There are 19 replies in this Thread which was already clicked 47,109 times. The last Post () by Sagar bhaliya.
Dreambox OptiFlasher v1.0.1 New Updates
Update Features:
-Added Read User Data / Settings Backup
-Added Write User Data / Restore Settings Backup
-Software Interface Rebuilded
PS: Use Backup & Restore of "User Data / Restore Settings Backup" Only with same image release version
Dreambox OptiFlasher Enigma2 EDition [DM800/DM800SE]
Version 1.0.3
Main Features:
-Performing IMAGE Writing Operation [NFI]
-Performing IMAGE Backup Restore [NFI]
-Performing Boot Loader Writing/Update Operation [NFI]
-Performing Manual/Auto Reboot
Best regards , yassinov
Update Features:
-Added DM8000 For [Normal Mode]
-Added RS232 Serial Interface Comunication
-Added RS232 Serial Interface Port Detection
-Added Embedded Flash Loader For 2nd Stage work
-Added Performing IMAGE Writing Operation [NFI] Bypassing 2nd Stage [Advanced Mode] + Flashing On [Normal Mode] (This features used for users that
have problems to comunicate with Network or that have Error on DM Lcd).
-Added Performing Bootloader Writing/Update Operation [NFI] Bypassing 2nd Stage [Advanced Mode] + Flashing On [Normal Mode] (This features used for users that have problems to comunicate with Network or that have Error on DM Lcd).
-Added [NO CA FOUND] Repair Option with Embedded bootloaders selection
Definitions :
Normal Mode : This mode for All features under ***STOP*** Mode with network connection only !
Advanced Mode: This mode for All features under RS232 serial comunication type + network connection after 2nd Stage & Supporting For now DM800 Original/Clone ! [Other models will be added soon] !
Main Features:
-Performing IMAGE Writing Operation [NFI]
-Performing IMAGE Backup Restore [NFI] [not ready yet]
-Performing Boot Loader Writing/Update Operation [NFI]
-Performing Manual/Auto Reboot
-Performing [Repair NO CA FOUND] & Other Errors
Dreambox OptiFlasher v1.0.5 Enigma2 EDition
Update Features:
-Added DM800se Support For [Advanced Mode 1/2]
-Added DM8000 Support For [Advanced Mode 1]
-Added DM800 Write Bootloader [Advanced Mode 1/2]
-Added DM800se Write Bootloader [Advanced Mode 1/2]
-Added DM800 Write Image / Recovery [Advanced Mode 2]
-Added DM800se Write Image / Recovery [Advanced Mode 2]
-Added Recovey Mode For DM800/DM800se
-Added Recovey Images For DM800/DM800se [Auto Download From Server]
-Added Comunication Setup Option:
[RS232/USB & Lan ] Mode And [RS232/USB Uart Only] Mode
-Wrong / Invalid Images & WRONG ARCHITECTURE Detection Optimized
Note : Advanced mode2 [Write Bootloader & Image Recovery] Support Only For SIM 2.01
Definitions :
Normal Mode : This mode for All features under ***STOP*** Mode with network connection only !
Advanced Mode1: This mode for All features under RS232 serial / USB Uart comunication type + network connection Lan after 2nd Stage & Supporting DM800/DM800se/DM8000 Original/Clone !
Advanced Mode2: This mode for All features under RS232 serial / USB Uart comunication Only & Supporting DM800/DM800se [SIM 2.01 Only]
Main Features:
-Performing IMAGE Writing Operation [NFI]
-Performing IMAGE Backup Restore [NFI] [not ready yet]
-Performing Boot Loader Writing/Update Operation [NFI]
-Performing Manual/Auto Reboot
-Performing [Repair NO CA FOUND] & Other Errors
-Performing Recovery
Best regards , yassinov
Dreambox OptiFlasher v1.0.6 Enigma2 EDition
Update Features:
-Added Read IMAGE Backup [Beta] DM800
-Added Read IMAGE Backup New Extension [.YAS]
-Added DM500-HD Support For [Normal Mode]
-Added DM800-SE New SSL84 [Advanced Mode1]
-Added DM800-SE New SSL84 [Advanced Mode2]
-Added DM800-SE Repair [NO CA FOUND] [Advanced Mode1]
-Added DM800-SE Repair [NO CA FOUND] [Advanced Mode2]
-Added Auto Switch ***STOP*** Mode & TV Mode Detection
-Added Backup Options/ Device Name Detection [Path Location USB/HDD]
-Software Interface Rebuilded
Thx yassinov
Dreambox OptiFlasher v1.0.7 Pro Enigma2 EDition Released
Major Update :
Update Features:
-Added CRC Algho Authorization [Now Possible make manual Flash For Any File in Advanced Mode] [HOT]
-Added Support For DM800 Genuine SSL84 under Advanced Mode
-Added OPKG/IPKG Local Installer
-Added Tunisiasat TSpanl Online Installer
-Added Auto Detection Model [Advanced Mode]
-Added Firmware Recovery Download & Flash From MultiUpload Links (NFI Format Link) [HOT]
-Added Turbo Flashing Mode For DM800HD-SE/SUN800HD-SE
-Added SIM2 SSL Secondstage Repair Pack
-Added DM800 SIM201 SSL84/84A Support
-Added New Software Loader For DM800 Genuine #84+ [LD2]
-Added Silicon Labs CP210x USB to UART Support With High Speed
-Added Donators Support Zone [Special Features will work Only If user have Registred Key]
-Added Fast Connect HotKey [CTRL+C Normal / Advanced Mode]
-Read Image Option Disabled Temporary For Rebuild
-Software Interface Rebuilded
Download Dreambox OptiFlasher Pro Enigma2 EDition v1.0.7
Best regards , yassinov
Dreambox OptiFlasher v1.0.8 Pro Enigma2 EDition Released
Major Update :
Update Features:
-Added Barry Allen Manager Hot [Registred OptiFlasher Key Required]
Supported Features :
-Install New Image
-Delete Image
-Rename Image
-Change Boot Image
-Barry Allen version Detection on Connect Mode
-Added BootLogo Builder Hot [Registred OptiFlasher Key Required]
Supported Features :
-JPEG 1280/720 supported type
-Add Custom text , Add Pro Color Selector , Add Pro Font Selector
-Vertical & Horizontal Bootlogo Text Control
-Auto Save ,Auto Convert MVI Logos , Auto Install For :
Bootlogo , Backdrop , Bootlogo_wait , Switchoff
To be added in Updates :
-Add Effects , Auto Fix JPEG Size , Auto Convert
-Added DM800SE SIM2 SSL#84A Support
-RS232/USB Flashing Optimized
-SSL-BT Updated [Download / Update]
-Software Interface Rebuilded
Download the SSL-BT Pack & Extract it then put SSL-BT folder at
same path of OptiFlasher
Download Dreambox OptiFlasher Pro Enigma2 EDition v1.0.8
Best regards , yassinov
DreamBox OptiFlasher Pro 1.0.9 Major Update !
Update Features:
-Added DM800-SE New SSL84B [Advanced Mode1/2] SIM2
-Added DM800-HD New SSL84B [Advanced Mode1/2] SIM2
-Added DM500-HD Support
-Added DM500-HD SSL84 [Advanced Mode1/2] SIM2
-Added DM500-HD SSL84B [Advanced Mode1/2] SIM2
-Added DM500-HD Repair [NO CA FOUND] [Advanced Mode1] SIM2
-Added DM500-HD Repair [NO CA FOUND] [Advanced Mode2] SIM2
-Added Sectors Recovery Loader [DM800SE/SIM2]
-Added Sectors Recovery Loader [DM800HD/SIM2]
-Added Sectors Recovery Loader [DM500HD/SIM2]
-Added Sectors Recovery Loader [DM800SE Genuine]
-Added Dreambox-Dvb-Modules / Dreambox-Secondstage on Main Detection
-Added Format /Repair & Auto Mount USB/HDD [EXT3 : SDA/SDB/SDC/SDD]
-Added Boot Option Selection For Internal Flash [BarryAllen Module]
-Added RC Device Auto Detect/Fix [BarryAllen Module]
-Added BarryAllen Dowloader/Installer SIM2
-Added BarryAllen Downgrader [Exp: From v6.2.7 to 6.0.7]
-Added BarryAllen Uninstaller
-Added Smart Drag/Drop File Image Flashing (*.nfi) [Internal Flash]
-Added Smart Drag/Drop File Image Flashing From Copressed Files "*.zip;*.rar;*.7z" [Internal Flash]
-Added Smart Drag/Drop File Image Flashing (*.nfi) [BarryAllen Module]
-Added Smart Drag/Drop File Image Flashing From Copressed Files "*.zip;*.rar;*.7z" [BarryAllen Module]
-Added Smart Drag/Drop File Plugin Install (*.ipk)
-Added Smart Drag/Drop File Plugin Install From Copressed Files "*.zip;*.rar;*.7z"
-Added Auto Detect Image Name Length [BarryAllen Module]
-Added Auto Detect Image Name Bad Characters Fix [BarryAllen Module]
-Added Spinner Builder/Installer [BootLogo Module] (OptiFlasher Key Required)
-Added Manual Reboot/Restart button Compatibility [Tv Mode / Flash Mode]
-Minor Bug Fixed in Internal/Extrenal Flashing Operation From [BarryAllen Module]
-Minor Bug Fixed in [NO CA FOUND] Module
-Minor Bug Fixed in Flashing [Auto Switch Mode] in Tv Mode
-Software Interface Rebuilded
Download the SSL-BT Pack & Extract it then put SSL-BT folder at same path of OptiFlasher
PS: Users with Registered OptiFlasher Keys Can Work with OptiFlasher v1.0.9 Pro by moving new Exe inside OptiFlasher V1.0.8 Folder that already registered !
Non-Registered / New Users Can also Obtain OptiFlasher Key From Here :
As Surprises Never End ! Some Hot Surprises Coming SoON on Next Update!
Be Ready & Expect The Unexpected
Dreambox OptiFlasher v1.0.9b Pro Enigma2 EDition
Major Update :
Update Features:
-Added Read IMAGE Backup DM800/DM800SE/DM500HD SIM2
-Added Read IMAGE Backup DM800/DM800SE/DM500HD Genuine
-Added DM800-SE New SSL84B [Advanced Mode1/2] SIM2
-Added DM800-HD New SSL84B [Advanced Mode1/2] SIM2
-Added DM500-HD Full Support SIM2
-Added DM500-HD SSL84 [Advanced Mode1/2] SIM2
-Added DM500-HD SSL84B [Advanced Mode1/2] SIM2
-Added DM500-HD Repair [NO CA FOUND] [Advanced Mode1] SIM2
-Added DM500-HD Repair [NO CA FOUND] [Advanced Mode2] SIM2
-Added Sectors Recovery Loader [DM800SE/SIM2]
-Added Sectors Recovery Loader [DM800HD/SIM2]
-Added Sectors Recovery Loader [DM500HD/SIM2]
-Added Sectors Recovery Loader [DM800SE Genuine] (OptiFlasher Key Required)
-Added New Loader For DM800SE Genuine LD3 (OptiFlasher Key Required)
-Added Dreambox-Dvb-Modules / Dreambox-Secondstage on Main Detection
-Added Format /Repair & Auto Mount USB/HDD [EXT3 : SDA/SDB/SDC/SDD]
-Added Boot Option Selection For Internal Flash [BarryAllen Module]
-Added RC Device Auto Detect/Fix [BarryAllen Module]
-Added BarryAllen Dowloader/Installer SIM2
-Added BarryAllen Downgrader [Exp: From v6.2.7 to 6.0.7]
-Added BarryAllen Uninstaller
-Added Smart Drag/Drop File Image Flashing (*.nfi) [Internal Flash]
-Added Smart Drag/Drop File Image Flashing From Copressed File "*.zip;*.rar;*.7z" [Internal Flash]
-Added Smart Drag/Drop File Image Flashing (*.nfi) [BarryAllen Module]
-Added Smart Drag/Drop File Image Flashing From Copressed File "*.zip;*.rar;*.7z" [BarryAllen Module]
-Added Smart Drag/Drop File Plugin Install (*.ipk)
-Added Smart Drag/Drop File Plugin Install From Copressed File "*.zip;*.rar;*.7z"
-Added Auto Detect Image Name Length [BarryAllen Module]
-Added Auto Detect Image Name Bad Characters Fix [BarryAllen Module]
-Added Spinner Builder/Installer [BootLogo Module] (OptiFlasher Key Required)
-Added Manual Reboot button Compatibility [Tv Mode / Flash Mode]
-Minor Bug Fixed in Internal/Extrenal Flashing Operation From [BarryAllen Module]
-Minor Bug Fixed in [NO CA FOUND] Module
-Minor Bug Fixed in Flashing [Auto Switch Mode] in Tv Mode
-Software Interface Rebuilded
Download the SSL-BT Pack & Extract it then put SSL-BT folder at
same path of OptiFlasher
Definitions :
Normal Mode : This mode for All features under ***STOP*** Mode with network connection only !
Advanced Mode1: This mode for All features under RS232 serial / USB Uart comunication type + network connection Lan after 2nd Stage & Supporting DM800/DM800se/DM8000 Genuine/Clone !
Advanced Mode2: This mode for All features under RS232 serial / USB Uart comunication Only
Main Features:
-Performing IMAGE Writing Operation [NFI]
-Performing IMAGE Backup Restore
-Performing Boot Loader Writing/Update Operation [NFI]
-Performing Manual/Auto Reboot
-Performing [Repair NO CA FOUND] & Other Errors
-Performing Flash Sectors Recovery
-Performing External USB/HDD Flashing BarryAllen
-Performing IPKG/OPKG Package Install
-Performing Bootlogo /Spinners Building / Install
-Performing USB / HDD Format/Repair & Auto Mount
-Compatibility of work with Genuine/Clone Type
-High Speed Flashing mode For USB Devices
& more...
Dreambox OptiFlasher v2.0.0.2 Pro Enigma2 EDition Released
Update Features:
-Added OptiFlasher Picon Loader Full Service (HOT) :
Supported Tested models : DM800hd , DM800se , DM500hd
-Configure & Install/Update Picon
-Install Single Channel Picon Auto (By Server more than 18000 Picons) (Hot)
-Install Single Channel Picon Manual
-Install Picon Device Path with Diffrent Locations:
(/media/usb , /media/hdd , /usr/share/enigma2)
-Auto Configure & Install For Picon_Oled (Tested with DM800se)
-Added SSL-BT Auto Check & Dowload
-Added Custom Baudrate (Manual/Auto: 115200-57600)
-Added Software Auto Check Updates Notification System [Manual/Auto]
-Software Interface Rebuilded
PS: CIFS mode need run OptiFlasher as Admin with
Activated Windows Session Password
For TSFlashbackup use "enigma2-plugin-extensions-tsflashbackup_84b_mipsel" Get if from TSPanel easy !
enigma2-plugin-extensions-tsflashbackup_84.2_mipsel not yet ready & may get message not installed Soon will be added.
For Non-Registered OptiFlasher Key Users Download the SSL-BT Pack Manually & Extract it then
put SSL-BT folder at same path of OptiFlasher
Dreambox OptiFlasher v2.0.0.3 Pro Enigma2 EDition Released
Update Features:
-Added OptiFlasher Video Boot Activator / Builder
Video Boot Activator / Builder Features :
Installing:
-Default [Internal] Install
-media/hdd [External] Install HD Videos Large Sizes
-media/usb [External] Install HD Videos Large Sizes
-Disable Video Boot
-Allowed Extensions [*.mkv;*.mp4]
-Added Youtube Installer / Fix Feature
-Picon Online Installer Server1/2 Updated
-Packages Uninstaller Updated
-Bug Fixed with Software Auto Check Updates Notification System
related with Windows 7 Ultimate.
-Software Interface Rebuilded
PS: Video Boot Activator / Builder Working in standalone mode
For Registered Licences , Internet Connection Needed For Unregistered Licences.
Some Video Boot Files Can be Downloaded From Here:
[URL]http://www.yassinov.com/forum/showthread.php?tid=1268[/URL]PS: CIFS mode need run OptiFlasher as Admin with
Activated Windows Session Password
For TSFlashbackup use "enigma2-plugin-extensions-tsflashbackup_84b_mipsel" Get if from TSPanel easy !
enigma2-plugin-extensions-tsflashbackup_84.2_mipsel not yet ready & may get message not installed Soon will be added.
For Non-Registered OptiFlasher Key Users Download the SSL-BT Pack Manually & Extract it then
put SSL-BT folder at same path of OptiFlasher
Dreambox OptiFlasher v2.0.0.6 Pro Enigma2 EDition Released
Update Features:
-Added Telnet Client User/Developer interface
-Added Nand Flash Image Download Center [NFI-DC] Add-on Module
-NFI Extension Association With OptiFlasher Pro improved
-Added DM7020hd Genuine-SIM Smart Check NFI/Secondstage SSL84
-Added DM500hd-v2 Genuine-SIM Smart Check NFI/Secondstage SSL88
-Added DM800se-v2 Genuine-SIM Smart Check NFI/Secondstage SSL88
-TSPanel OE1.6/OE2.0 New Updates Added
-TSmedia OE1.6/OE2.0 New Updates Added
-Software interface rebuilded
PS: Video Boot Activator / Builder Working in standalone mode
For Registered Licences , Internet Connection Needed For Unregistered Licences.
PS:
*About NFI-DC Add-on Module any question related please ask it outside this section on the main software website !
*CIFS mode need run OptiFlasher as Admin with
Activated Windows Session Password.
*About NFI Extension Association With OptiFlasher Pro Need need run OptiFlasher as Admin For First Time !
Dreambox OptiFlasher Pro Ultimate EDition v2.0.0.9
OptiFlasher Pro Ultimate v2.0.0.9 New Release :
Upgrade Features :
------------------
-Added DM7020hd (Original) Support
-Added DM7020hd-v2 (Original) Support
-Added DM800se-V2 (Original) Support
-Added DM800se-V2 SIM2 Support
-Added DM800se-v2 [Advanced Mode1/2]
-Added DM7020hd [Advanced Mode1/2]
-Added DM7020hd-v2 [Advanced Mode1/2]
-Added SIM2 SSL84d Support
-Added DM800SEv2 New SSL88A [Advanced Mode1] SIM2
-Added DM800HD New SSL84D [Advanced Mode1/2] SIM2
-Added DM800SE New SSL84D [Advanced Mode1/2] SIM2
-Added DM500HD New SSL84D [Advanced Mode1/2] SIM2
-TSPanel Online Installer improved
-TSMedia Online Installer improved
-Added BarryAllen Online Installer-SIM2 v11.0.4.9
-Added Enigma2 Settings Installer (1 Click Work)
-Added Teledunet NileSat IPTV Installer / Updater [Adding Manual Channel Stream Url: 'HTTP/RTMP']
-Added IPTV Installer / Updater [Adding Manual Channel Stream Url: 'HTTP/RTMP']
-Added Enigma2 Skins Download Support
-Added TPM Check Removal
-Added Read IMAGE Backup (OptiFlash v1 Beta) [USB/HDD/CIFS] (No Plugins Install Required)
-OptiFlash Backup Support: DM800 , DM800se , DM500hd , DM800se-v2 , DM7020hd , DM7020hd-v2
-Added Auto Detect For USB to Uart Bridge with Port Number & Audio Notification
-Added Internal/External/ Multiboot Flashing Scenario
-Added OptiFlasher Nand Flash Image Download Center [NFIDC v2 More than 70GB of images For All Models +Updates] :
*Detection of Box & SSL in diffrent Modes [TvMode/RS232/USB]
*in case of the detected box is: [DM800hd or DM800se SIM2] then user will have choice of : DM800hd/SR3 or DM800se/SR4
*Retrieving the correct Images For your Box Before Download/Flash
*Safe Mode Flashing Notification
*Download Images From NFIDC [Nanad Flash Image Download Center]
*Auto Flash after Download [Auto/Manual
*Flashing After Download in [TvMode/RS232/USB]
-Software Interface Rebuilded
& more... to discover inside
All basic operations & SIM2 support are free !
somes features may need licence permission for full service .
1.Hola dónde puedo encontrar un manual para instalar este programa y poder Flash imagen en un DM800se simple Turner clone
vou ver se consigo O que outras pessoas estão dizendo
Bonjour les amis, où puis-je avoir le code d'activation de DreamBox-OptiFlasher ultimate Pro E2
if i use optfllesher no need upgrate or upgrade is must?
if i use optfllesher no need upgrate or upgrade is must?
Certain functions require an upgrade. If you don`t use those functions, don`t upgrade.
Try an older version (not pro) before you make a decision.
help mi send
Dreambox OptiFlasher E1v1.0.2
This tool send mi
Don’t have an account yet? Register yourself now and be a part of our community!
