How to install LCD4Linux picons on BlackHole image

1) Start LCD4Linux plugin..

2) Press Blue button to scroll through the different settings until you get to LCD4Linux Display-Mode On > Scroll down to Picon path and press OK..

c0a24245.jpg

3) Navigate through the directory list so it is set as /media/usb/picon/, press Green to select..

9b7b14ce75aae22d7d9631b1.jpg

4) Press Green to Save..

5) Start LCD4Linux plugin again > Press Restart Displays/Yellow button..

How do you have the picons on the USB ? Are picons working on the infobar or anywhere else on the image ? Which image are you using ? Are mountpoints setup for the USB ?

There must be a folder named picon with the picon images inside of it.

Quote from rotty

No they dont work on info bar either.
What are mountpoints

The mountpoint is the directory where you have the USB setup to, example /media/usb or /media/hdd..

Which image are you using buddy ?

Quote from rotty

Where do i go to set this up

Third time lucky, Which image are you using buddy ?

Quote from rotty

I posted it earlier im on black hole the latest one

Sorry, didn`t notice that you had edited your thread. Press Blue button X2 > Device manager > Mountpoints > Setup USB as /media/usb > Save..

Quote from rotty

No still not there. I get /usr/share/enigma2/picon/. Thats it

Put the picon folder in /usr/share/enigma2/ and reboot..

You can also edit the LCD4Linux config in your browser like so; (192.168.1.92 to your own duo2`s ip address)

http://192.168.1.92/lcd4linux/config/

afead249bd376ac.png

Copy the same config as is in the image above then click 49001a956322c69af4f.png in the top right corner of the screen.. Restart the LCD4Linux display..

Quote from rotty

Thanks I got it to work but they are coming off harddrive now instead of USB .

HDD is not recommended because it takes time for the hard drive to spin up before the picon image appears, whereas internal flash (/usr/share/enigma2) or USB (/media/usb/) is instant..