ok ten i got CccamOscamInstall.sh to install by using cd to enter /tmp directory then chmon 755 /CccamOscamInstall.sh
not sure why it wouldnt work by /tmp/CccamOscamInstall.sh?
in what directory do i store all the other files mate
Check your pm m8, the complete folder containing the rest of the files should also be put in /tmp, no need to chmod that one.
ok my server went tits up and ive had to re install everytthing but im still get the error chmod: cannot access `/tmp/CccamOscamInstall.sh': No such file or directory ive tried running ch mod from the /tmp folder but still no joy. i have also edited the CccamOscamInstall.sh file in dcc and saved it. any other ideas lads on what im doing wrong?
.
root@server:/tmp# ls
CCcam.cfg CCcam.x86 OscamCheck.sh pulse-PKdhtXMmr18n
CCcam.channelinfo configupdate.sh oscam.conf rc.local
CCcamCheck.sh keyring-OXRQR1 oscam.server ssh-ZwnzWhvH1274
CCcamOscamInstall.sh keyupdater.sh oscam.user unity_support_test.0
CCcam.prio LogCleanUp.sh proftpd.conf
CCcam.providers oscam pulse-ESp7CDKn6nEs
root@server:/tmp#
i have chmod it i believe. btw what does chmod 755 do?
root@server:/tmp# chmod 755 CCcamOscamInstall.sh
root@server:/tmp#
ok so i got it to install an extract the files and at the end it had done a reboot. when i now look in /tmp using ftp i cant see any of the files? what do i do now?
thanks mate
ok so ive done as you said those files are not in the above locations? it the same when i ftp them across and reboot its as if they dont save?
if i were to start from scratch can anybody recommend me a good tutorial???
ok so ive done as you said those files are not in the above locations? it the same when i ftp them across and reboot its as if they dont save?
Im guessing this is because you do not have the required permissions to transfer the files, make sure you are using the root account then it will work.
[h=3]Enable Root Access To Your New Ubuntu Server[/h]
Honestly ten I don't know what I'm doing wrong. I've wiped the sever a couple of times and started from scratch. Signing in as root is alway the first thing i do. Once I let the automated install take place I log into my server 192.168.1.7:8888 and it gives the error permission denied?
What programme are you using for ssh ?
Give this a try & see if you have better luck.
[h=3]Tunnelier (Bitvise)[/h]
Should I wipe the pc and reinstall Ubuntu desktop again before using this prog tunnelier? The way things are going im inclined to jus start afresh and go thru the process bit by bit with yourselves. I must be doing something incredibly stupid
Should I wipe the pc and reinstall Ubuntu desktop again before using this prog tunnelier? The way things are going im inclined to jus start afresh and go thru the process bit by bit with yourselves. I must be doing something incredibly stupid
No try the programme first, there should be no need to reinstall but if you do choose this route i would suggest using Ubuntu server edition rather than desktop unless the pc is used as more than just as a server.
[h=1][/h]
Display MoreNot sure on this one mate, may need a moderator to look at!
Just so i know what your doing?
Are you installing this on a server/standalone pc, are you typing commands on server or from another pc and copying/ftp across!
Ran this script a few times and never experianced these problems.
I switched to Debian and there is another script if you want to use this!
What is spec of your server? it may be easier for you to install a desktop version of OS, it just makes it easier to copy files/ edit e.t.c!
Found it easier that way to start off!
But in theroy
Install OS
Download files into /tmp
chmod 755 CCcamOscamInstall.sh (chmod file)
CCcamOscamInstall.sh (to run the file)
Install script runs and reboots
All files required should be in /usr/local/etc (OSCAM) /var/etc (CCCAM)
These are the files you need to edit for your setup - Card, Reader Lines e.t.c!
I would try and fix what you have done for piece of mind
but if you get stuck you could try this
ok so i have installed and am using tunnelier (i like) and i can see my 3 oscam files in /usr/local/etc (OSCAM) but there is nothing in /var/etc (CCCAM)?
ok just too clarify i have reintalled using the automated process. what do i do next.
i must point out there are no files installed in var/etc?
Display MoreWe'll you will need to create a Cccam.cfg file and FTP it to that location to see if it connects ok?
Use a program like notepad ++ for creating these files as normal notepad or word no good!
U need the Cccam file for Oscam an Cccam to connect? If u want to use both??
Can you see Oscam webinfo your.ip.address:8888 ?
Start with Link above about Cccam for newbies!
Decide or let us know what setup u plan to use? Card reader? Card? Etc there are plenty of posts for all the different setups?
If you get stuck further let us know!
cant see any info at 192.168.1.7:8888 i keep getting the error access denied. surely this is the biggest fail anyone has ever had setting up a server on this site?
is there not a manual step by step process to installing as opposed to the autoamted version? i have a smargo reader ready
Are you sure this is the correct ip that has been assigned to the server pc ?
Think someone else may have to look at this bud?
For piece of my mind what's your server setup? Standalone pc that u connect to or a fully functional setup(keyboard,etc connected?)
I went from Ubuntu to Debian but would be interesting to try n fix this one????
its a standalone pc with its own keyboard n monitor using ubuntu desktop but i do all commands from windows laptop. ihave a smargo reader ready to go.
i originally had ubuntu server set ut and was able to see the web interface. not sure why i cant get it setup on desktop here?
Are you sure this is the correct ip that has been assigned to the server pc ?
yes ten in cmd i ifconfig and it confirms this. when i enter 192.168.1.7 with out the port i get the message:
It works!
This is the default web page for this server.
The web server software is running but no content has been added, yet.
what do you think is missing mate?
here are my files below?
oscam.conf
[global]
nice = -1
WaitForCards = 1
pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw
maxlogsize = 10000
[newcamd]
port = 10000@096C:000000
key = 0102030405060708091011121314
[webif]
httpport = 8888
httpuser = user
httppwd = pass
httprefresh = 0
httpallowed = 127.0.0.1,192.168.7
httphideidleclients = 0
httpreadonly = 0
oscam.server
[reader]
label=Foxtel
protocol=SmartReader
detect=CD
group=1
emmcache=1,1,2
ecmcache=1
device=003:002
caid=096C
boxid=xxxxxxxxxx
osca.user
[account]
user=user1
pwd=pass1
group=1
uniq=0
au=Foxtel
caid=096C
ident=096C:000000
Don’t have an account yet? Register yourself now and be a part of our community!
