Is it possible, looking to flash my mothers old dm500-s but she was asking about being able to see whats on the channels.
If possible from a simple flash can anyone point me in the right direction?
Thanks!
Is it possible, looking to flash my mothers old dm500-s but she was asking about being able to see whats on the channels.
If possible from a simple flash can anyone point me in the right direction?
Thanks!
Commando 14.7 is the best option for a DM500.. You should be able to get a decent EPG with the built in AutoBouquets plugin..
ok I tried to install with flashwizard and got this message 'Too big for flash memory, try to instaall in multiboot mode'
where do I go from here?
To flash an image using Telnet
• Rename Commando_14-7-dm500 image file to backup
• Using your favourite FTP program. FTP the image file to the /tmp folder on the dm500
• Telnet to your box and type, or copy and paste the following command:
To telnet, use Dreambox Control Center, Putty or in windows click START > RUN >and type cmd. A command window will appear.
Type Telnet ip.address.of.dreambox and press enter> type root and press enter> type dreambox and press enter (if you have changed your password, enter your password instead of dreambox).
breaking my heart.... flashed it now I keep getting 'transponder scan failed' when searching for satellites and I cant seem to get a network connection to reflash either
Make sure DHCP is enabled in network settings to allow a network connection..
Add a recent satellites.xml file to /var/etc then try to rescan or use one of the latest Enigma1 channel lists..
DHCP is set to on. still not connecting to network?
Is there any other way for me to flash this box without a null modem or Ethernet cable, Ive flashed a commando image and its fucked my box... wont let me scan or connect to internet.
you will nedd to do a reflash using null moden/serial lead using dreamup
sometimes in the the telnet mode it goes pear shaped..
Don’t have an account yet? Register yourself now and be a part of our community!