hi Inspiral and everybody my box is dm800se.
noca problem
- LINUXLEARNER
- Closed
- Thread is marked as Resolved.
There are 25 replies in this Thread which was already clicked 2,494 times. The last Post () by LINUXLEARNER.
-
-
-
yap mate i have tried this method before but don't work.
-
also if you see my earlier post i am getting this error any clue mate 922b769f402a5f6.jpg
-
when switching on whilst holding rear miniflash button m8? do you get IP in LED display?
-
yes i do mate
-
i always use IE browser at this point to flash image m8
which image was installed b4 this noCAerror -
ts image what i did was i updates the image through dm itself
-
ok m8... what version bootloader did that image have?
-
i never checked it mate
-
ok b4 we try nxt step... what sim type is the receiver?
-
it sats v3.0 on it
-
-
yes mate you are right
-
ok so we are running Estar
follow this guide i just found m8, hopefully it will help??
QuoteThis tutorial will tell you how to rescue the box.
1. Download estar-DreamUP1337 and cp2012 driver from estar website,setup the driver.
2. Connect minuUSB to your PC,connect ethernet port to internet (DHCP).
3. Open estar-DreamUP1337,setup correct com port,don’t seclect Use Network,click connect then power-on
4. Click Disconnect button ,find box’s IP on OLED,select Use Network and setup correct IP,then power-off.
5. Click connect button and power-on,now you can flash correct estar imageif still no joy the tools in satdreamgr toolbox should fix ?
make sure you select the Dm800se Estar options m8 -
you mean in satdreamgr no ca found or different tool
-
If that guide don't help m8?
Satdreamgr toolbox should fix this
Use it firstly if likes? Ensure you select dm800se estar ok -
this up i get now
b3b6d0d3e53edfa695c9e5.jpg -
com port 17
is this correct m8? -
yes mate thats rite
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!