Glass System Utility [*deb]

GSU ver. 6.51

- channel info: fix bitrate type detection
- system info: fix total ram calculate

update is available online

Thx@samann

GSU ver. 6.55

- fix devices manager
- fix system info
- some OE2.2 fixes
- added new option "with net check" to activate autocheck of cifs/nfs mounts defined in nfs_cifs.cfg - work correct if device provided network share give a respond to socket on port 80 (webinterface of the device)

update is available online

Thx@shamann

GSU ver. 6.63

- system info: autostop hdd after exit
- added support CA Tandberg
- cifs, nfs: added new option "nolock" in gsu options, used as mount option of nfs if is enabled

- system info: autostop hdd pri ukonceni
- pridana podpora CA Tandberg
- cifs, nfs: v nastaveniach gsupridana moznost pouzit pre mount nfs volbu "nolock", ak je povolena pouzije pri mounte nfs

update is available online

GSU ver. 6.87

- oscam info: fix oscam status
- added option to set refresh time oscam log
- oscam info: fix oscam readers
- fix osd ecm info
- added full support of FHD skins - autodetektion
- updated all screens - autoswitch to 32bit graphics if Full HD mode is active
-
added option of "direct activation" of ECM info press red button
(lowest priority and if image do not use red button as any fnc), can be
enabled/disabled in UCM settings (green - direct start of UCM, red -
direct start of ECM info)
- channel info: added alternative method of tyner type detection

- oscam info: oprava oscam status
- pridana moznost nastavenia refresh time pre oscam log
- oscam info: oprava oscam readers
- oprava osd ecm info
- pridana plna podpora pre FHD skiny - autodetekcia
- aktualizovane vsetky screeny - autoprepnutie na 32bit grafiku ak je Full HD mod aktivny
-
pridana moznost "priamej aktivacie" ECM info stlacenim cerveneho tl.
(najnizsia priorita, pokial si ho image prioritne nemapuje),
povoluje/zakazuje sa v nastaveniach UCM (zelene - spusti priamo UCM,
cervene spusti ECM info)
- channel info: pridana alternativna metoda detekcie typu tunera

update is available online

Thx@shamann

GSU ver. 6.88

- system info: fix CPU using calculation
- system info: fix displaying FHD icons


- system info: oprava vypoctu cpu vyuzitia
- system info: oprava zobrazenie FHD ikon


update is available online

Thx@shamann

GSU ver. 6.91

- fix oscam ymod version detection
- added detection of modulation 16APSK, 32APSK (DVB-S/S2 only)
- fix/corections more of screens

update is available online

Thx@shamann

GSU ver. 6.92

- added support and detection of Gcam

- added alternative method to searching of picons

- fix displaying version of cam/srv in download menu

- pridana podpora a detekcia pre Gcam

- pridana alternativna metoda detekcie picon

- oprava zobrazenia verzie typu cam/srv v ponuke stahovania

Thx@shamann

GSU ver. 7.01

- devices manager: added detection of "empty devices" (f.e.usb HUB) and do not display "empty devices") , added description ext3/4 forfilesystem check

- devices manager: fix detection model/Producer of HDD

- removed: start/stop services, management startup services, network traffic

- changed selection list to color section list

- added script of backup dir "DATA" (deb version only)

- devices manager: pridana detekcia medii, ak nie je medium nezobrazi, pridany popis ext3/4 pre filesystem check

- devices manager: oprava detekcie model/vyrobca pre HDD

- odstranene: start/stop services, management startup services, network traffic

- zmeneny selection list na farebny selection list

- pridany script pre zalohovanie dir "DATA" (len deb verzia)

update is available online

Thx@shamann

GSU ver. 8.03

- change the appearance of all screens

- "Old graphics" replaced for newly created graphics

- fix txt editor for FHD and UHD resolution

- screens correction for HD, FHD, UHD resolution

- biger correction of main code

- ipk/deb packages cleaning

- zmeneny vzhlad u vsetkych screenov

- "stara grafika" vymenena za novo vytvorenu grafiku

- oprava txt editora pre FHD a UHD rozlisenia

- korekcie screenov pre HD, FHD, UHD rozlisenia

- vacsia uprava hlavneho kodu

- precistenie, ipk/deb balikov

update is available online

Thx@shamann

GSU ver. 10.07

- add sk,cz localization

- added dir browser to all config screens where the path is requested

- txt editor extended to fullscreen

- extensive coding and optimization of listings for localization

- device manager: change device mounting type to "by uuid", added detection of partition table error device and every partition, automatic detection of authorized operation with selected device/partition, added SD card detection in SD card reader (deb version only) with full administration and mounting options (test provider on dm900) , added possibility to mount device on multiple mount points (f.e. usb flash disk mount as /media/usb, /media/hdd ...)

- modified/unified appearance for all GSU screens

- fix oscam reader entitlements

- cleaning ipk/deb packages from unnecessary files

- fix TXTeditor

- pridana sk, cz lokalizacia celeho pluginu

- pridany prehliadac priecinkov pre cfg kde je pozadovane zadanie cesty

- txt editor rozsireny na celu obrazovku

- rozsiahla uprava kodu a optimalizacia vypisov pre lokalizacie

- spravca zariadeni: zmenene pripajanie zariadeni na typ by uuid, pridana detekcia chybnej tabulky particii aj u particii, automaticka detekcia povolenych operacii so zvolenym zariadenim/particiou, pridana detekcia SD karty v citacke SD kariet(len deb verzia) s plnohodnotnou spravou a moznostami pripojenia (testovane na dm900), pridana moznost viacnasobneho pripojenie zariadenia/particie (napr. USB flash disk pripojit ako /media/usb, /media/hdd ....)

- upraveny/zjednoteny vzhlad pre vsetky screeny gsu

- oprava oscam reader entitlements

- precistene ipk/deb instalacne baliky od nepotrebnych files

- oprava txt editora

update is available online

Thx@shamann

GSU ver. 10.14

- added help with translations to CAM/SRV manager

- edited script centers with full support for naming translations and user script descriptions

- added another cmd options for oscam start cfg

- updated sk, cz translations

- added picon channel to CAM/SRV manager

- fix UHD, FHD, HD screen for CAM/SRV manager

- changed calculation of position of satellite from static to dynamic by tuned data from tuner - it also allows you to get info about the newly created or non-standard sat positions - used in the channel information, CAM/SRV manager

- pridany help s prekladmi do spravcu CAM/SRV

- upraveny script center s plnou podporou prekladov nazvu a popisu user scriptov

- pridane dalsie cmd moznosti pre oscam start cfg

- aktualizovane sk,cz preklady

- pridany picon kanalu do UCM

- oprava UHD,FHD,HD screenov pre spravcu CAM/SRV

- zmeneny vypocet pozicie sat zo statickeho na dynamicky podla dat z tunera - umoznuje ziskat info aj o novovzniknutych/nestandardnych sat pozicii - vyuzite v informaciach o kanale, spravca CAM/SRV

update is available online

Thx@shamann

GSU ver. 10.18

- added enhanced method searching picons

- CAM/SRV manager: fix avalaible CAIDs

- main code and screens corrections

- fix/enhanced detection DVB-T/T2

- fix channel information screen

- pridana rozsirena metoda vyhladania picon

- spravca CAM/SRV: oprava zobrazenia dostupnych caid

- drobne korekcie kodu a screenov

- oprava/rozsirena detekcia DVB-T/T2

- oprava screenu pre info o kanale

update is available online

Thx@shamann