Hi,
I have some trouble to run enigma 2 :
- A lot of errors occured (it seems that some interfaces are missing on my target board).
- enigma crash at the end
Do you know the list of required services to get back something on screen ?
What are the most critical errors to fix ?
Could you help me please ?
Here is a small log of enigma2
Thanks in advance,
Code
PYTHONPATH: /usr/local/lib/enigma2/python:/usr/local/lib/python2.7:/usr/local/lib/python2.7/lib-dynload:/usr/lib/python2.7/:/usr/lib/python2.7/lib-dynload
+ (30) eActionMap
+ (1) Background File Eraser
+ (20) RC Input layer
+ (21) input device driver
+ (21) Console RC Driver
+ (20) AVSwitch Driver
+ (20) UHF Modulator
+ (20) misc options
+ (21) LIRC RC Driver
+ (35) CI Slots
+ (20) DVB-CI UI
+ (10) gRC
+ (9) Font Render Class
+ (9) GFBDC
+ (9) gLCDDC
+ (8) graphics acceleration manager
+ (15) eWindowStyleManager
+ (40) eServiceCenter
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryFS
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (9) GFBDC
resolution read out from fb: 1920 x 1080
16220kB available for acceleration surfaces.
resolution: 1920 x 1080 x 32 (stride: 7680)
+ (9) gLCDDC
couldn't open LCD - load lcd.o!The interface /dev/dbox/lcd0 doesn't exist on my target board.
Code
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) RC Input layer
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!Enigma try to open the following file (without succes) :
/proc/stb/fp/lnb_sense%d", m_slotid)
Then it try to listen the interface associated to the front processor. The interface doesn't exist on my target board.
// open
int fp=::open("/dev/dbox/fp0", O_RDWR);
Code
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!The interface doesn't exist on the target board.
Code
+ (20) misc options
+ (20) DVB-CI UI
+ (21) input device driver
Found 0 input devices!
+ (21) Console RC Driver
failed to open /dev/vc/0The interface doesn't exist on the target board.
Code
+ (21) LIRC RC Driver
[elirc] open [f:/dev/lirc0] [h:8]
[elirc] #error# cannot connect to lircThe interface exist yet and the process /usr/sbin/lircd has been started. est bien lancé. I haved notice the following stack trace in my kernel log
« [ 753.000000] lirc-stm: IR RX overrun »
Code
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slotsThe interface doesn't exist on the target board.
Code
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryFS
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 2945 services
scanning for frontends..
opening frontend 0
detected terrestrial frontend
close frontend 0
opening frontend 1
detected terrestrial frontend
close frontend 1
opening frontend 2
detected terrestrial frontend
close frontend 2
opening frontend 3
detected terrestrial frontend
close frontend 3
opening frontend 4
unknown frontend type.
unknown frontend type.
opening frontend 5
unknown frontend type.
unknown frontend type.
opening frontend 6
unknown frontend type.
unknown frontend type.
found 1 adapter, 4 frontends(4 sim) and 8 demux
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache
[EPGC] time updated.. start EPG Mainloop
Loading spinners...
found 4 spinner!
executing main
setIoPrio best-effort level 3 ok
=>initTvui()
[FONT] adding font /usr/local/lib/seashell/Vera.ttf...OK (abalone-sans)
[FONT] adding font /usr/local/lib/seashell/VeraBd.ttf...OK (abalone-sans-bold)
Server: connect from
couldn't open fpThe interface doesn't exist on the target board.
Python
enumerating block devices...
found block device 'sda': ok, removable=True, cdrom=False, partitions=['sda1'], device=sda
found block device 'ram0': ok, removable=False, cdrom=False, partitions=[], device=ram0
found block device 'ram1': ok, removable=False, cdrom=False, partitions=[], device=ram1
found block device 'ram2': ok, removable=False, cdrom=False, partitions=[], device=ram2
found block device 'ram3': ok, removable=False, cdrom=False, partitions=[], device=ram3
found block device 'ram4': ok, removable=False, cdrom=False, partitions=[], device=ram4
found block device 'ram5': ok, removable=False, cdrom=False, partitions=[], device=ram5
found block device 'ram6': ok, removable=False, cdrom=False, partitions=[], device=ram6
found block device 'ram7': ok, removable=False, cdrom=False, partitions=[], device=ram7
found block device 'ram8': ok, removable=False, cdrom=False, partitions=[], device=ram8
found block device 'ram9': ok, removable=False, cdrom=False, partitions=[], device=ram9
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'ram10': ok, removable=False, cdrom=False, partitions=[], device=ram10
found block device 'ram11': ok, removable=False, cdrom=False, partitions=[], device=ram11
found block device 'ram12': ok, removable=False, cdrom=False, partitions=[], device=ram12
found block device 'ram13': ok, removable=False, cdrom=False, partitions=[], device=ram13
found block device 'ram14': ok, removable=False, cdrom=False, partitions=[], device=ram14
found block device 'ram15': ok, removable=False, cdrom=False, partitions=[], device=ram15
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
found block device 'mtdblock5': blacklisted
sec config cleared
Traceback (most recent call last):
File "/usr/local/lib/enigma2/python/mytest.py", line 28, in <module>
import Screens.InfoBar
File "/usr/local/lib/enigma2/python/Screens/InfoBar.py", line 12, in <module>
from Screens.InfoBarGenerics import InfoBarShowHide, \
File "/usr/local/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1, in <module>
from ChannelSelection import ChannelSelection, BouquetSelector
File "/usr/local/lib/enigma2/python/Screens/ChannelSelection.py", line 10, in <module>
from EpgSelection import EPGSelection
File "/usr/local/lib/enigma2/python/Screens/EpgSelection.py", line 8, in <module>
from Screens.TimerEdit import TimerSanityConflict
File "/usr/local/lib/enigma2/python/Screens/TimerEdit.py", line 6, in <module>
from Components.TimerSanityCheck import TimerSanityCheck
File "/usr/local/lib/enigma2/python/Components/TimerSanityCheck.py", line 4, in <module>
from Components.NimManager import nimmanager
File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 1043, in <module>
nimmanager = NimManager()
File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 623, in __init__
InitNimManager(self) #init config stuff
File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 1041, in InitNimManager
nimmgr.sec = SecConfigure(nimmgr)
File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 394, in __init__
self.update()
File "/usr/local/lib/enigma2/python/Components/NimManager.py", line 127, in update
eDVBResourceManager.getInstance().setFrontendSlotInformations(used_nim_slots)
StandardError: eDVBResourceManager::setFrontendSlotInformations list size incorrect 4 frontends avail, but 0 entries in slotlist
=>exitTvui()
---- saving lame channel db [/local/etc/enigma2/lamedb]
saved 156 channels and 2945 services!
release cached channel (timer timeout)
[EPGC] 0 events written to /hdd/epg.dat
set RTC to previous valid time
+ (30) eActionMap
+ (1) Background File Eraser
+ (20) RC Input layer
+ (21) input device driver
+ (21) Console RC Driver
+ (20) AVSwitch Driver
+ (20) UHF Modulator
+ (20) misc options
+ (21) LIRC RC Driver
+ (35) CI Slots
+ (20) DVB-CI UI
+ (10) gRC
+ (9) Font Render Class
+ (9) GFBDC
+ (9) gLCDDC
+ (8) graphics acceleration manager
+ (15) eWindowStyleManager
+ (40) eServiceCenter
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (41) eServiceFactoryFS
- (40) eServiceCenter
clear instance
- (35) CI Slots
- (30) eActionMap
- (21) input device driver
- (21) Console RC Driver
- (21) LIRC RC Driver
- (20) RC Input layer
- (20) AVSwitch Driver
- (20) UHF Modulator
- (20) misc options
- (20) DVB-CI UI
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
KILLED BY signal 11
-------
Segmentation faultSegmentation fault at the end
