alright guys ive downloaded a new version of pkt hyperion v4 and selected oscam scanned in all channels and internet connection ok but its blank when i open keys in dcc centre so basicly i cant configure my settings to view encrypted channels, i have a different receiver and all works well so i know my line is working , is there a way to do this thanks
oscam blank
- karl75
- Thread is marked as Resolved.
-
-
you need to put oscam.conf, oscam.server and oscam.user in /var/keys
-
ive done that mate but still nothing clearing has me head melted should of left my previous image on this has me puzzled, should a new file list be part of new image as in oscam.conf,user,server,servid ive tried a few images but im still getting same problem and i have everything setup 100% oscam just seems to not want to connect
-
Good lesson learned buddy, Always backup your working configs before flashing a new image.. Use the attached basic dvbapi configs.. Add your line to oscam.server..
-
thanks pal il give it a bash and will take advice on board
-
hi masterg ive put them files in var/keys, oscam.server was blank so this is the way ive done out the settings but still im getting black screen and no ecm info in emu manager
[reader]
label = newcamd-reader
enable = 1
protocol = newcamd
device = N: 0000.servebeer.com ,XXXX
key = 0102030405060708091011121314
user = XXXX
password = XXX
fallback = 1
group = 3 -
right i found this in oscam cardserver log
2014/04/26 19:17:06 51AE18 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/04/26 19:17:07 51AE18 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decodingwhat would have to be done to correct this thanks
-
I am following this with interest, as I have been messing about with oscam for over a fortnightl now. Had some serious help from a couple of gentlemen in here, but still getting similar results to you. A right royal pain in the btm. Regards.
-
ive had oscam working in previous image but i was fiddling with the software update on it and after it updated i couldnt get nline channels to clear thats why i downloaded a new image but still no nearer to back working again ive tried a good few oscams but nought work
-
please show us your 3 files details
-
I hope that wasn`t a real password & port you just posted buddy..
Quotedevice = N: 0000.servebeer.com ,XXXX
You don`t add N: in this parameter.. Should be device = hostname,port
Use CCcam to oscam converter to convert the N line to a [reader]..
-
oscam.conf
global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1[dvbapi]
enabled = 1
user = linuxsatsupport
boxtype = duckbox
au = 1[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httprefresh = 15
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255[monitor]
appendchaninfo = 1oscam.server
[reader]
label = newcamd-reader
enable = 1
protocol = newcamd
device = N: 0000.se000000.com ,500
key = 0102030405060708091011121314
user = karl75-0000
password = 000000
group = 3oscam.user
[account]
user = linuxsatsupport
group = 1
caid = 0963
ident = 0963:000000
au = ***UKfallback = 1
-
no i blanked them out master g right converted with converter and still no joy heres what its like now with the main codes blanked out
[reader]
label=u000.000000000.com
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=uk00.ooooooooor.com,0000
user=ka000-0000
password=000000
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive= -
Login to oscam webinterface and check if the [reader] is connected.. What errors do you have in the log ?
-
2014/04/26 20:25:56 1850 296BF000 s can't open file "/var/keys//oscam.srvid" (err=2), no service-id's loaded
2014/04/26 20:25:56 1850 296BF000 s can't open file "/var/keys//oscam.tiers" (err=2), no tier-id's loaded
2014/04/26 20:25:56 1850 296BF000 s can't open file "/var/keys//oscam.provid" (err=2), no provids's loaded
2014/04/26 20:25:56 1850 296BF000 s can't open file "/var/keys//oscam.ird" (errno=2) i***** guessing not loaded
2014/04/26 20:25:56 1850 296BF000 s can't open file "/var/keys//oscam.keys" softcam keys not loaded
2014/04it says newcamd disabled and looks like reader no data
Lock Reader Protocol EMM error
UK / G / S / UQ EMM written
UK / G / S / UQ EMM skipped
UK / G / S / UQ EMM blocked
UK / G / S / UQ Action
abcd.abcdefghir.com newcamd 0 / 0 / 0 / 0 0 / 0 / 0 / 0 0 / 0 / 0 / 0 0 / 0 / 0 / 0
New Reader Label: Protocol: mouse mp35 smartreader internal sc8in1 serial camd35 cs378x radegast newcamd newcamd524 cccam constcw mouse_test smargo -
ok ive got it to read now it shows who my share is but getting blank screen still nearly there though
prov line is showing 0x000000 could this be the problem
Spark STI 7162 Support
Support for Amiko Alien 2, Delta, Dynavision 7162, Galaxy Innovations Avatar 2, Galaxy Innovations Avatar 3, Golden Media Spark Triplex, Golden Media Spark One, Icecrypt S3700 CHD, SAB Unix Triple HD, Samsat Linux 2, Satcom 7162, Sogno Spark Triple, Startrack SRT 2020 HD Plus, Superbox Z500, Truman TOP-BOX, Truman TopBox 2 Tuner, Visionnet Falcon, Spark STI 7162 Receivers.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!