hi,i have sbox runing good on vusolo bh 2.06
i want to try my smartgo reader
in blue boton ,kernel i have 3 option witch one is
then in sbox cfg
wats i have to change
user sbox do i have to 0 1 or 1 0
tkyou
There are 6 replies in this Thread which was already clicked 1,059 times. The last Post () by rami.
-
-
Exchange sbox config
reader=1# 0=phoenix, 1=sci (internal reader), 2=smartreader, 3=omnikey pcsc reader
-
so on reader change to 2
only thats have to change sur nothing more
-
Code
reader=[COLOR='#FF0000']2 [/COLOR] # 0> phoenix, 1> sci (internal reader), [COLOR='#FF0000']2[/COLOR]> [U]smartreader[/U], 3> omnikey pcsc readerChange the reader= to 0, 1, 2 or 3 depending on which reader you have.
Code
Display More[slot1] active=1 # 0=inactive 1=active sci=/dev/usb/tts/0 reader=[COLOR='#FF0000']2[/COLOR] ncdserver=1 # 0=newcamd server off 1=newcamd server on deskey=0102030405060708091011121314 # newcamd deskey port=50001 # newcamd port mhz=600 # Mhz for card in this reader. Example: mhz=357, mhz=368 [slot2] active=1 # 0=inactive 1=active sci=/dev/usb/tts/1 reader=[COLOR='#FF0000']2[/COLOR] ncdserver=1 # 0=newcamd server off 1=newcamd server on deskey=0102030405060708091011121314 # newcamd deskey port=50002 # newcamd port mhz=600 # Mhz for card in this reader. Example: mhz=357, mhz=368 -
do i have to go with remote control blue boton 2 times go to kermel and active smartgo remember i have vusolo bh image tkyou
-
-
ok , i save but when i press yellow for active i get differente chice do i have to active one on particular i have smargo reader thx
-
master G
Moved the thread from forum USB Smart Card Reader Support to forum Linux Server Support.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
