hi can someone help me how to installation in internal flash or in multiboot sunray4se hd can I use falshwizard 6.3
To add an image you need to put the box in boot mode by holding the mini flash button down on the rear and then powering on the box at the rear keeping your finger on the mini flash until you see the boot menu on the front with the i.p address.
Now put the dreambox / sunray i.p address into your browser (1) on a wireless laptop or a p.c connected to the router that the box is connected to and press enter. You should now bring up the boxes web interface.
a210ed5b3f49.jpg
- (2.) on the bottom of the page, there's a link called "firmware upgrade". Click it.
0bdc678fec309d6.jpg
- On the next page, you can select the flash image you want to flash. Be sure that it has the ".nfi" extension and that it is for dm800se clones (patched images are probably best as they have all the drivers etc installed).
You can't flash other images (like .img)!
- Click on "FLASH!" and wait. It might take some time to upload and flash the image.
- tick reboot or Switch the box off and on again. The new image should be flashed and working.
Flashwizard only supports Enigma 1 images and boxes. You would need to use Barry Allen or Meoboot on your DM800.
Nano
The first thing to do is to install image in flash
Don’t have an account yet? Register yourself now and be a part of our community!
