Problem with one oscam reader"): timeout (5000 ms) "

There are 3 replies in this Thread which was already clicked 3,581 times. The last Post () by csarg.

    Hi All Happy New year:41_002:
    I am running a debian server with 2 cards one Smargo reader and one pcsc cardreader. I use oscam r9160. The card i have in smargo reader i have trouble with i get this message:
    "User (0B00&000000/0000/0CEB/7B:7795B6978A4C8591B2A1942D4C31A78B): timeout (5001 ms) by canaldigital - C More Action"
    This happens until a day has gone.
    Anyone help me?? Here are my conf.
    -------------------------------------
    [global]
    logfile = /var/oscamlog/oscam.log
    nice = -1
    preferlocalcards = 1
    emmlogdir = /var/oscamlog/


    [cccam]
    port = xxxxx
    nodeid = 6DDFCF9610511546
    version = 2.3.0
    reshare = 12


    [webif]
    httpport = xxxx
    httprefresh = 15
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    -----------------------------------
    [reader]
    label = VIASAT
    description = SERIAL READER
    protocol = pcsc
    device = 0
    caid = 093E
    boxid = xxxxxxxx
    detect = cd
    mhz = 378
    cardmhz = 378
    ident = 093E:000000
    group = 1
    emmcache = 1,3,2


    [reader]
    label = canaldigital
    description = SERIAL READER
    protocol = smargo
    device = /dev/ttyUSB0
    smargopatch = 1
    caid = 0B00
    detect = cd
    mhz = 500
    ident = 0B00:000000
    group = 1
    emmcache = 1,3,2
    ------------------------------------------
    [account]
    user = user
    pwd = passw
    group = 1
    cccmaxhops = 1
    cccreshare = 1
    -----------------------------------------

    hi
    i had this problem on nds card
    was driving me mad.
    my solution was
    in oscam cfg


    clienttimeout = 580
    fallbacktimeout = 580


    the numbers might be diferent.
    if u use loadbalancing, then there is another solution


    this works for nds uk cardç


    lb_mode = 1
    lb_save = 2000
    lb_nbest_readers = 1
    lb_nfb_readers = 2
    lb_reopen_mode = 1
    lb_reopen_seconds = 30
    lb_nbest_percaid =
    lb_min_ecmcount = 2
    lb_max_ecmcount = 500
    lb_retrylimit = 2800
    lb_retrylimits = 09:480,17:5500
    lb_savepath = /var/etc/stat
    lb_stat_cleanup = 336
    lb_max_readers = 1


    at least for me
    might help
    el pirate

    Change:


    [reader]
    label = canaldigital
    description = SERIAL READER
    protocol = smargo
    device = /dev/ttyUSB0
    smargopatch = 1
    caid = 0B00
    detect = cd
    mhz = 500
    ident = 0B00:000000
    group = 1
    emmcache = 1,3,2


    to


    [reader]
    label = canaldigital
    description = SERIAL READER
    protocol = smartreader
    device = 011:011 for example, in console lsusb: Bus 001 Device 011: Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
    smargopatch = 1
    caid = 0B00
    detect = cd
    mhz = 500
    ident = 0B00:000000
    group = 1
    emmcache = 1,3,2

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login