Nbox 5800sx wont boot

There are 4 replies in this Thread which was already clicked 2,123 times. The last Post () by bloto22.

    my nieces boyfriend has the Nbox 5800sx with Hyperion 3 loaded into Nand and was running Hyperion 3 from USB. He flashed another image, Hyperion 4, onto a USB partition but when he booted up it went into a boot loop of an E2 error when it has loaded the Hyperion image. He is stuck now because it will not boot into nand either. He has the new duo boot on it so he is stuck and would appreciate input people? He has chosen n-Hyperion but it loads the logo and then shows an E2 error. He chooses USH1 but it wont work!! Is there a way around this? :29_002:

    boot nbox from backup uboot for example A19.


    reflash default a20 uboot.


    turn off, put link on a20 again. power box.


    DO NOT TRY TO REFLASH UBOOT FROM A20. YOU MUST USE SPARE UBOOT TO START THE BOX AND REFLASH DEFAULT ONE.


    well done.

    Not sure how to do that and the box is 100 miles away so a bit difficult to do!! He says he has all the options so I assume he can boot and when he tries to load from USB it gets tyo Hyperion image then it shows E2 error so its a bad flash to USB, but he doesnt knwo how to get into Nand memory!!

    ask him to send you back or to someone who knows what is doing, to boot hyperion images you will need a diffrent ENV loaded in bootloader to boot them proply.....



    IF he dont know how to enter b4t bootloader menu, he cant flash any image .... can he?? ;)

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login