Gamma card, ubuntu, Cccam2.2.1 & Smargo configs

Hi,
I have setup Ubuntu 11.04 Desktop. I have followed the instructions and have setup CCcam 2.2.1. I have a smargo reader. I can see it as a /dev/ttyUSB0 I'm trying to use the CCcam via the smargo with a gamma card, and I can see in the CCcam log, that the card is recognized as Irdeto and then error: Here is the log

00:26:28.132 CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
00:26:28.421 CCcam: irdeto card found
00:26:29.112 CCcam: card added to broker with caid xxx
00:26:33.255 CCcam: login from xxxxxxxxxxxx
00:26:33.257 CCcam: user xxxx login attempt from xxxxxxxxxxx
00:26:33.259 CCcam: client xxxxxxxxxxxxxxxxxxxxxxxx, running CCcam 2.1.4
00:26:47.645 CCcam: local emm -> card /dev/ttyUSB0 0xXXX(0x000)
00:26:49.238 CCcam: local emm <- card /dev/ttyUSB0 error
00:26:49.238 CCcam: client xxxx emm 0xXXX(0x0) ok: 0 (took 1.593 seconds)
00:26:50.884 CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
00:26:51.173 CCcam: irdeto card found
00:26:51.864 CCcam: card added to broker with caid xxx

In other words, the card disconnects and connects again. I have tried using the smargo on DM800 with CCcam 2.1.4 but there also the card disconnects and connects again.
Is there a compatibility issue between the smargo and the gamma card. Has anyone success on using this reader with this card? What is the problem actually?

Quote from cdr

try this to be put on CCcam config with CCcam221 or CCcam213 should work

SERIAL READER : /dev/ttyUSB0 Smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000

All this is already present in my CCCam.cfg file. I have tried only with CCCam 2.2.1. Should I try with 2.1.3?

I will give a try tonight and let you know

Quote from master G

Seen this config on a few differant forums, try it and let us know how you get on.

SERIAL READER : /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
CAMKEY : /dev/ttyUSB0 00 00 00 00 00 00 00 00
CAMDATA : /dev/ttyUSB0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/ttyUSB0
B : /dev/ttyUSB0 06
SHOW TIMING : yes

Display More

I have tried all of the above settings exactly as they are written. The final result is again negative, the card returns an error. Here is the log:

18:43:41.578 CCcam: ======================================================================
18:43:41.578 CCcam: starting CCcam 2.2.1 compiled on Nov 21 2010@02:35:58
18:43:41.578 CCcam: ======================================================================
18:43:41.579 CCcam: online using nodeId xxxxxxxxxxx
18:43:41.582 CCcam: create 1 cam device(s)
18:43:42.452 CCcam: card detect fail
18:43:42.482 CCcam: added 650 keys from /var/keys/SoftCam.Key
18:43:42.486 CCcam: added 463 keys from /var/keys/AutoRoll.Key
18:43:42.486 CCcam: static cw not found or bad
18:43:42.487 CCcam: parsed 0 entries from /var/etc/CCcam.prio
18:43:42.492 CCcam: added 803 provider names from /var/etc/CCcam.providers
18:43:43.112 CCcam: added 11706 channel names from /var/etc/CCcam.channelinfo
18:43:43.113 CCcam: server started on port 12000
18:43:43.144 CCcam: card detect fail
18:43:44.819 CCcam: login from 192.168.x.xx
18:43:44.821 CCcam: user Manq login attempt from 192.168.x.xx
18:43:44.822 CCcam: client xxxx, running CCcam 2.1.4
18:43:44.876 CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
18:43:45.165 CCcam: irdeto card found
18:43:45.848 CCcam: card added to broker with caid 604
18:44:23.165 CCcam: local emm -> card /dev/ttyUSB0 0x604(0x000)
18:44:24.757 CCcam: local emm <- card /dev/ttyUSB0 error
18:44:24.758 CCcam: client xxxx emm 0x604(0x0) ok: 0 (took 1.593 seconds)
18:44:25.656 CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
18:44:25.945 CCcam: irdeto card found
18:44:26.628 CCcam: card added to broker with caid 604
18:44:32.756 CCcam: local emm -> card /dev/ttyUSB0 0x604(0x000)
18:44:34.349 CCcam: local emm <- card /dev/ttyUSB0 error
18:44:34.350 CCcam: client xxxx emm 0x604(0x0) ok: 0 (took 1.593 seconds)
18:44:35.372 CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
18:44:35.661 CCcam: irdeto card found
18:44:36.344 CCcam: card added to broker with caid 604

Should I try with 2.1.3 or 2.1.4 of CCCam. Is there a problem with my version of CCCam?
As for the settings of the Smargo, they are:

Mode = Autoswitch
Kernel = pc
T-mode = 0
GT = 0

If I set the Kernel to Dreambox, the error from the CCCam is "Card detect fail".
I have tried the smargo reader in DM800, I have changed the Kernel to Dreambox, and the card gets reset also there. But the card works without any issues in the internal card reader (/dev/sci0). What is wrong here?

Anser for the cdr user: Also my gamma in the internal reader of DM800 works without problems, but not in the smargo reader.

P.S. On the dream I'm using 2.1.4 CCCam and the card resets in the smargo.

Quote from cdr

you should try CCcam213 as i said above on my post the config i did give you where working ok with 213 and gamma nova so i don't see any reason why will not work for you M8

I tried with CCCam 2.1.3 and again the card resets. Hers is the log again:

root@caserver:/usr/local/bin# ./CCcam2.1.3.x86 -d
11:49:44.041 CCcam: ======================================================================
11:49:44.042 CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:48:18
11:49:44.042 CCcam: ======================================================================
11:49:44.042 CCcam: online using nodeId xxxxxxxx
11:49:44.045 CCcam: create 1 cam device(s)
11:49:44.375 CCcam: card detect fail
11:49:44.406 CCcam: added 650 keys from /var/keys/SoftCam.Key
11:49:44.411 CCcam: added 463 keys from /var/keys/AutoRoll.Key
11:49:44.411 CCcam: static cw not found or bad
11:49:44.411 CCcam: parsed 0 entries from /var/etc/CCcam.prio
11:49:44.416 CCcam: added 803 provider names from /var/etc/CCcam.providers
11:49:44.908 CCcam: card detect fail
11:49:44.975 CCcam: added 11706 channel names from /var/etc/CCcam.channelinfo
11:49:44.975 CCcam: server started on port 12000
11:49:46.640 CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
11:49:46.928 CCcam: irdeto card found
11:49:47.612 CCcam: card added to broker with caid 604
11:49:49.042 CCcam: login from 192.168.xx.xx
11:49:49.048 CCcam: user xxxx login attempt from 192.168.xx.xx
11:49:49.050 CCcam: client xxxxx, running CCcam 2.1.4
11:50:02.983 CCcam: local emm -> card /dev/ttyUSB0 0x604(0x000)
11:50:04.577 CCcam: local emm <- card /dev/ttyUSB0 error
11:50:04.577 CCcam: client xxxx emm 0x604(0x0) ok: 0 (took 1.5947 seconds)
11:50:05.376 CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
11:50:05.664 CCcam: irdeto card found
11:50:06.348 CCcam: card added to broker with caid 604
11:50:12.703 CCcam: local emm -> card /dev/ttyUSB0 0x604(0x000)
11:50:14.297 CCcam: local emm <- card /dev/ttyUSB0 error
11:50:14.297 CCcam: client xxxx emm 0x604(0x0) ok: 0 (took 1.5945 seconds)
11:50:15.092 CCcam: /dev/ttyUSB0 configured clock frequency: 6000000 Hz
11:50:15.380 CCcam: irdeto card found

I have a question for you cdr. Have you used gamma card with a smargo reader? I have an assumption that gamma is not working with smargo.

Hi cdr,
Thank you for the effort and your answers. I do also confirm that gamma works in DM800 internal reader, but looks like can not work with smargo :). Anyway your friend helped me a lot, to stop trying make smargo + gamma :)
Anyway if master G has other suggestion I will be glad to hear them.
regards