There are 9 replies in this Thread which was already clicked 2,394 times. The last Post () by snifferdsx.
Evening all, running openelec with tvheadend, using the guides meant for sat i eventually scanned in some channels and got this box running.
I am however missing a load channels and a lot of the EPG data for the channels i do have....
How do i go about rescanning ?? The "force scan" button under networks is not working...
Also Is there a way of using the pvr epg channel (for epg data) like i do on my enigma2 box?? Or is there another solution ?
Some screen shots of my settings:
u need to giv 2 feeds together
and looking at tht luks like uv installed the T drivers not the C drivers so make sure u have installed the c driver and make sure ,,if ur tuner is a 2 input u have to giv to connections together from ur cable line
ok thts good there is a twin tuner about also ,,i have a twin tuner ,,,have u made sure tht u hav the C drivers installed also,,and which area do u live in ,,and at end of ur S RATE MAKE SURE U ADD 3 ZEROS and frequency tht u trying to scan put 6 zeros
- - - Updated - - -
sorry which country r u
when you added your Mux what did you set the frequency to?
In tvh you need only add for example one Mux and only need to select ANNEX_A when making mux. If your frequency for example is 323 MHz you will enter it 323000000 and that is enough, as WeTek tuner detect automatically SR and other parameters, and by NIT it will discover all other muxes and scan them
oke this how i did it by upc dutch cable
QuoteDisplay MoreProvincie Netwerk ID
Flevoland 43138
Friesland 43140
Gelderland 43142
Noord-Brabant 43144
Noord Holland 43136
Zuid-Holland 43146
- - - Updated - - -
In tvh you need only add for example one Mux and only need to select ANNEX_A when making mux. If your frequency for example is 323 MHz you will enter it 323000000 and that is enough, as WeTek tuner detect automatically SR and other parameters, and by NIT it will discover all other muxes and scan them
this not true
if i scan with out network id i get the channel but not all channles works if i scan with it scan the channel i need in my regio
if you scan it on android it ask your county
look here howto for use w_scan http://www.wetekforums.com/viewforum.php?f=23&sid=ab73e0717dcb20d7078d7ee260e38734
then page 2 look for "[TUTORIAL] Using w_scan on DVB-T/T2/C" made by rot30
sorry is not my tutorial so i cant post it here
