Enhanced Movie Center (EMC) V.2.0.2 by Coolman & Swiss-MAD
FeatureList V.2.0.2
Many file types are listed and played with appropriate hardware:
Video: [,,,,,,,,, '' ts. '' Avi '.' Divx '.' F4v. '' Flv '.' Img '.' Iso '.' M2ts '.' M4v '.. mkv ','. mov ','. mp4 ','. mpeg ','. mpg ','. mts ','. vob ']
Audio: [. 'Ac3'. 'Dts'. 'Flac'. 'M4a'. 'Mp2'. 'Mp3'. 'Ogg'. 'Wav',,,,,,,]
EMC has its own player frontend "EMCMediaCenter" with all the formats that your Dreambox, can also be played.
For the back end of the E2 movie player, the GStreamer plugin and the DVD player plugin can be used.
(So must be installed for DVD formats, the DVD Player plugin also.)
(Of course, the "EMCMediaCenter" fully skinned, it will only own converter were used, it can be integrated into an existing skin.)
The various formats will be marked with corresponding icons.
Symlinks are displayed and marked with a special icon. (Not on when the target exists, the symlink is not displayed.)
It can be used in EMC's new symlinks are created.
EMC can create your own bookmarks
The date display can be setup in the switch on / off. (It is used dd.mm.yyyy)
File order can be switched by date or name. In the setup, the sort order can be reversed.
For all types of files, there is a status / progress bar. The setup can be set between "progressbar", "% display" or "OFF".
Movie icon and progress bar can take four colors: Not seen [white] alluded to, [blue], ready seen [green], even during the recording [red]
The setup can be adjusted from vieviel percent of the progressbar and the icon will change color.
The colors of ProgressBar you can turn off if you adjust the setup to 0% and 100%, or will each have only one at the end of any color change (eg 5% and 100%, or 0% and 90%.)
The film status may now be running in three states [radio button]. Not seen, played, seen finished.
If the state "played" out of switch (set to "Not Seen" or "pre-seen"), the last position (last played) is converted into a marker.
Thus appears from the status "not seen" or "pre-seen" No confirmation will be continued if the last position. Can while still enjoying the "<" and ">" button takes you to the last position as a marker was placed here.
On the menu, all markers are removed "Remove all film-markers". This is also useful if you change to the status of the "Last Played" and each one gets everything back markers will be going on.
The switch status of the [radio button] can also be selected with a list of film (more than one movie at a time) to be made (ONLY on status "not viewed" and "Seen Done").
For all the listed video and audio formats is a "cuts" file created (E2 compliant), as well as for making recordings in E2 *. ts one point stopped, continued to "resume" is possible, and markers can be set.
NOT even for *. ts files can e.g. can EITitor with a *. *. ince or are created in the meta description can be stored.
Current recordings are shown and labeled specifically.
With the [video / PVR] or [TEXT] key entries can be highlighted. Thus, all selected entries are deleted simultaneously / moved / played sequentially / or status change.
With the [TEXT] key to start from the position right away everything in between are marked with the cursor.
The [Bouquet] keys to scroll can be the beginning or the end of the list. With the [cursor left / right] side manner.
LONG with [video / PVR], all marks are removed.
DVD folders (VIDEO_TS VOB), are shown with the directory name and can be played directly without having to navigate to the VIDEO_TS directory to have.
"Play All": The [Play] button (the old remote with [Shift] - [green] = play) will play all files in the current directory starting at the cursor at the end and start again from scratch.
If the cursor is on a directory, all files are played in the directory.
(Even in very large media collection is no delay at the start, because the playlist is determined dynamically.
With [long info] of titles in the IMDb (The Internet Movie Database) to be queried. (IMDb plugin must be installed for that.)
When you can play with EMC in the [green] between pillarbox, panscan, and just scale switch.
If EMC is finished, put back on the presetting E2.
Automatic Trash:
The Recycle Bin is emptied at the designated time, or at the start of E 2, if no recording is in progress, pending or within 10 minutes of a recording.
In operation, the trash is not emptied when a recording is being made or is pending within 10 minutes of recording.
Could result from upcoming recordings or recordings are not deleted is checked every 30 minutes until no longer being recorded, and no record is present within 10 minutes .... then is deleted.
Nearest deletion happens again the next day after the set time.
Of course, ONLY delete the files that linger even longer in the Recycle Bin as set in the setup.
This set per day 24 hours residence time required and not simply looked at the date.
(Because otherwise it could happen so close to midnight what I delete, and delete is set to 01:00 clock recording only a little over 1 hour in the trash was.)
All this runs independently from EMC in the background, it must be to not be called EMC to the Recycle Bin is emptied.
Setup item "list is skinable film":
YES = values from the widget name = "list" are used from the skin.
NO = default values from the plugin to be used for widget name = "list".
Thus the possibility exists two different views of the setup switch (or the default skin), if the skin is present.
(Anyone still supports used a skin of the old version of EMC, can also be placed in the setup to NO.)
The E2 timers list can be accessed by pressing the [TV long] out directly from EMC.
Currently available languages are: English, German, Dutch, Polish, Slovak, and Italian (thanks to Bschaar, ni_hao, jkkk, Spaeleus and kosmacz for the translation).
Special thanks naturally Coolman, cmikula, and concrete mixers, Olli42, AndyMt because they have a lot of code written by and nights-programmed!
Thanks also to salzrat, zombi, Erim, and for the translations to Bschaar, ni_hao, jkkk, Spaeleus and kosmacz.
Many thanks to all beta testers
Keys from EMC and its function:
Features in the film list:
- TAX CROSS: navigation list in the film (<and> keys scroll whole pages)
- BOUQUET: Scrolls to the beginning or the end of the list
- Press "<": a directory layer
- Press ">": back to the previous directory. (Only the last directory will be noted.)
- INFO: Default Enigma2 EPG info (EventView)
- Long INFO: Query title in the IMDb (The Internet Movie Database). (IMDb plugin must be installed for that.)
- MENU: EMC function menu (EMC functions) and movie menu plugin (plugins like moviecut film, etc.)
- Long MENU: movie menu plugin (plugins like moviecut film, etc.)
- AUDIO: Film menu plugin (plugins like moviecut film, etc.)
- RADIO: toggles between seen and unseen alluded
- TV: Load current directory new
- TV time: Gets the timer list of E2. (Eg if virtually a repeat of the timer is active is to be stopped, because that is not directly in EMC.)
- VIDEO (PVR): Movie deselect / for multiple selection
(To delete multiple movies simultaneously move / / game status change, or play in the selected order).
- VIDEO (PVR) long: Remove all markings
- TEXT: Multiple selection / demarcation of -> UP position (mode is switched back and forth (toggle)).
(To delete multiple movies simultaneously move / / game status change, or play in the selected order).
- OK: Plays from current cursor position / Plays all selected films in order from labeled (playlist)).
- PLAY: (Old Remote Control [Shift] - [green] = play) "Play All" plays all files from current cursor position after starting the series, and starts all over again from the end.
If the cursor is on a directory whose contents will be played in sequence, starting from the end and over again.
- RED: Delete current cursor position / Delete all selected files
(Deletes directly if the setup is "whereabouts of the files in the Recycle Bin (days)" to 0)
Stop the recording when the recording is still active. (Not for repeat timers, then TV took advantage long into the timer list go to E2.)
- GREEN: toggle between sorting by alphabet / date
- YELLOW: displacement current cursor position (LocationBox opens for destination entry)
(If anything marks can also be moved without LocationBox when the cursor is on the destination).
- BLUE: go to "home movie" or play "last film" From (In the setup function which adjustable)
- Press "0", "home movie" go after. (Eg practice, if [BLUE] button is configured to "last film".)
- BLUE long: call EMC bookmarks.
- HELP: List of key assignment
While playing a recording:
- RADIO: ext. Plugin menu (as with E2 or blue button when BluePanel exisitiert in long blue.)
- DIRECTIONAL PAD UP / DOWN: Call of EMC
- INFO: See description EPG recording.
- TEXT: teletext picture is displayed.
- GREEN: Switching between pillarbox, panscan, and "just scale".
While playing a DVD:
- MENU: DVD-menu
- CHANNEL: next / previous chapter
- CHANNEL long: next / previous track
- BOUQUET: Go to the next chapter
- BOUQUET long: Go to the next track.
- AUDIO: Audio Track menu
- AUDIO long: audio menu of the DVD
- RADIO: Switch audio track
- Long RADIO: DVD-Audio menu
- TEXT: toggle subtitles on /.
- TEXT: toggle subtitles on /
- VIDEO (PVR): Next perspective
In the menu "Bookmarks window"
- RED: Delete Bookmarks
Display More
Create symlink with EMC:
With the "<" button (next to zero) to the extent that it reaches back to the target directory (you can go to root, from there, usually on the disks under / media or / autofs).
With the cursor on the directory or file you want to go for creating a symlink.
(eg / ev autofs/sdb1 and film since the directory on the disk.)
[MENU - [create symlink] then navigate right where the symlink will be created then. Most probably in / media / hdd / movie / [OK]
With [Movie Home] back to / media / hdd / movie / or via bookmark, and though the directory does not reload, do it with [TV].
To add a symlink from e.g. an ext. To make the internal drive back to exactly the same as picking the reverse path. So you can easily jump from two plates back and forth.
The symlink name begins with "-" He is right at the beginning before "A" and "1".
Recordings in the current directory of hotels.
Movie search plugin - Search Movies in the film list has been adapted to EMC.
The plugin is found on the experimental feeds,
or installed directly from an experimental image from the feed.
Call from EMC with the [AUDIO] or [MENU] or [MENU long].
After a search from the search results can still be restricted by a further search.
EMC install the GP3 from Blue Panel (new version if available):
BP -> Settings -> General:
"Use extra plugins? TO
save
Return to Addons:
Plugins (extensions) 97
in there, then "Update" button Blue
After that the "enigma2-plugin-extensions-enhancedmoviecenter" be seen and can be installed.
Plugin List Movie Preview
There is the plugin Preview Movie List an extra on EMC adapted version of the Coolman & zombi - can be found -> HERE <<.
With this you can create thumbnails for the recordings.
get_imdb_poster for EMC
dirtylion a small shell script is created that looks at the imdb automatically after the covers of your movies.
These are then to discard and thus appears with Movie Preview List. ---> Get_imdb_poster for EMC (Movie Preview List)
__________________________________________________ ___
E2 bookmarks set when EMC is installed.
Since this issue surfaced again and again, I did this once ---> HERE <--- described.
__________________________________________________ ___
Video Review of ***watcher
There already is a video review of the ***watcher showing some capabilities of EMC.
Enhanced Movie Review by ***watcher Center v2.0.0
Information for Skinner
Values for the film list (listbox) in <widget name = "list":
(Some settings are only used if the Setup "movie list is skinable" is turned on)
(Skin templates are in / usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/CoolSkin /)
cool font = "Regular, 20": font and size of the movie list
cool selectfont = "Regular, 20": font and size of the marker points [video] key
(Thus, with a wide font for the movie list is a narrow font used for labeling so that the marker does not fail to be wider than the icon. Most fonts can be used but the same as in cool font =.)
cool folder size = "500" width directory names
CoolMoviePos = "95" position movie name
cool movie size = "450" width Movie Name
cool date font = "Regular, 20": font and size for dates
CoolDatePos = "495": positons Date
cool date width = "110" width Date
CoolBarPos = "30": position of progressbar
CoolBarHPos = "8" height position progressbar
CoolBarSize = "55.10": width and height of the progressbar
CoolBarSizeSa = "110.16" width and height of the progressbar if in the setup "movie list is skinable" ("listbox is skin able") is set to YES.
CoolProgressPos = "1000": position of the progress indicator in%
(Sol only the progressbar or the% display are presented, simply slide the unnecessary display outside the visible range.)
cool date color = "0": "0" = the date that is always white, "1" = the date that is as colorful as the Progress Indicator
default color = "# FFFFFF": color of progressbar if the colors were deactivated in the setup (% 0 and 100)
UnwatchedColor = "# FFFFFF": color of progressbar "status unseen"
watching color = "# 3486F4": color of progressbar "status alluded"
FinishedColor = "# 46D93A" color progressbar "status seen Done"
recording color = "# 9F1313" color for progress bar "while shooting or cutting process with moviecut plugin"
BackColorSel = "# 000000": background color for the cursor
Converter "EMCMediaCenter" (movie player skin)
-------------------------------------------------
If EMCClockToText = used for the presentation of the film length and the date, time
EMCEventName = Sets. Ince or. Meta movie information in form
EMCServicePosition = Represents the Cutlist marker for non-TS movies
EMCServiceTime = Calculates the length film, if possible, not for TS movies
Display More