L53 Openbox S9 Multi-Satellite Channel List v3.00 - released on [14 January 2011]
This channel list is best used with either the latest official Firmware or with the latest L53_MOD_Dump file.
This is a multi-satellite channel list covering satellites from 30west to 45east.
It can also be used as a single satellite channel list, just click on the Zoom or SatList button and select the satellite you wish access from the satellite list.
Default Settings:
Default Motor Setting: DisEqC 1.2.
Default LNB Setting: Universal [9750 - 10600]
---------------------------------------------------------------------------
What's New:
Channel list format changed to [.dbs]
A number of new or updated channel added on all satellites.
---------------------------------------------------------------------------
Installation Instructions:
To avoid any possable conflicts, it is always wise to delete the channels from your receiver before installing.
To remove all channels click Menu -> Edit Channel -> Delete All
To install this channel list, simply transfer the unzipped channel list to a USB Stick, and then insert the USB Stick into the USB port, which is located on the rear of the receiver, then follow the instructions below.
Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Misc Files' then click on 'Select & Upgrade' and select OPTION 1 [TP_PROG] now click the OK button, when you see a check mark or tick next to the TP_PROG, click the yellow button to install.
Once the file have been installed, reboot the receiver, once rebooted you can then click the Zoom or SatList button, and directly select any satellite from within the satellite data base list.
---------------------------------------------------------------------------
L53_S9_multi_channel_list_v3.00.zip
