I'mm installing the OSCam server op Raspberry, and it starts, so far so good.
Now I want to get my Cardreader to work properly.'s an
it's an 'ACR38 USB Reader'
after installing the drivers, DMESG displays :
Quote[ 3.251810] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
[ 3.391305] usb 1-1.3: New USB device found, idVendor=072f, idProduct=9000
[ 3.411246] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.427377] usb 1-1.3: Product: ACR38 USB Reader
[ 3.441571] usb 1-1.3: Manufacturer: ACS
[ 3.762582] udevd[154]: starting version 175
LSBUB gives also :
Quoteroot@raspberrypi:~# lsusb
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 004: ID 072f:9000 Advanced Card Systems, Ltd ACR38 AC1038-based Smart Card Reader
And it even reads the card :
Quoteroot@raspberrypi:~# opensc-tool -a
Using reader with a card: ACS ACR38U 00 00
3b:f7:11:00:01:40:96:70:70:0a:0e:6c:xx:xx
But I can't find it it the /dev? i suppose it would be like : /dev/ttyUSB0
but unfortunally it doesn't.
is there a way I can find what port it uses, so I can add that link to the OSCAM config?
