Dont remove cccam or they wont connect you need it in oscam conf for the client boxes to connect ,dvbapi updates cards just fine on its own what is your expiry date
the first is 01/06/15
i'll remove newcamd then, i've gotta remove something lol.
regards: canthackit
mate try to put all over web interface, it is much easier and ostool (oscam) will write files to NAND flash with right CHMOD permissions and like that will work 1001% percent
if you need help I can help you over teamviewer
if i may i'll take you up on you kind offer.
i'm really struggling here.
if you want to pm me i'll be ready.
regards: canthackit
Display MoreBH on the server DB800 SE clone
running Oscam only few problem atm card not updating, but still won't use CCcam or mg_camd as a client.
the only reason i have dvbapi enabled is so my peers can connect using CCcam.
you've just got me thinking "why have i got CCcam and Newcamd setup on the server"? i might as well remove them.
regards: canthackit
1/6/15 and you say your card isnt updating ?
yeah i had to put in back into the original box mate.
regards: canthackit
- - - Updated - - -
mate try to put all over web interface, it is much easier and ostool (oscam) will write files to NAND flash with right CHMOD permissions and like that will work 1001% percent
if you need help I can help you over teamviewer
still struggling, just reread your post not seen it anywhere! is there a way to set the attributes? or does oscam on the wetek set them by default?
what i can't understand either is, when i first posted it was only the sports and movies that i couldn't clear the other encrypted channels worked, now though i cant clear a thing, apart from fta of course.
regards: canthackit
This thread is confusing me is it in an 800se clone or a wetek xbmcflix is giving wetek advice I seem to think its in a box but not sure now as there is a crearing channels issue and updating issue this needs some clarity
ok
let me try this way.
the server is a DB800 SE HD clone running oscam 10641 only, all my other peers are connecting just fine, but not the wetek.
i'm trying to connect the wetek on android with wetheatre to the server as a client with oscam.
sorry mate but i can be no clearer than that.
hope this helps.
best regards: canthackit
like you i use wetek theater this config works for me
[reader]
label = localbox_db
protocol = cccam
device = 192.168.1.111111,port
user = wetek
password = openelec
inactivitytimeout = 30
group = 1
cccversion = 2.1.3
cccmaxhops = 4
ccckeepalive = 1
audisabled = 1
Display Moreok
let me try this way.
the server is a DB800 SE HD clone running oscam 10641 only, all my other peers are connecting just fine, but not the wetek.
i'm trying to connect the wetek on android with wetheatre to the server as a client with oscam.
sorry mate but i can be no clearer than that.
hope this helps.
best regards: canthackit
Double check in your oscam.conf file that the settings for dvbapi are the same as below....
[dvbapi]
enabled = 1
au = 1
user = tvh
boxtype = pc
I had the boxtype as a dreambox as my server is running on an e2 box..... changing it to pc made everything work (clearing channels I mean).
Really really sorry guy's.
tried your configs still getting "scrambled channel" only fta clearing.
these are the configs i have.
ON THE WETEK
OSCAM.CONF
[global]
logfile = /dev/tty
fallbacktimeout = 4000
nice = -1
preferlocalcards = 1
[cache]
[cccam]
port = 12000
serverip = 192.168.0.100
nodeid = B55339B110D4150A
version = 2.0.11
reshare = 1
[dvbapi]
enabled = 1
au = 1
user = tvh (tried leaving this as is and changing to "local"
boxtype = pc
[webif]
httpport = 8888
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
hideclient_to = 15
OSCAM.USER
[account]
user = linuxsat
pwd = support
description = $$$uk
group = 1
cccmaxhops = 1
OSCAM.SERVER
[reader]
label = localbox_db
description = local
protocol = cccam
device = 192.168.0.100, 12000
user = linuxsat
password = support
inactivitytimeout = 30
group = 1
cccversion = 2.0.11
ccckeepalive = 1
ENTRY ON THE SERVER
OSCAM.USER
[account]
user = linuxsat
pwd = support
group = 1
cccmaxhops = 1
hope it makes sense.
best regards: canthackit
You need an account for tvh in your oscam configs... That's how tvheadend connects to your server....
Sent from my iPhone 6 using Tapatalk Pro
Thanks mckee25
but i'm not trying to connect thro openelec and tvheadend, i'm trying on andriod and wetheatre.
regards: canthackit
- - - Updated - - -
just done the latest SW update.
reinstalled my apps, ostool settings look different, didn't change to much basicly just added a username to the [account]
sorry still don't work.
although I admit i'm not the brightest bulb in the box, I can't believe that with all your help and the little bit of knowledge I have, that i'm a complete dumbo in trying to get this to work.
your thoughts guy's.
regards: canthackit
ill install teamveiwer in sort this later the day if yah want will need a link to software but if yah sort a time wi me thats good for both oh us ill have a gander via that in chat via skype if yah wanna, ill update my WeTek to same update as yerself in next cpl hour so im at same point as you are at the now.
upti you Canthackit
you're a diamond mate.
just give me a time that's convenient and i'll be ready.
think it's best any further contact via PM
regards: canthackit
pm sent 10 charicters
your worst nightmares are back i'm here again :78:
so i've now installed a different box as a server a Technomate Nano 2T, and done as Honcho has suggested to me on teamviewer and setup oscam/mg_camd working perfectly ok.
so now what i want to try is connecting the wetek via newcamd instead of CCcam.......can this be done?
if possible i want to remove CCcam or at least the config and setup newcamd.
unfortunately i'm not sure about the procedure, i think i'm right in saying i need to create an N line, but how do i do this and where do they go?
best regards: canthackit
yeah this can be done pm sent
Honcho could you please pm me too... im interested in setting newcamd... thanks.... sorry my english is littlebit ...
Honcho could you please pm me too... im interested in setting newcamd... thanks.... sorry my english is littlebit ...
make a thread with yer problems on the board in well have a swatch ;)
well ok this is where i'm now.
been messing with the OStool configs, try anything and everything, eventually i've got green on the server connecton, i can see me there.
problem is its still coming up "scambled channel" or "channel unavaliable" so i still only clear FTA.
just as an afterthought we are supposed to clear encypted channels arn't we?.............we must do 'cos on my original post i was clearing things like Universal, Syfy, Atlantic.
it was only because i could not clear movies and sports that i posted.
so why can't i clear any encrypted channels now?
regards: canthackit
Don’t have an account yet? Register yourself now and be a part of our community!
