A quick how to for getting mgcamd up and running on an enigma 2 receiver capable of ipk manual installation..... I only tested on a dreamelite image . You may need a different ipk for a different image
step 1 > ftp to your receiver
step 2 > transfer over the following files to the /tmp directory
step 3 > change the file attributes of recently transferred files to 755
step 4 > use ipk installer on your image to install mgcam + mgcam configs
step 5 > once installed check in your softcam menu for addition of mgcam 1.35a . If it does not appear restart enigma2
step 6 > the configuration of config files . There are only 2 which you need ever edit. newcamd.list & mg.cfg ( usr/keys or var/keys )
so the configuration ....... from elsewhere in lamen terms
To configure the newcamd ( mgcamd ) protocol we will need to edit the parameters prescribed in the file newcamd.list, which is located in the /var/keys or usr/keys of the receiver. To edit all the files necessary we use an editor that understands the line ending characters and carriage return, used in the Linux files. (such as DCC - a popular tool )
The file newcamd.list default contains the following lines:
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.1.1 20000 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server1
CWS_MULTIPLE = 192.168.1.2 20000:20005 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server2
The first line - CWS_KEEPALIVE sets the time in seconds after which the emulator MgCamd verifies connection to the server for car***aring spelled out in the port settings. Apply in the case of using NAT router, which disconnects inactive connections or when you open encrypted channels after the transition from open to them.
In the second line CWS_INCOMING_PORT given port to listen for incoming connections from the server, this line can be omitted.
Next in line CWS prescribed parameters cardsharing server to open a particular package.
Instead of 192.168.1.1 would require a real IP or domain address server car***aring, followed by the server port - 20000, instead of which prescribes working for a specific package of channels, then follow the login and password - dummy dummy, which is also the right to correct, then the DES key states - 10 02 13 04 15 06 17 08 01 10 11 12 13 14, which in most cases, changes to 01 02 03 04 05 06 07 08 09 10 11 12 13 14 and in custody should be - lan server1, which in most cases do not affect cardsharing work, and are only used when applying camdcmd protocol.
In the case of more than one port to open multiple channel packages, you need to add extra lines to the ports used, for example:
CWS = xxxxxxxxx.com 40000 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = xxxxxxxxx.com 40001 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = xxxxxxxxx.com 40002 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
If ports are to be used in order, you can register them in one line:
CWS_MULTIPLE = xxxxxxxxx.com 40000:40002 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
The second file i referenced to is the mg.cfg . This is not really needed to be edited unless you know what your doing. I shall post another tutorial just for this file . The default file will get you going though !!!
Enjoy
New2
Any questions post away
