Force local card for some channel / Check config

There are 11 replies in this Thread which was already clicked 3,530 times. The last Post () by codar.

    Hi,


    I have a card for TNTSAT, and CCCAM for CanalSat, unfortunately they use the same provider or caid , how can I force the free channels to use the real card ?
    Also, I have a lot of freeze, like every 2 minutes or less regarding the CCCAM Server, is that a another thing than CCCAM for receive ***UK / CanalSat?


    What did you thing about my oscam configuration, I know I use the same group for raiders, but when I use different work, nothing is working anymore.
    (Also I cannot connect to the HTTP server, when I enter my box IP I have my XBMC interface, and when I enter the oscam Port, the webpage won't load.


    Oscam.user


    [account]
    user = localuser
    group = 4
    monlevel = 1
    keepalive = 1
    au = 1


    [account]
    user = CCCAMUSER
    pwd = CCCAMPASSWORD
    group = 4
    monlevel = 1
    allowedprotocols = cccam
    cccmaxhops = 0
    keepalive = 1



    Oscam.server



    [reader]
    label = cardreader-tntsat
    protocol = internal
    device = /dev/sci0
    services = tntsat
    caid = 0500
    aeskeys = Here the key which only work with SD TNTSAT channels
    detect = cd
    mhz = 357
    cardmhz = 500
    group = 4
    lb_weight= 1000
    auprovid = 030B00, 032830


    [reader]
    label = remoteshare
    protocol = cccam
    device = 1sat.dyndns.tv,19920
    user = CCCAMUSER
    password =CCCAMPASSWORD
    inactivitytimeout = 30
    reconnecttimeout = 20
    cccmaxhops = 0
    ccckeepalive = 1
    audisabled = 1
    group = 4
    cccversion = 2.2.1
    auprovid = 3311,0000,000963



    OSCAM.Conf
    [global]
    logfile = /mnt/hdd0/program/tuxbox/config/oscam.log
    cachedelay = 120
    nice = -1


    [monitor]
    hideclient_to = 15
    appendchaninfo = 0


    [cccam]
    port = 19920
    reshare = 3
    version = 2.3.0


    [dvbapi]
    enabled = 1
    au = 1
    boxtype = dreambox
    user = localuser
    request_mode = 1


    [webif]
    httpport = 19920
    httpuser = CCCAMUSER
    httppwd = CCCAMPASWORD
    httpallowed = 127.0.0.1,192.168.1.1-192.168.1.254



    Many thanks

    Your oscam webif port and cccam port are identical and probably conflicting.
    You should change your webif port to something else for starters.
    It doesn't matter what you change it to if your only accessing the webif within your own network.
    also add this line to search real card first

    Quote

    OSCAM.Conf
    [global]
    logfile = /mnt/hdd0/program/tuxbox/config/oscam.log
    cachedelay = 120
    nice = -1
    preferlocalcards =1

    iBffBYU.png

    Edited once, last by codar ().

    Quote from codar

    Your oscam webif port and cccam port are identical and probably conflicting.
    You should change your webif port to something else for starters.
    It doesn't matter what you change it to if your only accessing the webif within your own network.


    Hi Codar ! Thank , that what I thought ! I will update that right now !

    Is it just one receiver your running?
    If so, you probably could get rid of this account

    I changed I have a webpage now but
    403 Forbidden


    Access denied.
    It don't even ask me to login.


    I only have one receiver, but if I get rid of that, I won't have access to my CCCAM server anymore no?

    You'll have to input your receiver's ip followed by the port number you changed it to.
    IE: 192.168.x.x:new port number


    Getting rid of the other account would still grant you access to your other share as it is setup as a remote card.
    It is a share, isn't it??

    iBffBYU.png

    Edited 2 times, last by codar ().

    Try changing webif to default port so :8888
    Just to see if it works.
    port 7777 may be used by something else.
    Also restart oscam or your receiver after changing configs as sometimes changes don't take effect until a restart


    - - - Updated - - -


    Are you sharing your card with your peer?
    If so, leave his account in place but I would change your cccam port entry and forward that changed port in your router also, as you both are using the same port. It could be causing oscam a bit of bother.
    You will have to inform him of the change as your local will stop working in his setup.
    This may be the reason why you are experiencing freezing, he could be aswell.
    If you are not sharing your card, just delete his account, You should still have access to his local.

    Great thank you !


    Which port you suggesting me to change ? The CCCAM on the oscar.congif ?


    - - - Updated - - -


    The only thing is that my real card (TNTSAT) is not working at all now


    oscam.user


    # oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9980
    # Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.user.txt


    [account]
    user = localuser
    monlevel = 1
    keepalive = 1
    au = 1
    group = 4


    Oscam.server


    # oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9980
    # Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt


    [reader]
    label = cardreader-tntsat
    description = TNTSAT
    protocol = internal
    device = /dev/sci0
    caid = 0500
    detect = cd
    cardmhz = 500
    aeskeys = KEY
    group = 4
    lb_weight = 1000
    auprovid = 030B00


    [reader]
    label = remoteshare
    protocol = cccam
    device = 1sat.dyndns.tv,19920
    user = CCCAMUSER
    password = CCCAMPASS
    inactivitytimeout = 30
    group = 4
    cccversion = 2.2.1
    cccmaxhops = 0
    ccckeepalive = 1
    audisabled = 1


    # oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9980
    # Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.conf.txt


    [global]
    logfile = /var/local/oscam.log
    nice = -1


    [cache]


    [cccam]
    port = 19920
    nodeid = 91C76F8F100C14A6
    version = 2.3.0
    reshare = -1


    [dvbapi]
    enabled = 1
    au = 1
    request_mode = 1
    user = localuser
    boxtype = dreambox


    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = kevin
    httpallowed = 127.0.0.1,192.168.3.1-192.168.3.254
    hideclient_to = 15

    Edited once, last by gatinho ().

    Probably need to see oscam log now.


    - - - Updated - - -


    Try these configs out.
    I don't have a tntsat card nor do i have a prismcube but (i think) the oscam config structure is the same as a mips receiver / pc server




    Quote

    oscam.service (edit to what you want your card to try and clear, below is one i found on the net)


    [tntsat]
    caid = 0500
    provid = 030B00
    srvid = 1903,2009,2010,2136,2200,2202,2206,2207,2208,2211, 2213,2214,2216,2289,2329,2337,2351,2458,2462,2472, 2476,2480,2486,2649,2650,2651,2652,2653,2654,4284, 4290,1FEB,25E5,25E6,25E7,25E8,25E9,1F41,1F44,1F45, 1F48,1F4A,1F55,1F56,1F57,1F58,1FD8,1FDF,20A4,20A5, 20AE,20AF,20B3,20B4,20B5,20B6,217C,21FD,221A,221B, 233D,234B,245E,246C,248A,25EA,25EB,25EC,25ED,25EE, 25EF,25F0,264A,264B,264C,264D,264E,264F,2F67,2F8A, 2F8E,6F73,6F86,6F87,21FF,189F,2025,2200,2202,2022


    I have also attached a dvbapi file for you to try.
    This thread here may also be of help: (Although a bit old)
    http://linuxsat-support.com/showthread.php?t=35533


    A look at your oscam log would be helpful though.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login