : /var/keys/SoftCam.Key
    AUTOROLL FILE : /var/keys/AutoRoll.Key
    #STATIC CW FILE : /var/keys/constant.cw
    #BOXKEY: /dev/sci0
    #SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000


    N: 127.0.0.1 10001 ccam ccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256


    ______________________________________________________________________


    Oscam.user


    # oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8917
    # Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.user.txt


    account]
    user = ccam
    pwd = ccam
    group = 1
    au = uk
    caid = 0963
    keepalive = 1

    Server is saying its connected But Box Is just Saying Offline



    Almost There But Something not right

    • Official Post
    Quote from hulk5010

    do I give these settings to my box ?


    N: 127.0.0.1 10xxx ccam ccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 Which are the same as whats in ccam.cfg?


    No, the N line connects oscam to CCcam.. This N line must be on the server`s CCcam.cfg only..


    To setup a connection for your receivers create an F line in the server`s CCcam.cfg then add a c line to each receiver`s CCcam.cfg..


    Example on server`s CCcam.cfg;


    Code
    N: 127.0.0.1 10xxx ccam ccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
F: [COLOR='#FF0000']receiver password [/COLOR]
F: [COLOR='#00FF00']receiver1 password1[/COLOR]
F: [COLOR='#FFA500']receiver2 password2[/COLOR]


    You now have three C lines to use in each of your receivers;


    Code
    C: server.ip.address 12000 [COLOR='#FF0000']receiver password[/COLOR]
C: server.ip.address 12000 [COLOR='#00FF00']receiver1 password1[/COLOR]
C: server.ip.address 12000 [COLOR='#FFA500']receiver2 password2[/COLOR]

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management