I want to try to make readers to topaz tv
and this config my readers
reader]
label = topaz tv
protocol = mouse
device = / dev / ttyUSB0
services = topaz tv
caid = 4A02
detect = cd
ident = 4A02: 000000
group = 1
emmcache = 1,3,2
but occurs card system not supported and Error activating card
as below:
2014/07/22 20:17:55 93C7AD0 r topas_tv [mouse] creating thread for device /dev/ttyUSB0
2014/07/22 20:17:55 9430E88 r topas_tv [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/07/22 20:17:56 9430E88 r topas_tv [mouse] card detected
2014/07/22 20:17:57 9430E88 r topas_tv [mouse] ATR: 3B 6C 00 00 4E 54 49 43 33 F1 72 04 4A 03 00 00
2014/07/22 20:17:57 9430E88 r topas_tv [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
2014/07/22 20:17:57 9430E88 r topas_tv [mouse] Setting baudrate to 9600 bps
2014/07/22 20:17:57 9430E88 r topas_tv [mouse] Calculated work ETU is 104.20 us
2014/07/22 20:17:57 9430E88 r topas_tv [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)
2014/07/22 20:17:58 9430E88 r topas_tv [mouse] Tongfang card detected
2014/07/22 20:17:58 9430E88 r topas_tv [mouse] card system not supported
2014/07/22 20:17:58 9430E88 r topas_tv [mouse] Normal mode failed, reverting to Deprecated Mode
2014/07/22 20:18:01 9430E88 r topas_tv [mouse] ATR: 23 C9 FF FF 8D D5 6D 3D 33 70 B1 DF AD 3F FF FF F7 6A 60 D3
2014/07/22 20:18:01 9430E88 r topas_tv [mouse] ERROR: Could not read reader->convention
2014/07/22 20:18:01 9430E88 r topas_tv [mouse] Error activating card.
2014/07/22 20:18:02 9430E88 r topas_tv [mouse] ATR: 6C 00
2014/07/22 20:18:02 9430E88 r topas_tv [mouse] ERROR: Could not read reader->convention
2014/07/22 20:18:02 9430E88 r topas_tv [mouse] Error activating card.
2014/07/22 20:18:04 9430E88 r topas_tv [mouse] ATR: 6C 00
2014/07/22 20:18:04 9430E88 r topas_tv [mouse] ERROR: Could not read reader->convention
2014/07/22 20:18:04 9430E88 r topas_tv [mouse] Error activating card.
2014/07/22 20:18:05 9430E88 r topas_tv [mouse] card initializing error
and I see no settings for a specific Reader tonfang
please help me, because I still do not understand much about the server cardsahring
thank you very much
NB : I use OSCAM 1.20-unstable_svn build r8916 x32 bit and smartreader by Agrolis :D
