me again getting scrambled channel

**canthackit** · Apr 30th 2015

Hello more problems lol

got oscam setup been a long time since i had to set it up on my client box.

getting channel scrambled on premium channels.

not sure if i need two files or three for that matter.

this is my oscam.config
global]
disablelog = 1
logfile = 4000

[cache]

[newcamd]
port = 13000@0963:000000
serverip = 192.168.0.55
key = 0102034050607080901011121314
keepalive = 1

[cccam]
port = 12000
nodeid = DC5CEB5B108A154C
version = 2.0.11
reshare = 1

[dvbapi]
enabled = 1
user = localuser
boxtype = dreambox

[webif]
httpport = 8888
httpuser = linuxsat
httppwd = support
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

and oscam.server
[reader]
label = 192.168.0.55
description = s**.uk
protocol = cccam
device = 192.168.0.55, 12000
user = linuxsat
password = support
inactivitytimeout = 1
group = 1
cccversion = 2.0.11
cccmaxhops = 1
ccckeepalive = 1

and the error log

2015/04/30 04:44:23 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:24 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:24 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:24 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:25 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:25 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:25 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:26 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:26 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:26 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:26 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:27 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:27 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:27 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:28 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:28 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:28 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:29 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:29 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:29 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:29 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:30 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:30 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:30 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:31 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:31 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:31 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:32 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:32 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:32 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:33 18C5318 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2015/04/30 04:44:33 18C5318 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/30 04:44:34 18C5318 c Found 0 ECMpids and 6 STREAMpids in PMT
2015/04/30 04:44:34 18C5318 c [DVBAPI] Receiver wants to demux srvid D1C4 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2015/04/30 04:44:34 18C5318 c New program number: D1C4 (FFFE:D1C4 unknown) [pmt_list_management 3]
2015/04/30 04:54:43 18B6AA8 p 192.168.0.99 [cccam] disconnected: reason disconnect
2015/04/30 04:55:14 18B6AA8 p 192.168.0.99 [cccam] connecting to 192.168.0.55:12000
2015/04/30 05:04:13 18B6AA8 p 192.168.0.99 [cccam] disconnected: reason disconnect
2015/04/30 05:04:31 18B6AA8 p 192.168.0.99 [cccam] connecting to 192.168.0.55:12000

hope you can help.

regards: canthackit

**stevejo** · Apr 30th 2015

Why have you changed the whole config of the wetek as all you needed to do was add a cccam reader boxtype is pc not dreambox you Adont need cccam or newcamd protocol either unless your making the wetek a server ....have you made an account on your server for user called linuxsat and password support because that from the nline between oscam and cccam on an oscam cccam setup this is where i think your biggest issues is if you have a cccam server make an fline wetek as user and what ever as password and add that to this reader im assuming the ip address shown is that of your server and not the wetek ...please elaborate more on the setver setup itll be easier to help as im only guessing now

**canthackit** · Apr 30th 2015

ok does this help?

on the server.

oscam.conf
[cache]

[newcamd]
port = 13000@0963:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 12000
nodeid = 3ED9D9E410601578
version = 2.1.1

[dvbapi]
enabled = 1
user = local
boxtype = dreambox
au = $$$uk

[webif]
httpport = 16002
httpuser = linuxsat
httppwd = support
httprefresh = 10
httphideidleclients = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255

oscam.server
[reader]
label = s**uk
protocol = internal
device = /dev/sci0
caid = 0963
detect = cd
mhz = 450
cardmhz = 2700
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
lb_weight = 101

i've only used my line for the user.

oscam.user
[account]
user = linuxsat
pwd = support
caid = 0963
uniq = 2
monlevel = 1
group = 1
cccmaxhops = 1
cccreshare = 1

on the WETEK.

oscam.conf
[global]
disablelog = 1
logfile = 4000

[cache]

[newcamd]
port = 13000@0963:000000
key = 0102034050607080901011121314
keepalive = 1

[cccam]
port = 12000
nodeid = DC5CEB5B108A154C
version = 2.0.11
reshare = 1

[dvbapi]
enabled = 1
user = local
boxtype - dreambox

[webif]
httpport = 8888
httpuser = linuxsat
httppwd = support
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server
[reader]
protocol = cccam
description = $$$.uk
device = 192.168.0.55,51515
ccckeepalive = 1
inactivitytimeout = 1
label = 192.168.0.55
group = 1
user = Client2
password = Myclient
cccversion = 2.0.11

i connect to the server on the local ip not the domain name.

how am i doing lol.

regards: canthackit

**stevejo** · Apr 30th 2015

You also need a user

- - - Updated - - -

Remove cccam and newcamd from the wetek also

- - - Updated - - -

Dvbap box type is pc not dreambox

- - - Updated - - -

Make a user called local and this user must get group 1

- - - Updated - - -

On the wetek is where im meaning

**canthackit** · Apr 30th 2015

ok so this is my configs now.

on the server:
oscam.user
[account]
user = linuxsat
pwd = support
caid - 0963
uniq = 2
monlevel = 1
group = 1
cccmaxhops = 1
cccreshare = 1

on the WETEK:
oscam.conf
[global]
logfile = stdout
logfile=4000
preferedlocalcards=
dropdups=[monitor][monitor]
hideclient_to = 15
[dvbapi]
enabled=1
au=
boxtype=pc
user=local
[webif]
httpport=8888
httpuser=linuxsat
httppwd=support
httpallowed=127.0.0.1,192.168.0.0-192.168.255.255

oscam.user
account]
user=linuxsat
pwd=support
group=1
monlevel=1
uniq=2

oscam.server
[reader]
protocol = cccam
description = s**.uk
device = 192.168.0.55,12000 (server local ip)
ccckeepalive = 1
inactivitytimeout = 1
label = 192.168.0.55
group = 1
user = linuxsat
password = support
cccversion = 2.0.11

nothing clearing all i get is them bleedin' subtitles

in oscam showing as wetek offline

2015/04/30 08:25:06 135FA0 p cccam(r) 192.168.0.55: login failed, usr/pwd invalid

regards: canthackit

**stevejo** · Apr 30th 2015

[dvbapi]
enabled=1
au=
boxtype=pc
user=local

[account]
user= local
pwd = not needed for dvbapi user
description= local
keepalive = 1
au = skyuk optional incase you add a card
group= 1
cccmaxhops= 3
cccreshare = 1
cccignorereshare = 1

- - - Updated - - -

on the server:
oscam.user
[account]
user = linuxsat
pwd = support
keepalive = 1
group = 1
cccmaxhops = 1
cccreshare = 1
cccignorereshare = 1

**canthackit** · Apr 30th 2015

nope still nothing.

i'll have one last post as my configs are now, to see if there's still a problem there, then if not i'll give up.

SERVER
oscam.conf
1[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 1000
emmlogdir = /var/log/
ecmfmt = |c:p:s:l|e|w|

[anticasc]
enabled = 1
numusers = 1
penalty = 1
aclogfile = /tmp/oscam_ac.log
denysamples = 9
fakedelay = 1000

[cache]

[newcamd]
port = 13000@0963:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 12000
nodeid = 3ED9D9E410601578
version = 2.1.1

[dvbapi]
enabled = 1
user = local
boxtype = dreambox
au = $$$uk

[webif]
httpport = 16002
httpuser = linuxsat
httppwd = support
httprefresh = 10
httphideidleclients = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255

oscam.server
reader]
label = s**uk
protocol = internal
device = /dev/sci0
caid = 0963
detect = cd
mhz = 450
cardmhz = 2700
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
lb_weight = 101

oscam.user
[account]
user = linuxsat
pwd = support
uniq = 2
monlevel = 1
group = 1

WETEK

oscam.conf
[global]
logfile = stdout
logfile=4000
preferedlocalcards=
dropdups=[monitor]
hideclient_to = 15
[dvbapi]
enabled=1
au=
boxtype=pc
user=local
[webif]
httpport=8888
httpuser=meme
httppwd=meme
httpallowed=127.0.0.1,192.168.0.0-192.168.255.255

oscam.server
[reader]
protocol = cccam
description = $$$.uk
device = 192.168.0.55,51515
ccckeepalive = 1
inactivitytimeout = 1
label = 192.168.0.55
group = 1
user = linuxsat
password = support
cccversion = 2.0.11

oscam.user
[account]
user=local
pwd=
group=1
au=
cccstealth=
uniq=2

the server shows the wetek as connected, but it won't go online no matter what.

that's it i rest my case, my head hurts.

best regards: canthackit

**codar** · Apr 30th 2015

Quote

oscam.server
[reader]
protocol = cccam
description = $$$.uk
device = 192.168.0.55,51515
ccckeepalive = 1
inactivitytimeout = 1
label = 192.168.0.55
group = 1
user = linuxsat
password = support
cccversion = 2.0.11

Display More

Try changing this to your server cccam port number, (12000)

Quote

[cccam]
port = 12000
nodeid = 3ED9D9E410601578
version = 2.1.1

**snifferdsx** · Apr 30th 2015

1 question do you use oscam in android or openelec ?

**canthackit** · Apr 30th 2015

Quote from codar

Try changing this to your server cccam port number, (12000)

yeah sorry that was a typo

i changed the ip, but missed the port, it is 12000 as an example

regards: canthackit

- - - Updated - - -

Quote from snifferdsx

1 question do you use oscam in android or openelec ?

on android mate, i believe that's part of the problem.

regards: canthackit

**snifferdsx** · Apr 30th 2015

install ostool again
and dont change the first user and the dvbapi
on you need to do is config cardreader and the other users that is what you need to do

and the part from cccam ofcource

**canthackit** · Apr 30th 2015

Quote from snifferdsx

install ostool again
and dont change the first user and the dvbapi
on you need to do is config cardreader and the other users that is what you need to do

and the part from cccam ofcource

please excuse my ignorance but i'm not sure what you're saying.

can you please expain on a bit more detail.

thanks & regards: canthackit

**snifferdsx** · Apr 30th 2015

uninstall ostool then install it again because the api and user setting is set if you do a server in yoiur config then oscam works
and you need set cccam thats all dont know how to say clearly

**TH3-J0K3R** · Apr 30th 2015

Quote from canthackit

please excuse my ignorance but i'm not sure what you're saying.

can you please expain on a bit more detail.

thanks & regards: canthackit

He Means the servers IP/DNS , ccam ip

im sure yah cant use mgcamd and has to be cccam

**stevejo** · May 1st 2015

I think you need teamviewer support if you cant sort this

**canthackit** · May 1st 2015

is that an offer lol

**TH3-J0K3R** · May 1st 2015

just out of curiosity what image u using on server blackhole or such normalily have a cccam usr already made for updates to card i use that user for WeTek to use as a 256 as its already put into the cccam cfg, for updates on card when using cccam ,mgcamd or DvbApi .

Hope it helps

**canthackit** · May 2nd 2015

BH on the server DB800 SE clone

running Oscam only few problem atm card not updating, but still won't use CCcam or mg_camd as a client.

the only reason i have dvbapi enabled is so my peers can connect using CCcam.

you've just got me thinking "why have i got CCcam and Newcamd setup on the server"? i might as well remove them.

regards: canthackit

**stevejo** · May 2nd 2015

Dont remove cccam or they wont connect you need it in oscam conf for the client boxes to connect ,dvbapi updates cards just fine on its own what is your expiry date

**TH3-J0K3R** · May 2nd 2015

as above i have both running but i let one wetek conect via support cccam line for updates in other via mgcamd support but i have also as my .list on server box so it also update entitlements prob not the best way but it works ok until i realise a better way lol

me again getting scrambled channel

Participate now!

Share

Tags