Want to setup a smargo card reader on my DM800, to run a tring card. Does anyone have any usefull tips for me I not sure what I need to put in my cccam configuration to get it to read a card.
Also should I update my firmware to the latest before I start.
Cheers
Jono
Just found this very useful thanks http://linuxsat-support.com/en…-smartreader-enigma2.html
Hi All,
I have really started to struggle now with this one, i have loaded latest genuine firmware from dreammultimedia with bootloader #84 then re flashed with the latest ICVS firmware dated 6/9/11 which cliams to have smargo supported.
Re loaded CCCAM 2.1.4 & OSCAM 1.00 via DCC and changed every thing to 755 including my cccam config.
I can read my sly card in the internal slot as i could before, but now when i connect the smargo to the DM800 and try my sly card in it or my tring card it does not work. The smargo has a green light on it when first connected and the words usb device (4) show on the screen when i insert a card the green light goes out.
not sure what this means.
Hopefully it will be something simple like i aint added the correct info in to my cccam.cfg or the fact i do not know what if any config is required for OSCAM.
thanks
Jono:ah:
I have done as you say but i still can not get the smargo to run my tring card.
I am really worried i have a faulty smargo because it shows green when connect with no card and as soon as a card is entered the green light goes out. does this look correct now in server
[reader]
label = Tring
Protocol = internal
detect = CDdevice = /dev/usb/tts/0 smartreader+
Group = 1
EMMCache = 1,3,2
PinCode = 1234
caid = 0BAA
ident = 0BAA:000000cheers for your help i really appriciate it
jono
label = Tring
enable = 1
protocol = internal
device = /dev/usb/tts/0 smartreader+
caid = 0baa
ident = 0BAA:000000
detect = cd
#mhz = 6
#cardmhz = 600
#Fallback = 0
group = 1
emmcache = 1,3,2
PinCode = 1234Post your oscam log or copy the info from webinfo so we can see if there are any errors.
is this it ?
2011/09/20 21:58:59 2C6114B0 c localuser (0B00&000000/03F3/6E:9E9F): rejected group (0 ms) (of 0 avail 0) - 0B00:03F3 unknown (no matching reader)
2011/09/20 21:59:00 2C6114B0 c dvbapi: try pids again #2
2011/09/20 21:59:00 2C6114B0 c localuser (0B00&000000/03F3/6E:9E9F): rejected group (0 ms) (of 0 avail 0) - 0B00:03F3 unknown (no matching reader)
2011/09/20 21:59:00 2C6114B0 c dvbapi: try pids again #3
2011/09/20 21:59:00 2C6114B0 c dvbapi: can't decode channel
2011/09/20 21:59:00 2C6114B0 c localuser (0B00&000000/03F3/6E:9E9F): rejected group (0 ms) (of 0 avail 0) - 0B00:03F3 unknown (no matching reader)
2011/09/20 21:59:10 2C6114B0 c dvbapi: [ADD PID 0] CAID: 0B00 ECM_PID: 1BC0 PROVID: 000000
2011/09/20 21:59:10 2C6114B0 c dvbapi: new program number: 0964 (0B00:0964 unknown)
2011/09/20 21:59:10 2C6114B0 c dvbapi: try pids again #1
2011/09/20 21:59:10 2C6114B0 c localuser (0B00&000000/0964/66:6D58): rejected group (0 ms) (of 0 avail 0) - 0B00:0964 unknown (no matching reader)
2011/09/20 21:59:10 2C6114B0 c dvbapi: try pids again #2
2011/09/20 21:59:10 2C6114B0 c localuser (0B00&000000/0964/66:6D58): rejected group (1 ms) (of 0 avail 0) - 0B00:0964 unknown (no matching reader)
2011/09/20 21:59:10 2C6114B0 c dvbapi: try pids again #3
2011/09/20 21:59:10 2C6114B0 c dvbapi: can't decode channel
2011/09/20 21:59:10 2C6114B0 c localuser (0B00&000000/0964/66:6D58): rejected group (1 ms) (of 0 avail 0) - 0B00:0964 unknown (no matching reader)
2011/09/20 21:59:46 2C6114B0 c >> OSCam << cardserver log switched, version 1.10rc-svn, build #5741 (mips-tuxbox-linux)
2011/09/20 21:59:46 2C6114B0 c version=1.10rc-svn, build #5741, system=mips-tuxbox-linux
2011/09/20 21:59:46 2C6114B0 c client max. idle=120 sec, debug level=0
2011/09/20 21:59:46 2C6114B0 c max. logsize=10 Kb, loghistorysize=4096 bytes
2011/09/20 21:59:46 2C6114B0 c client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/09/20 21:59:46 2C6114B0 c dvbapi: [ADD PID 0] CAID: 0BAA ECM_PID: 008D PROVID: 000000
2011/09/20 21:59:46 2C6114B0 c dvbapi: new program number: 0002 (0BAA:0002 unknown)
2011/09/20 21:59:46 2C6114B0 c dvbapi: try pids again #1
2011/09/20 21:59:46 2C6114B0 c localuser (0BAA&000000/0002/67:68F7): rejected group (0 ms) (of 0 avail 0) - 0BAA:0002 unknown (no matching reader)
2011/09/20 21:59:46 2C6114B0 c dvbapi: try pids again #2
2011/09/20 21:59:46 2C6114B0 c localuser (0BAA&000000/0002/67:68F7): rejected group (0 ms) (of 0 avail 0) - 0BAA:0002 unknown (no matching reader)
2011/09/20 21:59:46 2C6114B0 c dvbapi: try pids again #3
2011/09/20 21:59:46 2C6114B0 c dvbapi: can't decode channel
2011/09/20 21:59:46 2C6114B0 c localuser (0BAA&000000/0002/67:68F7): rejected group (0 ms) (of 0 avail 0) - 0BAA:0002 unknown (no matching reader)
2011/09/20 22:01:26 2C6114B0 c dvbapi: [ADD PID 0] CAID: 0BAA ECM_PID: 008D PROVID: 000000
2011/09/20 22:01:26 2C6114B0 c dvbapi: new program number: 0058 (0BAA:0058 unknown)
2011/09/20 22:01:26 2C6114B0 c dvbapi: try pids again #1
2011/09/20 22:01:26 2C6114B0 c localuser (0BAA&000000/0058/67:914B): rejected group (0 ms) (of 0 avail 0) - 0BAA:0058 unknown (no matching reader)
2011/09/20 22:01:26 2C6114B0 c dvbapi: try pids again #2
2011/09/20 22:01:26 2C6114B0 c localuser (0BAA&000000/0058/67:914B): rejected group (0 ms) (of 0 avail 0) - 0BAA:0058 unknown (no matching reader)
2011/09/20 22:01:26 2C6114B0 c dvbapi: try pids again #3
2011/09/20 22:01:26 2C6114B0 c dvbapi: can't decode channel
2011/09/20 22:01:26 2C6114B0 c localuser (0BAA&000000/0058/67:914B): rejected group (0 ms) (of 0 avail 0) - 0BAA:0058 unknown (no matching reader)If you are using oscam as cardreader then dvbapi is not needed and will stop CCcam from working.
There are other problems like no matching reader and rejected group, post your oscam configs so we can edit them, also install CCcam 2.1.3.
this is the config i used,
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
logfile = /usr/local/etc/oscam.log
[newcamd]
Key = 0102030405060708091011121314
Port = 34001@0BAA:000000
[webif]
httpport = 16002
httpuser = root
httppwd = xxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
cheers
Jono
Hi jono i need oscam.server and .user also buddy.
Master G I used your ones in here http://linuxsat-support.com/os…ow-cccam-oscam-tring.html
But we changed some thing last night together.
I was wondering do you think the new image icvs dated 6/9/11 really has smargo support i can see in the kernal that the drivers are installed but i'm beging to dout it.
also what do you us to edit your config is word pad ok as when i save the file it says the format may be changed never caused me any problems before with cccam.cfg but who knows maybe now with oscam.cfg.
i have installed last night cccam 213 do i put it on cccam213 + oscam 100 in blue panel or just cccam213?
Cheers Bud
Jono
Delete oscam.dvbapi and give us another log.
What way did you setup the smargo with the windows utility ?
Normal Mode = Linux pc server
Dreambox Mode = Dreambox
sorry to be a total newbie but how do i delete this oscam.dvbapi ?
What way did you setup the smargo with the windows utility ? well i spoke to the guy i got it off who told me it was already latest version and setup for DM box, but last night i tried it in my PC windows seven loaded the drivers automaticaly the update software.exe recognised it was version 1 03 so i tryed the setup utilaty then kept it on automatic, changed it to dreambox, left it on T0 and pressed apply nothing seemed to happen no message on screen or anything so i just thout it must have done it.
regards
jono
Quotesorry to be a total newbie but how do i delete this oscam.dvbapi ?
FTP to /etc/tuxbox/config/ you will see oscam.dvbapi file, right click on it with DCC and delete.
sorry for the delay had to pop home to switch on pc an dm, right lastnight i removed everything in that config file and only kept oscam conf,server and user.
this is todays log
2011/09/20 23:38:59 2C6114B0 c dvbapi: try pids again #1
2011/09/20 23:38:59 2C6114B0 c localuser (0963&000000/0F0A/80:D014): rejected group (0 ms) (of 0 avail 0) - 0963:0F0A unknown (no matching reader)
2011/09/20 23:38:59 2C6114B0 c localuser (0960&000000/0F0A/80:D014): rejected group (0 ms) (of 0 avail 0) - 0960:0F0A unknown (no matching reader)
2011/09/20 23:38:59 2C6114B0 c localuser (0961&000000/0F0A/80:D014): rejected group (1 ms) (of 0 avail 0) - 0961:0F0A unknown (no matching reader)
2011/09/20 23:38:59 2C6114B0 c dvbapi: try pids again #2
2011/09/20 23:38:59 2C6114B0 c localuser (0963&000000/0F0A/80:D014): rejected group (0 ms) (of 0 avail 0) - 0963:0F0A unknown (no matching reader)
2011/09/20 23:39:00 2C6114B0 c localuser (0960&000000/0F0A/80:D014): rejected group (0 ms) (of 0 avail 0) - 0960:0F0A unknown (no matching reader)
2011/09/20 23:39:00 2C6114B0 c localuser (0961&000000/0F0A/80:D014): rejected group (1 ms) (of 0 avail 0) - 0961:0F0A unknown (no matching reader)
2011/09/20 23:39:00 2C6114B0 c dvbapi: try pids again #3
2011/09/20 23:39:00 2C6114B0 c dvbapi: can't decode channel
2011/09/20 23:39:00 2C6114B0 c localuser (0963&000000/0F0A/80:D014): rejected group (1 ms) (of 0 avail 0) - 0963:0F0A unknown (no matching reader)
2011/09/20 23:39:34 2C6114B0 c dvbapi: [ADD PID 0] CAID: 0960 ECM_PID: 0500 PROVID: 000000
2011/09/20 23:39:34 2C6114B0 c dvbapi: [ADD PID 1] CAID: 0961 ECM_PID: 0500 PROVID: 000000
2011/09/20 23:39:34 2C6114B0 c dvbapi: [ADD PID 2] CAID: 0963 ECM_PID: 0500 PROVID: 000000
2011/09/20 23:39:34 2C6114B0 c dvbapi: new program number: 0F5C (0960:0F5C unknown)
2011/09/20 23:39:34 2C6114B0 c localuser (0960&000000/0F5C/80:43D4): rejected group (0 ms) (of 0 avail 0) - 0960:0F5C unknown (no matching reader)
2011/09/20 23:39:35 2C6114B0 c localuser (0961&000000/0F5C/80:43D4): rejected group (0 ms) (of 0 avail 0) - 0961:0F5C unknown (no matching reader)
2011/09/20 23:39:35 2C6114B0 c dvbapi: try pids again #1
2011/09/20 23:39:35 2C6114B0 c localuser (0963&000000/0F5C/80:43D4): rejected group (0 ms) (of 0 avail 0) - 0963:0F5C unknown (no matching reader)
2011/09/20 23:39:35 2C6114B0 c localuser (0960&000000/0F5C/80:43D4): rejected group (0 ms) (of 0 avail 0) - 0960:0F5C unknown (no matching reader)
2011/09/20 23:39:35 2C6114B0 c localuser (0961&000000/0F5C/80:43D4): rejected group (0 ms) (of 0 avail 0) - 0961:0F5C unknown (no matching reader)
2011/09/20 23:39:35 2C6114B0 c dvbapi: try pids again #2
2011/09/20 23:39:35 2C6114B0 c localuser (0963&000000/0F5C/80:43D4): rejected group (1 ms) (of 0 avail 0) - 0963:0F5C unknown (no matching reader)
2011/09/20 23:39:35 2C6114B0 c localuser (0960&000000/0F5C/80:43D4): rejected group (0 ms) (of 0 avail 0) - 0960:0F5C unknown (no matching reader)
2011/09/20 23:39:35 2C6114B0 c localuser (0961&000000/0F5C/80:43D4): rejected group (0 ms) (of 0 avail 0) - 0961:0F5C unknown (no matching reader)
2011/09/20 23:39:35 2C6114B0 c dvbapi: try pids again #3
2011/09/20 23:39:35 2C6114B0 c dvbapi: can't decode channel
2011/09/20 23:39:35 2C6114B0 c localuser (0963&000000/0F5C/80:43D4): rejected group (1 ms) (of 0 avail 0) - 0963:0F5C unknown (no matching reader)
2011/09/21 13:18:12 2BE114B0 h WebIf: Received stale header from 192.168.0.5.
2011/09/21 13:18:27 2BE114B0 h WebIf: Received stale header from 192.168.0.5.
2011/09/21 13:18:42 2BE114B0 h WebIf: Received stale header from 192.168.0.5.
2011/09/21 13:18:46 2BE114B0 h WebIf: Received stale header from 192.168.0.5.should i put the card in to the smargo now and which way should the chip be up pointing towards the top arrowed section of the smargo case or down pointing towrds the smoth base of the case? LOL silly questions i know.
cheers
Jono
Make sure the chip on the card faces the same direction as the lights on the reader and restart oscam.
That log doesnt show anything pal, can we have more info from a recent log.
Strugling at the moment rebooted oscam from browser remotely via logmein and can not get back in to it so may be game over in till i get from the office at 5ish.
will post it as soon as i get it m8.
cheers
jono
Its not good oscam no longer functioning on dm800 it is totally frozen and reciever will not respond lol
i loaded this one http://linuxsat-support.com/os…ips-tuxbox-based-stb.html
think the best thing to do is maybe start again as now when i add my ip followed by :16001 i get cccam server come up.
cheers
Jono
Quotewhen i add my ip followed by :16001 i get cccam server come up.
The webif port in your configs is 16002.
If you can FTP to the DM800 replace the oscam binary.
FTP to /usr/bin/ and delete the oscam binary thats there, replace it with the attached file, chmod 755, restart oscam.
i can ftp but there is nothing oscam in there??? also the file you sent me i can not ftp it over as once i have un rar it ther are many folders and files in it.
is there a way using telnet or something to wipe oscam out and reload it again via the tmp and ftp easy-oscam.tgz and install via telnet?
Its possible its been renamed to something else during the easy install guide you tried.
Open the folder i sent you and you will see a file called oscam, FTP that file and chmod755, restart oscam.
Don’t have an account yet? Register yourself now and be a part of our community!
