Oscam and UM01

lemi · Dec 10th 2013

I'm trying to run UM01 card(Unitymedia cabel) on DM500c(Jeffzapp backup image) with OSCAM ymod v18-t49 but not a chance to get it??!!
The same card and same oscam config( From Oscam_config_creator)works on GigaBlue UE without any problems.On DM500c with Scam too!! I really don't know what to do any more:72:Please take a look in oscam log :

Code

>> OSCam <<  cardserver started at Tue Dec 10 16:44:17 2013
-------------------------------------------------------------------------------
2013/12/10 16:44:17 1849 300162D0 s >> OSCam <<  cardserver started version ymodv18-t49, build #0 (powerpc-tuxbox-linux)
2013/12/10 16:44:17 1849 300162D0 s version=ymodv18-t49, build #0, system=powerpc-tuxbox-linux, nice=-1
2013/12/10 16:44:17 1849 300162D0 s client max. idle=120 sec, debug level=0
2013/12/10 16:44:17 1849 300162D0 s max. logsize=256 Kb
2013/12/10 16:44:17 1849 300162D0 s client timeout=6000 ms, fallback timeout=3000 ms, fallbacks=1, cache delay=0 ms
2013/12/10 16:44:17 1849 300162D0 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2013/12/10 16:44:17 1849 300162D0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/12/10 16:44:17 1849 300162D0 s signal handling initialized (type=sysv)
2013/12/10 16:44:17 1849 300162D0 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2013/12/10 16:44:17 1849 300162D0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2013/12/10 16:44:17 1849 300162D0 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2013/12/10 16:44:17 1849 300162D0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) i***** guessing not loaded
2013/12/10 16:44:17 1849 300162D0 s can't open file "/var/tuxbox/config/oscam.keys" softcam keys not loaded
2013/12/10 16:44:17 1849 300162D0 s monitor: disabled
2013/12/10 16:44:17 1849 300162D0 s camd33: disabled
2013/12/10 16:44:17 1849 300162D0 s camd35: disabled
2013/12/10 16:44:17 1849 300162D0 s cs378x: disabled
2013/12/10 16:44:17 1849 300162D0 s newcamd: disabled
2013/12/10 16:44:17 1849 300162D0 s cccam: disabled
2013/12/10 16:44:17 1849 300162D0 s radegast: disabled
2013/12/10 16:44:17 1849 300162D0 s http thread started
2013/12/10 16:44:17 1849 300162D0 s creating thread for device /dev/sci0
2013/12/10 16:44:17 1849 300162D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/10 16:44:17 1849 300162D0 s waiting for local card init
2013/12/10 16:44:17 1849 31025B50 h HTTP Server listening on port 3001
2013/12/10 16:44:17 1849 31825B50 r reader thread started (thread=31825B50, label=um01, device=/dev/sci0, detect=cd, mhz=357, cardmhz=368)
2013/12/10 16:44:17 1849 31825B50 r um01 card detected
2013/12/10 16:44:18 1849 31825B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
2013/12/10 16:44:19 1849 31825B50 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 31 30 20 52 65 76 41 32 32 15 
2013/12/10 16:44:20 1849 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/12/10 16:44:21 1849 31825B50 r detect native nagra card
2013/12/10 16:44:21 1849 31825B50 r Warning: reader um01 needed try nr 2, next ECM has some delay:
2013/12/10 16:44:21 1849 31825B50 r Warning: reader um01 needed try nr 2, next ECM has some delay:
2013/12/10 16:44:21 1849 31825B50 r card system not supported
2013/12/10 16:44:21 1849 31825B50 r Normal mode failed, reverting to Deprecated Mode
2013/12/10 16:44:21 1849 31825B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
2013/12/10 16:44:23 1849 31825B50 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 31 30 20 52 65 76 41 32 32 15 
2013/12/10 16:44:24 1849 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/12/10 16:44:26 1849 31825B50 r detect native nagra card
2013/12/10 16:44:28 1849 31825B50 r Warning: reader um01 needed try nr 2, next ECM has some delay:
2013/12/10 16:44:32 1849 31825B50 r Warning: reader um01 needed try nr 2, next ECM has some delay:
2013/12/10 16:44:34 1849 31825B50 r card system not supported
2013/12/10 16:44:34 1849 31825B50 r card initializing error
2013/12/10 16:44:35 1849 300162D0 s init for all local cards done
2013/12/10 16:44:35 1849 300162D0 s anti cascading disabled
2013/12/10 16:44:35 1849 32026B50 c plain dvbapi-client granted (DVBApi, au=auto (1 reader))
2013/12/10 16:44:35 1849 32026B50 c dvbapi: 0 entries read from oscam.dvbapi
2013/12/10 16:44:35 1849 32026B50 c dvbapi: found pmt file /tmp/pmt.tmp
2013/12/10 16:44:35 1849 32026B50 c dvbapi: found pmt file /tmp/pmt.tmp
2013/12/10 16:44:35 1849 32026B50 c dvbapi: found pmt file /tmp/pmt.tmp
2013/12/10 16:44:35 1849 32026B50 c dvbapi: [ADD PID 0] CAID: 1831	ECM_PID: 02F8	PROVID: 000000
2013/12/10 16:44:35 1849 32026B50 c dvbapi: [ADD PID 1] CAID: 1722	ECM_PID: 02F9	PROVID: 000000
2013/12/10 16:44:35 1849 32026B50 c dvbapi: [ADD PID 2] CAID: 1850	ECM_PID: 02FA	PROVID: 000000
2013/12/10 16:44:35 1849 32026B50 c dvbapi: [ADD PID 3] CAID: 1838	ECM_PID: 0AC8	PROVID: 000000
2013/12/10 16:44:35 1849 32026B50 c dvbapi: [ADD PID 4] CAID: 1835	ECM_PID: 0ACA	PROVID: 000000
2013/12/10 16:44:35 1849 32026B50 c dvbapi: new program number: 4AAC (1831:4AAC unknown)
2013/12/10 16:44:35 1849 32026B50 c dvbapi: [ADD PID 0] CAID: 1831	ECM_PID: 02F8	PROVID: 000000
2013/12/10 16:44:35 1849 32026B50 c dvbapi: [ADD PID 0] CAID: 1831	ECM_PID: 02F8	PROVID: 000000
2013/12/10 16:44:35 1849 32026B50 c dvbapi: stoping demux for pmt file /tmp/pmt.tmp
2013/12/10 16:44:35 1849 32026B50 c dvbapi: [ADD PID 1] CAID: 1722	ECM_PID: 02F9	PROVID: 000000
2013/12/10 16:44:35 1849 32026B50 c dvbapi: [ADD PID 2] CAID: 1850	ECM_PID: 02FA	PROVID: 000000
2013/12/10 16:44:35 1849 32026B50 c dvbapi: [ADD PID 3] CAID: 1838	ECM_PID: 0AC8	PROVID: 000000
2013/12/10 16:44:35 1849 32026B50 c dvbapi: [ADD PID 4] CAID: 1835	ECM_PID: 0ACA	PROVID: 000000
2013/12/10 16:44:35 1849 32026B50 c dvbapi: new program number: 4AAC ()
2013/12/10 16:44:35 1849 32026B50 c DVBApi (1831&000000/4AAC/02F8/0000/4A:7FFA/00-00): not found (1 ms) by um01
2013/12/10 16:44:35 1849 32026B50 c DVBApi (1722&000000/4AAC/02F9/0000/93:550F/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:35 1849 32026B50 c DVBApi (1850&000000/4AAC/02FA/0000/B7:BD08/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:35 1849 32026B50 c DVBApi (1838&000000/4AAC/0AC8/0000/92:EC24/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:35 1849 32026B50 c dvbapi: try pids again #1
2013/12/10 16:44:35 1849 32026B50 c DVBApi (1835&000000/4AAC/0ACA/0000/89:BC4B/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:35 1849 32026B50 c DVBApi (1831&000000/4AAC/02F8/0000/4A:7FFA/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:35 1849 32026B50 c DVBApi (1722&000000/4AAC/02F9/0000/93:550F/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:35 1849 32026B50 c DVBApi (1850&000000/4AAC/02FA/0000/B7:BD08/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:36 1849 32026B50 c DVBApi (1838&000000/4AAC/0AC8/0000/92:EC24/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:36 1849 32026B50 c dvbapi: try pids again #2
2013/12/10 16:44:36 1849 32026B50 c DVBApi (1835&000000/4AAC/0ACA/0000/89:BC4B/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:36 1849 32026B50 c DVBApi (1831&000000/4AAC/02F8/0000/4A:7FFA/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:36 1849 32026B50 c DVBApi (1722&000000/4AAC/02F9/0000/93:550F/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:36 1849 32026B50 c DVBApi (1850&000000/4AAC/02FA/0000/B7:BD08/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:36 1849 32026B50 c DVBApi (1838&000000/4AAC/0AC8/0000/92:EC24/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:36 1849 32026B50 c dvbapi: try pids again #3
2013/12/10 16:44:36 1849 32026B50 c dvbapi: can't decode channel
2013/12/10 16:44:36 1849 32026B50 c DVBApi (1835&000000/4AAC/0ACA/0000/89:BC4B/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:37 1849 32026B50 c dvbapi: [ADD PID 5] CAID: 1831	ECM_PID: 02F8	PROVID: 000000
2013/12/10 16:44:37 1849 32026B50 c dvbapi: [ADD PID 6] CAID: 1722	ECM_PID: 02F9	PROVID: 000000
2013/12/10 16:44:37 1849 32026B50 c dvbapi: [ADD PID 7] CAID: 1850	ECM_PID: 02FA	PROVID: 000000
2013/12/10 16:44:37 1849 32026B50 c dvbapi: [ADD PID 8] CAID: 1838	ECM_PID: 0AC8	PROVID: 000000
2013/12/10 16:44:37 1849 32026B50 c dvbapi: [ADD PID 9] CAID: 1835	ECM_PID: 0ACA	PROVID: 000000
2013/12/10 16:44:37 1849 32026B50 c dvbapi: new program number: 4AAC (0000:4AAC unknown)
2013/12/10 16:44:37 1849 32026B50 c dvbapi: can't decode channel
2013/12/10 16:44:37 1849 32026B50 c DVBApi (1722&000000/4AAC/02F9/0000/93:550F/00-00): rejected group (0 ms) (no matching reader)
2013/12/10 16:44:40 1849 32026B50 c dvbapi: can't decode channel
2013/12/10 16:44:40 1849 32026B50 c DVBApi (1722&000000/4AAC/02F9/0000/93:7663/00-00): rejected group (1 ms) (no matching reader)
2013/12/10 16:44:50 1849 32026B50 c dvbapi: can't decode channel
2013/12/10 16:44:50 1849 32026B50 c DVBApi (1722&000000/4AAC/02F9/0000/93:E7F3/00-00): rejected group (0 ms) (no matching reader)
2013/12/10 16:45:00 1849 32026B50 c dvbapi: can't decode channel
2013/12/10 16:45:00 1849 32026B50 c DVBApi (1722&000000/4AAC/02F9/0000/93:60C7/00-00): rejected group (0 ms) (no matching reader)

Display More

Ooscam config

Code

#---Oscam Config Creator---




[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
lb_auto_betatunnel = 0
logfile = /tmp/oscam.log;stdout
maxlogsize = 256




[webif]
HttpPort = 3001
HttpUser = 
HttpPWD = 
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.255.255
HttpReadOnly = 1




[dvbapi]
Enabled = 1
Boxtype = coolstream
User = DVBApi
decodeforever = 1
AU = 1

Display More

Oscam server

Code

---Oscam Config Creator---




[reader]
label = UM01
protocol = internal
device = /dev/sci0
detect = CD
cardmhz = 368
caid = 1831
rsakey = B55E............FF
boxkey = A7...............7C
group = 1
emmcache = 1,1,2

Display More

Oscam user

Code

#---Oscam Config Creator---




[account]
User = DVBApi
AU = 1
Group = 1

Thank you!!

lemi · Dec 19th 2013

Problem solved! You can close this thread.

Oscam and UM01

Your resource for OSCam softcam

Participate now!

Share

Tags