Sky UK oscam setup problem

Vishaal · Apr 27th 2015

Hello,

I'm trying to setup and oscam server with my skycard but getting problem with this:

Code

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10652
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt




[global]
disablelog                    = 1
logfile                       = /var/log/oscam.log
unlockparental                = 1
waitforcards                  = 0
block_same_ip                 = 0
block_same_name               = 0
failbantime                   = 10
failbancount                  = 5




[cache]




[cccam]
port                          = 43568
nodeid                        = DB45F87F10A3157E
version                       = 2.0.11




[webif]
httpport                      = 1111
httpuser                      = test
httppwd                       = test
httpallowed                   = 192.168.0.0-192.168.255.255

Display More

Code

[reader]
label                         = skyuk
protocol                      = smargo
device                        = /dev/ttyUSB0
caid                          = 0963
boxid                         = xxxxxxx
detect                        = cd
mhz                           = 600
cardmhz                       = 600
ident                         = 0963:000000
group                         = 1
emmcache                      = 1,1,15
blockemm-unknown              = 1
blockemm-g                    = 1
saveemm-u                     = 1
saveemm-s                     = 1
ndsversion                    = 2

Display More

Code

[account]
user                          = bovenbox
pwd                           = password
caid                          = 0963
au                            = skyuk
group                         = 1
ident                         = 0963:000000

Getting this in log files

Code

2015/04/27 01:33:29  19CA2C0 r   (reader) skyuk [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/04/27 01:33:29  19D41D0 c      (ecm) bovenbox (0963&000000/FFFF/C521/63:CBEAEEBD35F6E860AE77C64877496229): not found (229 ms) by skyuk

This is an SD channel but still not working

**dejv** · Apr 27th 2015

card is pared to hd receiver. you have to pair it to an sd receiver

Vishaal · Apr 27th 2015

^ The card was working before, i just have reboot mine router after that when it startup it give this error.
The SD channels like Star Max, Set Asia all give this error.
There are no HD channel of this.

**master G** · Apr 27th 2015

Just to clarify your setup, you are using an enigma2 receiver with uk card in a smargo ?

I would try a different version of oscam that is compiled for smargo support (libusb).

Remove the Boxid from oscam.server.

Do you still have the same amount of entitlements as before ?

Are other premium channels working ?

Which official sky decoder is the card paired to ? Has the card been in this decoder recently ?

Vishaal · Apr 27th 2015

Hello Master,

No i have an debian server with uk card in a smargo.

I have removed the boxID it give this now:

Code

2015/04/27 11:30:45  20BFC20 h   (reader) skyuk [videoguard2] Restarting reader
2015/04/27 11:30:45  20BFC20 h   (reader) skyuk [videoguard2] creating thread for device /dev/ttyUSB0
2015/04/27 11:30:45  20CA8F0 r   (reader) skyuk [videoguard2] Buffers readed  0 bytes total time_us 75080
2015/04/27 11:30:45  20CA8F0 r   (reader) skyuk [videoguard2] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2015/04/27 11:30:45  20CA8F0 r   (reader) skyuk [videoguard2] card detected
2015/04/27 11:30:50  20CA8F0 r   (reader) skyuk [smargo] ATR: 3F FD 13 25 02 50 00 0F 33 B0 16 69 FF 4A 50 D0 80 00 53 59 03 
2015/04/27 11:30:50  20CA8F0 r   (reader) skyuk [smargo] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/27 11:30:50  20CA8F0 r   (reader) skyuk [smargo] Calculated work ETU is 15.50 us reader mhz = 600
2015/04/27 11:30:50  20CA8F0 r   (reader) skyuk [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/04/27 11:30:52  20CA8F0 r   (reader) skyuk [smargo] Card type:   SYAV
2015/04/27 11:30:52  20CA8F0 r   (reader) skyuk [smargo] Rom version: 50LN
2015/04/27 11:30:52  20CA8F0 r   (reader) skyuk [smargo] Credit available on card: 35 euro
2015/04/27 11:30:52  20CA8F0 r   (reader) skyuk [smargo] classD0 ins36: encrypted - can't parse
2015/04/27 11:30:52  20CA8F0 r   (reader) skyuk [smargo] no boxID available
2015/04/27 11:30:52  20CA8F0 r   (reader) skyuk [smargo] card system not supported
2015/04/27 11:30:52  20CA8F0 r   (reader) skyuk [smargo] Normal mode failed, reverting to Deprecated Mode
2015/04/27 11:30:56  20CA8F0 r   (reader) skyuk [smargo] ATR: 3F FD 13 25 02 50 00 0F 33 B0 16 69 FF 4A 50 D0 80 00 53 59 03 
2015/04/27 11:30:56  20CA8F0 r   (reader) skyuk [smargo] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/27 11:30:56  20CA8F0 r   (reader) skyuk [smargo] Calculated work ETU is 62.00 us reader mhz = 600
2015/04/27 11:30:56  20CA8F0 r   (reader) skyuk [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/04/27 11:30:59  20CA8F0 r   (reader) skyuk [smargo] card system not supported
2015/04/27 11:30:59  20CA8F0 r   (reader) skyuk [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/04/27 11:30:59  20CA8F0 r   (reader) skyuk [smargo] card initializing error

Display More

**master G** · Apr 27th 2015

Check the smargo is set to normal mode, not dreambox mode with this tool => Smargo windows update utility

These parameters in oscam.server are configured for dreambox:

Code

protocol                      = smargo
device                        = /dev/ttyUSB0

In a terminal window run this lsusb

You will get an output like this:

Code

Bus  Device : ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

Change your configs to this :

Code

[reader]
label                         = skyuk
protocol                      = smartreader
device                        = 001:005
caid                          = 0963
detect                        = cd
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
blockemm-g                    = 1
saveemm-u                     = 1
saveemm-s                     = 1

Display More

Vishaal · Apr 27th 2015

Dear Master,

It seems in oscam r10652 we don't have protocol smartreader.
I have changed the config in oscam.server but then webif can't display the reader.

lsusb result:

Code

root@debianst:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
root@debianst:~#

**master G** · Apr 27th 2015

You need oscam-svn10650-pc-linux-webif-libusb-Distribution.tar.gz

Use either i686-pc-linux or x86_64-pc-linux depending on which linux kernal you have.

In terminal run this to find out which linux kernal you have:

Code

uname -r

Vishaal · Apr 27th 2015

Kernal:

Code

root@debianst:~# uname -r
3.2.0-4-amd64
root@debianst:~#

How to install the oscam-svn10650-pc-linux-webif-libusb-Distribution.tar.gz

**master G** · Apr 27th 2015

Version you need for amd64 is x86_64-pc-linux oscam-svn10652-x86 64-pc-linux-webif-libusb-ssl-Distribution

Download and extract the oscam required, inside the download will be the oscam binary.

Find the oscam binary on debian, it`s usually installed to /usr/local/bin folder. Take note of the spelling of this oscam. Rename this oscam to oscam1.

FTP the new/downloaded oscam to the same folder (change the spelling of this oscam to how the previous oscam was, if required). Change permissions to 755. Reboot the server.

If you have any problems with the new oscam, just rename old version back to how it originally was..

Vishaal · Apr 27th 2015

^ how to install it??
I have got the file but what to do with it??

**master G** · Apr 27th 2015

Quote from Vishaal

^ how to install it??
I have got the file but what to do with it??

Read back, i have updated my previous post.

Vishaal · Apr 27th 2015

^ done thx:)..

Now is oscam.server

Code

[reader]
label                         = skyuk
protocol                    = smartreader
device                       = 003:002
caid                          = 0963
detect                        = cd
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
blockemm-g                    = 1
saveemm-u                     = 1
saveemm-s                     = 1

Display More

lsusb:

Code

root@debianst:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
root@debianst:~#

log:

Code

2015/04/27 13:23:53        0 s     (main) System name    = Linux
2015/04/27 13:23:53        0 s     (main) Host name      = debianst
2015/04/27 13:23:53        0 s     (main) Release        = 3.2.0-4-amd64
2015/04/27 13:23:53        0 s     (main) Version        = #1 SMP Debian 3.2.68-1+deb7u1
2015/04/27 13:23:53        0 s     (main) Machine        = x86_64
2015/04/27 13:23:53        0 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2669
2015/04/27 13:23:53        0 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/04/27 13:23:53        0 s     (main) signal handling initialized
2015/04/27 13:23:53        0 s   (reader) skyuk [smartreader] creating thread for device 003:002
2015/04/27 13:23:53        0 s     (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/27 13:23:53        0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/04/27 13:23:53        0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/04/27 13:23:53        0 s (anticasc) anti cascading disabled
2015/04/27 13:23:53  24A3FC0 h    (webif) webif: decompressed 152416 bytes back into 366368 bytes
2015/04/27 13:23:53  24A3FC0 h    (webif) HTTP Server running. ip=0.0.0.0 port=1111
2015/04/27 13:23:53  24A7690 r   (reader) skyuk [smartreader] Endpoint check failed, assuming this is not a smartreader
2015/04/27 13:23:53  24A7690 r   (reader) skyuk [smartreader] Smartreader device 003:002 not found
2015/04/27 13:23:53  24A7690 r   (reader) skyuk [smartreader] Cannot open device: 003:002
2015/04/27 13:23:55  24A7690 r   (reader) skyuk [smartreader] Endpoint check failed, assuming this is not a smartreader
2015/04/27 13:23:55  24A7690 r   (reader) skyuk [smartreader] Smartreader device 003:002 not found
2015/04/27 13:23:55  24A7690 r   (reader) skyuk [smartreader] Cannot open device: 003:002
2015/04/27 13:23:57  24A7690 r   (reader) skyuk [smartreader] Endpoint check failed, assuming this is not a smartreader
2015/04/27 13:23:57  24A7690 r   (reader) skyuk [smartreader] Smartreader device 003:002 not found
2015/04/27 13:23:57  24A7690 r   (reader) skyuk [smartreader] Cannot open device: 003:002
2015/04/27 13:23:59  24A7690 r   (reader) skyuk [smartreader] Endpoint check failed, assuming this is not a smartreader
2015/04/27 13:23:59  24A7690 r   (reader) skyuk [smartreader] Smartreader device 003:002 not found
2015/04/27 13:23:59  24A7690 r   (reader) skyuk [smartreader] Cannot open device: 003:002
2015/04/27 13:24:01  24A7690 r   (reader) skyuk [smartreader] Endpoint check failed, assuming this is not a smartreader
2015/04/27 13:24:01  24A7690 r   (reader) skyuk [smartreader] Smartreader device 003:002 not found
2015/04/27 13:24:01  24A7690 r   (reader) skyuk [smartreader] Cannot open device: 003:002
2015/04/27 13:24:03  24A7690 r   (reader) skyuk [smartreader] Endpoint check failed, assuming this is not a smartreader
2015/04/27 13:24:03  24A7690 r   (reader) skyuk [smartreader] Smartreader device 003:002 not found
2015/04/27 13:24:03  24A7690 r   (reader) skyuk [smartreader] Cannot open device: 003:002
2015/04/27 13:24:05  24A7690 r   (reader) skyuk [smartreader] Endpoint check failed, assuming this is not a smartreader
2015/04/27 13:24:05  24A7690 r   (reader) skyuk [smartreader] Smartreader device 003:002 not found
2015/04/27 13:24:05  24A7690 r   (reader) skyuk [smartreader] Cannot open device: 003:002
2015/04/27 13:24:07  24A7690 r   (reader) skyuk [smartreader] Endpoint check failed, assuming this is not a smartreader
2015/04/27 13:24:07  24A7690 r   (reader) skyuk [smartreader] Smartreader device 003:002 not found
2015/04/27 13:24:07  24A7690 r   (reader) skyuk [smartreader] Cannot open device: 003:002
2015/04/27 13:24:09  24A7690 r   (reader) skyuk [smartreader] Endpoint check failed, assuming this is not a smartreader
2015/04/27 13:24:09  24A7690 r   (reader) skyuk [smartreader] Smartreader device 003:002 not found
2015/04/27 13:24:09  24A7690 r   (reader) skyuk [smartreader] Cannot open device: 003:002
2015/04/27 13:24:11  24A7690 r   (reader) skyuk [smartreader] Endpoint check failed, assuming this is not a smartreader
2015/04/27 13:24:11  24A7690 r   (reader) skyuk [smartreader] Smartreader device 003:002 not found
2015/04/27 13:24:11  24A7690 r   (reader) skyuk [smartreader] Cannot open device: 003:002
2015/04/27 13:24:13  24A7690 r   (reader) skyuk [smartreader] Endpoint check failed, assuming this is not a smartreader
2015/04/27 13:24:13  24A7690 r   (reader) skyuk [smartreader] Smartreader device 003:002 not found
2015/04/27 13:24:13  24A7690 r   (reader) skyuk [smartreader] Cannot open device: 003:002

Display More

**master G** · Apr 27th 2015

Did you set the smargo to normal mode with the Smargo windows update utility ?
If you set the original configs back in oscam.server and the card initializes, the smargo is still in dreambox mode.

Code

protocol                      = smargo
device                        = /dev/ttyUSB0

Vishaal · Apr 27th 2015

^ how can i solve this problem?

I have try it with http://linuxsat-support.com/showthread.php?t=5039 but same problem?

- - - Updated - - -

^ after an hard reboot it seems working now.
Now mine oscam.server is:

Code

[reader]
label                         = skyuk
protocol                      = smartreader
device                        = 005:002
caid                          = 0963
detect                        = cd
group                         = 1
emmcache                      = 1,3,2,0
blockemm-unknown              = 1
blockemm-g                    = 1
saveemm-u                     = 1
saveemm-s                     = 1

Display More

log:

Code

2015/04/27 14:41:55        0 s     (main) signal handling initialized
2015/04/27 14:41:55        0 s     (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/27 14:41:55        0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/04/27 14:41:55        0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/04/27 14:41:55        0 s (anticasc) anti cascading disabled
2015/04/27 14:41:55  1C84FC0 h    (webif) webif: decompressed 152416 bytes back into 366368 bytes
2015/04/27 14:41:55  1C84FC0 h    (webif) HTTP Server running. ip=0.0.0.0 port=1111
2015/04/27 14:42:15  1C84FC0 h   (reader) skyuk [smartreader] Restarting reader
2015/04/27 14:42:15  1C84FC0 h   (reader) skyuk [smartreader] creating thread for device 005:003
2015/04/27 14:42:15  1C92380 r   (reader) skyuk [smartreader] Reader initialized (device=005:003, detect=cd, mhz= AUTO, cardmhz=369)
2015/04/27 14:42:16  1C92380 r   (reader) skyuk [smartreader] card detected
2015/04/27 14:42:19  1C92380 r   (reader) skyuk [smartreader] ATR: 3F FD 13 25 02 50 00 0F 33 B0 16 69 FF 4A 50 D0 80 00 53 59 03 
2015/04/27 14:42:19  1C92380 r   (reader) skyuk [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/27 14:42:19  1C92380 r   (reader) skyuk [smartreader] Calculated work ETU is 17.42 us reader mhz = 534
2015/04/27 14:42:19  1C92380 r   (reader) skyuk [smartreader] Effective reader settings mhz =534 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
2015/04/27 14:42:20  1C92380 r   (reader) skyuk [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/04/27 14:42:21  1C92380 r   (reader) skyuk [smartreader] Card type:   SYAV
2015/04/27 14:42:21  1C92380 r   (reader) skyuk [smartreader] Rom version: 50LN
2015/04/27 14:42:21  1C92380 r   (reader) skyuk [smartreader] Credit available on card: 35 euro
2015/04/27 14:42:21  1C92380 r   (reader) skyuk [smartreader] classD0 ins36: encrypted - can't parse
2015/04/27 14:42:21  1C92380 r   (reader) skyuk [smartreader] no boxID available
2015/04/27 14:42:21  1C92380 r   (reader) skyuk [smartreader] card system not supported
2015/04/27 14:42:21  1C92380 r   (reader) skyuk [smartreader] Normal mode failed, reverting to Deprecated Mode
2015/04/27 14:42:25  1C92380 r   (reader) skyuk [smartreader] ATR: 3F FD 13 25 02 50 00 0F 33 B0 16 69 FF 4A 50 D0 80 00 53 59 03 
2015/04/27 14:42:25  1C92380 r   (reader) skyuk [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/27 14:42:25  1C92380 r   (reader) skyuk [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2015/04/27 14:42:25  1C92380 r   (reader) skyuk [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=2 T=0 inv=1 parity=ODD
2015/04/27 14:42:25  1C92380 r   (reader) skyuk [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/04/27 14:42:28  1C92380 r   (reader) skyuk [smartreader] card system not supported
2015/04/27 14:42:28  1C92380 r   (reader) skyuk [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/04/27 14:42:28  1C92380 r   (reader) skyuk [smartreader] card initializing error

Display More

It still need the boxid

- - - Updated - - -

^ got it working..
There is 2 boxID now i have used the second one that works perfect on the SD channels.
the other BoxID was working only on few.

Sky UK oscam setup problem

master G May 3rd 2020

OSCam Support Forum

Participate now!

Share

Similar Threads

Updating Oscam to latest SVN - Ubuntu & debian with Simplebuild

powervu channel working but some channel audio not ok only video

Oscam server setup for powervu autoroll and biss

Mutant HD51 4k keep freezing on cccam and oscam

Is Oscam better or CCcam

mgcamd / cccamd combination problem

Tags