can anyone help me set this rubbish box up I was told to buy
help setting up
- damo2012
- Thread is marked as Resolved.
-
-
they are not a popular receiver m8
but take a read around here will help -> http://linuxsat-support.com/forumdisplay.php?f=545& i believe you have to patch the receiver first..
before it will let you access the Cccam and Newcamd menu which is generally via the Red Button -
thanks ive sorted that problem out now but when I put the channel list on there is no signal is the tunner **** in this box
-
id do a factory reset,
then setup your Tuner configs - rescan - & then when done re-add your channels list? -
Once you put in the channel list you will need to go to the settings page and if a single sat setup then select the satellite, if using a motor via diceq then input your position.
The tuners used in these receivers are very good.
-
they are not a popular receiver m8
but take a read around here will help -> http://linuxsat-support.com/forumdisplay.php?f=545& i believe you have to patch the receiver first..
before it will let you access the Cccam and Newcamd menu which is generally via the Red Button... and where do i get the patching instruction please?
do i have to be a rocket scientist for make it happen?thanks
-
there is not a lot of members using these receivers m8,
a rocket scientists degree not needed but you will have to do some homework & reading around ok. -
master G
Moved the thread from forum DR HD Support to forum DR.HD.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!