Suddenly "channel not subscibed"

There are 17 replies in this Thread which was already clicked 2,910 times. The last Post () by seened3.

    This morning my server with Oscam 1.00 Unstable (yes i should upgrade) but it has worked so far.
    I get this in the log
    [***********-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    And it worked yesterday. Sometimes i have to put it in the original box, and make V****t resend signal, card works 100% i orginal box.


    Any suggestions??

    But how come that it has been working for over 2 years? Each 3 months i had to put the card into the original receiver to update the card, and then back in my dm800, and it has always worked perfectly. I will look into the other thread when i get home. Would it be a good idear to update oscam?

    Hi master G.
    Is there any way to test if that indeed is the case?


    - - - Updated - - -


    This is what the log says.
    2015/03/13 17:42:19 XXXX4F0 XX 37 EF 4D 81 00 00 47 08 0B AC FC 38 43 CC 23
    2015/03/13 17:42:19 XXXX4F0 XX 90 79 C0 01 C3 A6 4D 9B 6B 26 4D 38 31 D3 56
    2015/03/13 17:42:19 XXXX4F0 XX E6 47 DA XX 1C 88 02 A4 80 5E 14 7F 30 09 FB
    2015/03/13 17:42:19 XXXX4F0 XX F7 56 A5 48 E2 93 XX 3C 9D 28 69 01 E3 FB 41
    2015/03/13 17:42:19 XXXX4F0 XX 0C 23 93 83 65 6B A9 7A C4 XX 82 E3 AE 55 F2
    2015/03/13 17:42:19 XXXX4F0 XX CC BA 25 4D 72 5C 0B B5 66 D4 8A 39 7F 54 81
    2015/03/13 17:42:19 XXXX4F0 XX 5C C2 43 1D 6E F6 5C A7 19 03 C4 82 18 9E DA
    2015/03/13 17:42:19 XXXX4F0 XX C1 CB 00 A8 44 6C 3F 09 6B C3 32 B0 00 91 22
    2015/03/13 17:42:19 XXXX4F0 XX 0D 1A EA 00 EE AE C1 74 XX 3A C2
    2015/03/13 17:42:19 XXXX4F0 c ncd_process_ecm: er->cpti=0, cl_msgid=3522, 80
    2015/03/13 17:42:19 XXXX4F0 c trying user '0001' filter 093E:000000
    2015/03/13 17:42:19 XXXX4F0 c 093E:000000 allowed by user '0001' filter 093E:000000
    2015/03/13 17:42:19 XXXX4F0 c trying server filter 093E:000000
    2015/03/13 17:42:19 XXXX4F0 c 093E:000000 allowed by server filter 093E:000000
    2015/03/13 17:42:19 XXXX4F0 c cache: EA16 not found count=28
    2015/03/13 17:42:20 XXXX4F0 c ncd_send_dcw: er->cpti=0, cl_msgid=4346, 81
    2015/03/13 17:42:20 XXXX4F0 c send 15 bytes to client
    2015/03/13 17:42:20 XXXX4F0 00 0D 10 FA 00 00 00 00 00 00 00 00 81 00 00
    2015/03/13 17:42:20 XXXX4F0 c 0001 (093E&000000/0C30/AA:73D8): timeout (5005 ms) (of 0 avail 0)
    2015/03/13 17:42:20 XXXX4F0 c cw:
    2015/03/13 17:42:20 XXXX4F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    2015/03/13 17:42:20 XXXX4F0 c ncd_send_dcw: er->cpti=0, cl_msgid=76, 81
    2015/03/13 17:42:20 XXXX4F0 c send 15 bytes to client
    2015/03/13 17:42:20 XXXX4F0 00 0D 00 4C 00 00 00 00 00 00 00 00 81 00 00
    2015/03/13 17:42:20 XXXX4F0 c 0001 (093E&000000/1220/DE:XXY2): timeout (5005 ms) (of 0 avail 0)
    2015/03/13 17:42:20 XXXX4F0 c cw:
    2015/03/13 17:42:20 XXXX4F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


    - - - Updated - - -


    This is were i useally put the card in the original box, ask tha V*** to send new activation, and then my card works 3 more months.
    It seems like the card will not accept the new expiry date.


    - - - Updated - - -


    Also i noticed this.
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 012f, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 0131, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 0139, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 013f, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 0156, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 0158, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 015c, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 015d, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 016e, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 016f, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 0170, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 0173, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 0177, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 0178, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 0180, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 0188, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 0189, expiry date: 2015/05/12-00:00:00
    2015/03/13 18:37:46 XXXX04F0 r [v********-reader] tier: 018b, expiry date: 2015/05/12-00:00:00


    This is were i useally put the card in the original box, ask tha V*** to send new activation, and then my card works 3 more months.
    It seems like the card will not accept the new expiry date.

    Hi stevejo.
    You seem to think that V********* made some change with there cards??
    It would be nice to know if there was just the slightest possibilty to fix this problem.

    There is no solution to the problem, some say there are already solution for this in private oscam but think this is just nonsense!


    The only known solution that is currently acquiring an approved Viasat sd tuner and associate card to this. You will then get a new boxid and card works again in oscam.
    This now applies to all countries that supply Viasat channels 4.8E


    Sooner or later Viasat forcing customers to use HD tuners again and it will cost them a lot of money. There are even many thousands who even uses sd tuners so this may take time.....

    The solution would be to get Oscam to ignore expire date.
    But i am not even close to being that kind of pro to figure that out :-)
    It is only greatly annoying for me, i have 3 receivers in my house, thats why i use Oscam.
    But if i go order a new box and card (watering flowers went wront, LoL ) i would again get ad HD box, but then maybe it would work for anther 3 months??


    - - - Updated - - -


    Just noticed that the expire date is ok now. Now i am only fighting
    reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    message.

    Get an sd box and get them to pair the card to it and tell them you soaked the other box and no money for a new one and you will use sd for now , this is not to do with dates its to do with hardware pairing and ecm needing to be read via another route , an sd box is your only solution

    Thanx Hacked. That did the trick.
    I just have two more questions.
    1. How can i get Oscam to update the expire date on its own, pretty annoying that i have to put i original receiver every two-three months.
    2. I have tryid to update Oscam, but without luck, can you guide me to latest Oscam that works on a DM600PVR-S


    Thanx for your help, also stevejo.

    These settings will update your 093E card




    [reader]
    label = Viasat
    protocol = internal
    device = /dev/sci1
    caid = 093E
    ident = 093E:000000
    boxid = xxxxxxxx
    detect = cd
    mhz = 450
    cardmhz = 3150
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-s = 1
    blockemm-u = 0
    blockemm-g = 0



    [account]
    user = dvbapi
    au = Viasat
    group = 1





    Here is the latest oscam to dm 600:
    http://download.oscam.cc/index.php?&direction=0&order=mod&directory=1.20_TRUNK/powerpc-tuxbox


    download this: oscam-svn10630-powerpc-tuxbox-webif-Distribution.tar.gz


    standing slightly in Section 3 on how to update oscam bin file, only difference is that on dreambox so is oscam bin file located in /usr/bin/:
    http://linuxsat-support.com/showthread.php?t=30959



    this is at least a beginning:goodluck:

    Thanx mate.
    Finally got the time to play with it.
    Just one thing bothering me now, the new oscam does not find the config files, my existing config files lie under etc/tuxbox/config


    Thanx

    • Official Post
    Quote from Syntaxmovies


    Just one thing bothering me now, the new oscam does not find the config files, my existing config files lie under etc/tuxbox/config


    Thanx


    Login to oscam webif > click Files then oscam.version > This will show you the default config directory.


    Code
    Unix starttime: 1427705249
Starttime:      30.03.2015 09:47:29
Version:        oscam-1.20-unstable_svn-r10611
Compiler:       mipsel-unknown-linux-gnu
Box type:       vuduo2 (generic)
[COLOR='#FF0000']ConfigDir:      /etc/tuxbox/config/[/COLOR]
WebifPort:      8888

    Please don't sigh.
    I just tryied to move the card to my other box, but no go.
    It's an old Sunray, a DM800 clone. I have everything running and in good order with
    Version: oscam-1.20-unstable_svn-r788
    Compiler: mipsel-unknown-linux-gnu
    ConfigDir: /var/tuxbox/config/


    It starts up, reads the card, but says
    2015/05/21 09:01:19 58B480 r *** [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
    2015/05/21 09:01:19 58D180 h webif: decompressed 69662 bytes back into 195704 bytes
    2015/05/21 09:01:19 58D180 h HTTP Server running. ip=0.0.0.0 port=8888
    2015/05/21 09:01:20 58B480 r v*** [internal] card detected
    2015/05/21 09:01:22 58B480 r v*** [internal] ATR: 3F 7D 11 25 02 41 B0 03 69 FF 4A 50 F0 80 00 56 54 03
    2015/05/21 09:01:22 58B480 r v*** [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
    2015/05/21 09:01:22 58B480 r v*** [internal] Calculated work ETU is 74.40 us reader mhz = 500
    2015/05/21 09:01:22 58B480 r v*** [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
    2015/05/21 09:01:24 58B480 r v*** [internal] card system not supported
    2015/05/21 09:01:24 58B480 r v*** [internal] Normal mode failed, reverting to Deprecated Mode


    Any idears??

    [reader]
    label = kaart
    protocol = internal
    device = /dev/sci0
    caid = 093E
    boxid = xxxxxxx
    fix07 = 0
    readtiers = 2
    detect = cd
    mhz = 500
    cardmhz = 257
    ident = 093E:000000
    group = 1
    emmcache = 1,3,2
    #blockemm-g = 1
    saveemm-unknown = 1
    saveemm-u = 1
    saveemm-s = 1
    ndsversion = 2

  • master G

    Set the Label from Viasat OSCam to Nagra Cards OSCam

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login