[How-To] USB flash the Mut@nt HD2400

    • Official Post


    As the title, how to USB flash the Mut@nt HD2400.


    1) Download your chosen image and extract the hd2400 folder.
    2) Connect your USB stick to PC and format FAT32.
    3) Copy the hd2400 folder to root of your USB stick.
    4) Power off your HD2400.
    5) Unplug your USB stick from PC and connect to a USB port on your HD2400.
    6) Power on.
    7) When you see the message on the OLED saying 'Image Found', press UP arrow and wait for the HD2400 to flash.
    8) Once complete the HD2400 will automatically reboot.


    Do not power off whilst flashing.


    Thanks to Sicilian from W-O-S for the guide.

Your guide to Enigma2 image flashing and setup

Access tutorials for firmware installation, initial configuration, and essential first steps for your receiver. Flash and setup your Enigma2 receiver. Get detailed guides and community help for installing and configuring new system images.