L53 Openbox S9 Multi-Satellite Channel List v3.80 [10 March 2011]

    • Official Post

    L53 Openbox S9 Multi-Satellite Channel List v3.80 [10 March 2011]


    This channel list is best used with either the latest official Firmware, or with the latest L53_MOD_Dump file.


    General Info:
    This is a multi-satellite channel list covering satellites from 30west to 45east.
    It can also be used as a single satellite channel list, just click on the Zoom or SatList button and select the satellite you wish access from the satellite list.


    Default Settings:
    Channel list format: .dbs
    Default Motor Setting: DisEqC 1.2.
    Default LNB Setting: Universal [9750 - 10600]
    Radio Channels: 0
    Favorite Channels: 0


    If used in an external channel editor, change extension from .dbs to .abs
    once you have edited the channel list, change the extension back to .dbs
    ---------------------------------------------------------------------------


    What's New:
    ALL satellites 30w to 45e updated.


    I have also decided to included the replace.list and constant.list in all future releases, only for those that may require them.
    Of course if you already have them installed, then simply ignore them.
    ---------------------------------------------------------------------------


    Please Note:
    To avoid any possable conflicts, it is always wise to delete all channels from your receiver, before installing a new list. if you do not then you could possably encounter problems.

    To remove all channels click Menu -> Edit Channel -> Delete All


    To install this channel list, simply transfer the unzipped channel list to a USB Stick, and then insert the USB Stick into the USB port, which is located on the rear of the receiver, then follow the instructions below.


    Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Misc Files'
    then click on 'Select & Upgrade' and select OPTION 1 [TP_PROG] now click the OK button,
    when you see a check mark or tick next to the TP_PROG, click the yellow button to install.


    Once the file have been installed, reboot the receiver, once rebooted you can then click the Zoom or SatList button, and directly select any satellite from within the satellite data base list.


    L53_S9_multi_channel_list_v3.80.zip

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!