Sim2-DM800SE-Newnigma2 LEAN v4.0.6 SIM2 #84d Jasper (2013-11-30)
Clean, no changes.
Sim2
SSL84d
Enigma2: 2013-11-18-tarball (thx gjstroom)
################################################## #######################################
Webinterface is working.
Teletext is working.
################################################## #######################################
Deactivate Firmware Update (Newnigma2 Services/System Tools/System Settings)
################################################## #######################################
No WLAN driver included (this is a feature of Newnigma Lean image):
The following drivers are available on the online feed:
Open a Telnet session to install or use Newnigma2 Services/Softwaremanager/Online Installation/show all packages to install:
opkg install kernel-module-carl9170
opkg install kernel-module-rt2800usb
opkg install kernel-module-rt73usb
opkg install kernel-module-r8712u
opkg install kernel-module-zd1211rw
opkg install r8192c
reboot
################################################## #########################################
If you like to change the bootlogo:
create a folder /boot in the root directory
reboot
Then you will find the bootlogo-dm800se.jpg in the /boot directory.
################################################## #########################################
Download:
2013-11-30:
https://mega.co.nz/#!IMpUAIiZ!dR4NGj...m1jgxkqZaX8e9Y
Jasper
################################################## #########################################
Newnigma2 team proudly presents:
Newnigma2 v4.0.6
################################################## ###################
Basics:
- Enigma2 4.0: 18.11.2013
- Enigma2 Plugins: 29.11.2013
- Newnigma2 Plugins: 29.11.2013
- driver: 01.10.2013
- secondstage: 84
- kernel 3.2.51
- driver: 01.10.2013
- secondstage: 88
- kernel 3.2.51
Changes by DMM:
changelog E2 15.08.2013:
- fixed CEC poweroff message on enigma2 shutdown (deep standby)
- dont send CEC poweron message on automatic timer wakeup
- enigma2 will now boot into idle mode on automatic recordtimer wakeups - added virtual subservices for some HD services
- fixed background and selection pixmap rendering in config lists
- fixed possible crash on subtitle delivery when 3rd party skins don't define some mandatory values
- added "HasSubtitles" converter option to ServiceInfo skin converter
changelog E2 31.08.2013:
- added "HasSubtitles" converter option to ServiceInfo skin converter
- don't zap to last service after booting into idle mode (automatich timer wakeup)
- DVDBurn: fixed Bludisc and DVD audio track language selection
- changes for easier timer wakeup detection in plugins
- HdmiCec: dont send poweron command when a idle mode request is pending or idle mode is active
- added missing check to detect if the last automatic wakeup was a record timer wakeup
- let subservice numbers start from 1 .. because 0 is used to zap between previous two services
- fixed abortion/ending of service scan
- fixed zap to last subservice in list via button
- UPnPMediaRenderer: fixed log spam
- UPnPMediaRenderer: some picture display improvements (fixed TV-Picture showing between two pictures)
- fixed possible crash when skipping forwards/backwards with DVB subtitles enabled
- changes for cleaner shutdown
- fixed deadlock on jump forward/backward in MKV files
- added a ServiceInfo converter workaround for types based on evVideoSizeChanged
changelog E2 02.09.2013:
- virtual subservices bugfix for cable
- added legacy virtual subservices mode which can be enabled in usage config in normal case not needed (just for some broken cable providers.. but try first the normal mode)
- added possibility to receive epg data via ts streaming (not used by our soft yet)
changelog E2 07.09.2013:
- fixed crashes on e2 shutdown
- fixed crash on end of servicescan
- added a more easy way to detect recording timer wakeups
- speedup devicemanager
- fixed incorrectly set harddisc idle time on hdds detected by hotplug
- some stability improvements
changelog E2 27.09.2013:
- added ac3+ support (requires hw drivers with ac3+ support not DM8000/DM800HD)
- improved storing config files on write-back enabled filesystems (ubifs, ext2, ext3 ....)
- fixed some upnp issues (special char/umlaut issues, servers not showing up, minor fixes)
- fixed subtitle synchronization (was broken on skip fwd/bwd since mkv deadlock fix)
- fixed BlinkingLabel (thanks to Kashmir)
- fixed crash on timer-based deepstandby wakeup
- fixed shutdown on radio services with RASS
- fixed software update on dm500hd / dm800se with external update tool
(to get automatic updates again, an update via telnet/ssh shell is required once)
changelog E2 01.10.2013:
- extend pid cache for audio types other than AC3 and MPEG
(required to store last selected ac3+ or aac audio tracks) - dont send CEC poweroff on idle to standby transition again
- dont send CEC poweron on idle to standby transition
- dont restart previous service on idle to standby transition
- fixed rare crashes on e2 shutdown
- call flush and fsync when storing parental control white/blacklist
changelog E2 12.11.2013:
- added unicable support for jultec JPS0501-8
- added possibility to rename services/markers and bouquets via channelselection context menu
- small storage manager fixes
- changes to support picons for remote services (partnerbox)
- fixed possible epgcache crash
- fixed now event epg query when no next event is available
- fixed endless loop caused by wrongly encoded service names on 10E 11221V 27500
changelog E2 18.11.2013:
- fixed greenscreen on cancel press during service/marker/bouquet rename
- fixed a possible crash caused by plugins which doesn't check the return code of startTimeQuery..
- fixed possible crash on screen close
- fixed broken "ImageDefaultInstaller" (broken since 20131112 update)
- fixed possible ConfigLocations crash (typo)
Notice: Update from v4.0.x to 4.0.6 possible.
Changes:
- Added: Skin Evolution-HD by Kerni (thx)
- Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
- Added: Kerni.Gnome-HD by Kerni (thx)
- Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
IMPORTANT: read here for your collections - Added: mediaportal
- Added: swapmanager
- Added: wget
- Added: weathercomponent (needed for some skins)
- Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
- Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
- Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
- Bugfix: neutrino keymap
- Update: Some improvements on our onlineinstaller
- Update: znc to version 1.2
- Update: openvpn to version 2.3.2
- Update: german translation
- Update: mediaportal to version 4.9.2
- Removed: we have removed non working plugins. most of them are integrated in mediaportal.
- Removed: keymanger plugin from image. It's still available from our feed.
- here u can find USB to UART driver
- here u can find DreamUP V1.3.3.11
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
Wichtige Änderungen:
1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"
2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.
