2013/12/07 11:27:42 143B500 c anonymous disconnected from myip
2013/12/07 11:27:53 143F3E0 c client connected to XXXXXX port
2013/12/07 11:27:53 143F3E0 c plain newcamd-client myip rejected (invalid access)
2013/12/07 11:27:53 143F3E0 c anonymous disconnected from myip
2013/12/07 11:28:04 143B500 c client connected to XXXXXX port
2013/12/07 11:28:04 143B500 c plain newcamd-client myip rejected (invalid access)
2013/12/07 11:28:04 143B500 c anonymous disconnected from myip
OSCAM user offline what im doing wrong
-
- Nagra Cards OSCam
- vusolo
- Closed
- Thread is marked as Resolved.
-
-
Check the [newcamd] port in oscam.conf matches the N line the client is trying to connect with..
Do you have an [account] setup in oscam.user ?
Going by your previous post you are using oscam+CCcam.. Create access for clients in the CCcam.cfg..
-
Checked [newcamd] port in oscam.conf yes matches the N line port
yes i have [account] setup in oscam.useri'm losing my hair
-
In CCcam.cfg create an F line;
F: user password
Client connects with;
Server Listen Port in CCcam.cfg
-
I deleted Newcamd Config allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user online 5 sec and offline again now im getting this error2013/12/07 11:52:11 143F3E0 c AU disabled for user test1
2013/12/07 11:53:26 143B500 c client connected to xxxxx port
2013/12/07 11:53:26 143B500 c encrypted newcamd:xxxxx-client myip granted (linuxsat, au=on (1 reader))
2013/12/07 11:53:26 143B500 c user test1 authenticated successfully (CCcam)
2013/12/07 11:53:26 143B500 c AU disabled for user test1 -
There is no error, oscam is working properly.. Oscam is cardreader and CCcam is server..
What you have deleted is the port range you use to access oscam webif within your own network.. Add it again as you will have problems accessing the webinterface without it..
Look in CCcaminfo to see server and client details..
In your browser type;
http://ip.address.of.server:16001
Access details will be found in the CCcam.cfg..
-
:79:
2013/12/08 05: 57:38 25949E0 c test1 (093E&000000/01BF/184C/88:F2315CA7DEC34E8EBA0461F027F49CA6): rejected group (0 ms) (no matching reader)
-
make sure your user has access to the same group as the reader
-
If your still not sorted, post configs removing user, password's & IP address's:
oscam.conf, oscam.user, oscam.server & cccam.cfg -
Code
Display More[global] logfile = /var/log/oscam.log disableuserfile = 0 nice = -1 preferlocalcards = 1 usrfile = 1 [newcamd] port = 13001@093E:000000 key = 0102030405060708091011121314 keepalive = 1 mgclient = 1
Code[reader] label = VIASAT protocol = pcsc device = 0 emmcache = 1,3,2 group = 1 caid = 093E ident = 093E:000000
Code
Display MoreSERVER LISTEN PORT : 13000 ALLOW TELNETINFO: yes ALLOW WEBINFO: yes WEBINFO USERNAME :pass WEBINFO PASSWORD :pass TELNETINFO USERNAME :pass TELNETINFO PASSWORD :pass TELNETINFO LISTEN PORT : 16000 WEBINFO LISTEN PORT : 16001 ZAP OSD TIME :0 OSD USERNAME :pass OSD PASSWORD :pass OSD PORT :80 SHOW TIMING : yes DEBUG : no NEWCAMD CONF : no SHOW EXTENEDED CLIENT INFO : yes MINI OSD : no CHANNELINFO FILE : /var/etc/CCcam.channelinfo PROVIDERINFO FILE : /var/etc/CCcam.providers CAID PRIO FILE : /var/etc/CCcam.prio LOG WARNINGS : /tmp/warnings.txt SOFTKEY FILE : /var/keys/SoftCam.Key AUTOROLL FILE : /var/keys/AutoRoll.Key DVB API: -1 #STATIC CW FILE : /var/keys/constant.cw #BOXKEY: #SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
-
:79:
2013/12/08 05: 57:38 25949E0 c test1 (093E&000000/01BF/184C/88:F2315CA7DEC34E8EBA0461F027F49CA6): rejected group (0 ms) (no matching reader)
This log and the configs you posted do not match.. There is no [account] setup for user "test", only this user = username
I said previously that all clients should now be setup in the CCcam.cfg..
Look in CCcaminfo to track client information..
-
2013/12/08 19: 57:23 1C69B90 c linuxsat (093E&000000/0119/18C4/88:26317033CF8A8EA5222EE13F12DD1BBA): rejected group (0 ms) (no matching reader)
2013/12/08 19: 57:33 1C69B90 c linuxsat (093E&000000/0119/18C4/88:7E25419839B0DD1D0B08081EDF43D6EC): rejected group (0 ms) (no matching reader)
2013/12/08 19: 57:45 1C69B90 c linuxsat (093E&000000/0119/18C4/88:C4C8C05F20A7957729A41517EE794835): rejected group (0 ms) (no matching reader)
2013/12/08 19: 57:53 1C69B90 c linuxsat (093E&000000/0119/18C4/88:4B142C488AB34846DA34BBAEB67296D1): rejected group (0 ms) (no matching reader)
2013/12/08 19: 58:03 1C69B90 c linuxsat (093E&000000/0119/18C4/88:6FB36B803444FD8726698C0252E05AD2): rejected group (0 ms) (no matching reader)
2013/12/08 19: 58:04 1C69B90 c linuxsat (093E&000000/01E4/0FC8/AA:19ADFF9148B3217E5A91D5DCD7A6D02C): rejected group (0 ms) (no matching reader)
2013/12/08 19: 59:02 1C69B90 c linuxsat (093E&000000/0070/0C6C/88:54A2241C2FDCAA91164AF4BA44553C8F): rejected group (0 ms) (no matching reader)i changed for safety user = linuxsat
do i need to ?
BOXKEY:
boxid=[account]
user = linuxsat
pwd =
caid = 093E
au = VIASAT
group = 1
ident = 093E:0000002013/12/08 19: 58:04 1C69B90 c linuxsat (093E&000000/01E4/0FC8/AA:19ADFF9148B3217E5A91D5DCD7A6D02C): rejected group (0 ms) (no matching reader)
2013/12/08 19: 59:02 1C69B90 c linuxsat (093E&000000/0070/0C6C/88:54A2241C2FDCAA91164AF4BA44553C8F): rejected group (0 ms) (no matching reader) -
Any more suggestions l would like to see a picture on my tely instead of scrambled pls guys and without your help I'm not gonna get where l want to
-
http://linuxsat-support.com/showthread.php?t=14106 have a look here you have no nline is your cccam.cfg if your going to use oscam/.cccam note the port you should maybe just have oscam and cccam on your machine and use the cccam.cfg in the etc folder just over write and do the same with all the files in tuxbox and reboot , making sure your card is in the right slot , will be your fastest and easiest way to get working
-
If you are still stuck i can help with team viewer tomorrow day time when im up and about
-
I will gonna go through this tutorial and compare my settings l don't want delete my existing settings because that they been writing by master G so they have to be correct.
I do have nline just don't want show on forum safety first he he
-
your missing out the bits that need to be seen you can change the passwords /users your question is why you cannot connect if no one sees you have an nline they will think it that , I would like to think most users are here to help not catch you out , even what you posted earlier didnt match so how can you get helped
-
Is all up and runing :69: thanks guys for help big thanks to master G
-
master G
Set the Label from Viasat OSCam to Nagra Cards OSCam
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!