What is wrong in my configs, if i enable ident&services i loose picture

rassi · Oct 31st 2011

Everything else is working, but i try to get oscam.services to work with oscam. I do have two cards
with same CAID with different packages.
srvid:s should be Ok, but if i enable ident and services in oscam.server i loose picture
and i can see log which say "(no matching reader)"

So what is wrong in my configs? :)

oscam.server

[reader]
label = Canal
enable = 1
protocol = pcsc
device = 0
group = 1
caid = 0B00
#ident = 0B00:006010,006020,006030,006040,006060,006070
#services = canal
lb_weight = 100

[reader]
label = Viasat
enable = 1
protocol = pcsc
device = 1
group = 3
caid = 090F
#ident = 090F:000000
#services = viasat
lb_weight = 100

[reader]
label = plus
protocol = newcamd
key = 2102330333060301091211111114
device = 192.168.1.5,10001
user = test
password = test
group = 4
caid = 0b00
#ident = 0b00:001010
#services = plus

oscam.services

[viasat]
caid = 090f
provid = 000000
SRVID = 000A,046A,04AB,0744,076C,0776,0780,079E,07A8,083E,085C,087A,0C30,0C3A,0C62,0D52,0D7A,0D84,0E6A,178E,17A2,17AC,1888,1897,189C,18A6,18B0,............

[canal]
caid = 0b00
provid = 006010,006020,006030,006040,006060,006070
SRVID = 0011,0021,0051,0091,0095,0099,009A,00C9,00CA,00CB,00CC,00CD,00CE,00E3,00E5,00E6,00E9,012D,012E,012F,0130,0131,0132,0133,0134,0135,013D..........

[plus]
caid = 0b00
provid = 001010, 001020, 001030
SRVID = 0273, 0225, 0257, 0209

oscam.conf

[global]
usrfile = /emu/oscam/oscamuser.log
logfile = /emu/oscam/oscam.log
cwlogdir = /emu/oscam/cw
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
bindwait = 120
netprio = 0
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 100
waitforcards = 1
preferlocalcards = 0
saveinithistory = 0
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0
saveinithistory = 1

[monitor]
port = 17700
monlevel = 4
nocrypt = 127.0.0.1,192.168.1.0-192.168.255.255,10.0.0.0-10.255.255.255

[webif]
httpport = 16241
httpuser = test
httppwd = test
httprefresh = 10
httpallowed = 192.168.1.2-192.168.1.255
httphideidleclients = 0
httpreadonly = 0

[cccam]
port = 10023
version = 2.2.1
reshare = 3
reshare_mode = 4
ignorereshare = 0
minimizecards = 0
keepconnected = 1
nodeid = xxxxxxxxxxxxxx

[camd33]
port = 40201
serverip = 192.168.1.8

[cs357x]
port = 25550

**master G** · Oct 31st 2011

Try removing the provid lines from the services files, look at these examples

dollybuster

Code

[dolly]
caid  = 0500
srvid = 1290,1291,1274,1275,1272,1273

slyuk

Code

[Variety Pack]
caid  = 0963
srvid = 125D,125F,1261,158B,151A,D2FF,D2FB,1710,D444,D7E6,C7A6,CC0A,1771,1775

rassi · Oct 31st 2011

It didnt help :(

now i got some better log about it

Code

2011/10/31 19:00:26        0 s >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build #5990 (i686-pc-linux)
2011/10/31 19:00:26        0 s version=1.20-unstable_svn, build #5990, system=i686-pc-linux, nice=-1
2011/10/31 19:00:26        0 s client max. idle=120 sec, debug level=255
2011/10/31 19:00:26        0 s max. logsize=100 Kb, loghistorysize=4096 bytes
2011/10/31 19:00:26        0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/10/31 19:00:26        0 s start client thread action 23
2011/10/31 19:00:26 B7504E68 c data from add_job action=23
2011/10/31 19:00:26 B7504E68 c cccam(s) test: parse_msg=1
2011/10/31 19:00:26 B7504E68 c cccam(s) test: ECM request from client: caid 0b00 srvid 0608(78) prid 000000
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006010
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006020
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006030
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006040
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006060
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006070
2011/10/31 19:00:26 B7504E68 c no match, 0B00:000000 rejected by reader 'canal' filters
2011/10/31 19:00:26 B7504E68 c test (0B00&000000/0608/4E:7BCC): rejected group (1 ms) (0 of 0) (no matching reader)
2011/10/31 19:00:26 B7504E68 c cw:
2011/10/31 19:00:26 B7504E68    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2011/10/31 19:00:26 B7504E68 c ending thread
2011/10/31 19:00:26        0 s start client thread action 23
2011/10/31 19:00:26 B7504E68 c data from add_job action=23
2011/10/31 19:00:26 B7504E68 c cccam(s) test: parse_msg=1
2011/10/31 19:00:26 B7504E68 c cccam(s) test: ECM request from client: caid 0b00 srvid 0608(78) prid 000000
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006010
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006020
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006030
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006040
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006060
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006070
2011/10/31 19:00:26 B7504E68 c no match, 0B00:000000 rejected by reader 'canal' filters
2011/10/31 19:00:26 B7504E68 c test (0B00&000000/0608/4E:7BCC): rejected group (0 ms) (0 of 0) (no matching reader)
2011/10/31 19:00:26 B7504E68 c cw:
2011/10/31 19:00:26 B7504E68    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2011/10/31 19:00:26 B7504E68 c ending thread
2011/10/31 19:00:27 B75065B8 c test (0B00&000000/060B/4E:B871): rejected group (0 ms) (0 of 0) (no matching reader)
2011/10/31 19:00:27 B75065B8 c cw:
2011/10/31 19:00:27 B75065B8    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2011/10/31 19:00:27 B75065B8 c ending thread
2011/10/31 19:00:28        0 s start client thread action 23
2011/10/31 19:00:28 B75065B8 c data from add_job action=23
2011/10/31 19:00:28 B75065B8 c cccam(s) test: parse_msg=1
2011/10/31 19:00:28 B75065B8 c cccam(s) test: ECM request from client: caid 0b00 srvid 0130(78) prid 000000
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006010
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006020
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006030
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006040
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006060
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006070
2011/10/31 19:00:28 B75065B8 c no match, 0B00:000000 rejected by reader 'canal' filters
2011/10/31 19:00:28 B75065B8 c test (0B00&000000/0130/4E:414D): rejected group (1 ms) (0 of 0) (no matching reader)
2011/10/31 19:00:28 B75065B8 c cw:
2011/10/31 19:00:28 B75065B8    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2011/10/31 19:00:28 B75065B8 c ending thread
2011/10/31 19:00:28        0   share-updater mode=initfast t=1s i=22
2011/10/31 19:00:29        0   share-updater mode=initfast t=1s i=21
2011/10/31 19:00:30        0   share-updater mode=initfast t=1s i=20
2011/10/31 19:00:30  9B159C8 h WebIf: Received stale header from 192.168.1.4.
2011/10/31 19:00:31        0   share-updater mode=initfast t=1s i=19
2011/10/31 19:00:32        0   share-updater mode=initfast t=1s i=18
2011/10/31 19:00:33        0   share-updater mode=initfast t=1s i=17
2011/10/31 19:00:33        0 s start client thread action 23
2011/10/31 19:00:33 B7507D08 c data from add_job action=23

Display More

hmm, something is wrong in provider ID?

2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006010
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006020
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006030
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006040
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006060
2011/10/31 19:00:26 B7504E68 c trying reader 'canal' filter 0B00:006070

**master G** · Oct 31st 2011

Rejected group (no matching reader) is coming from user test, which is using newcamd protocol, but i dont see newcamd active in oscam.conf.

Is this a remote N line ?

rassi · Oct 31st 2011

This is with cccam, with C: line in cccam.cfg
No newcamd in use, second 0b00 card is used via newcamd protocol to oscam main server and client takes
it from main with cccam, also tested with camd35

Code

2011/10/31 19:00:27 B75065B8 c test (0B00&000000/060B/4E:B871): rejected group (0 ms) (0 of 0) (no matching reader)
2011/10/31 19:00:27 B75065B8 c cw:
2011/10/31 19:00:27 B75065B8    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2011/10/31 19:00:27 B75065B8 c ending thread
2011/10/31 19:00:28        0 s start client thread action 23
2011/10/31 19:00:28 B75065B8 c data from add_job action=23
2011/10/31 19:00:28 B75065B8 c cccam(s) test: parse_msg=1
2011/10/31 19:00:28 B75065B8 c cccam(s) test: ECM request from client: caid 0b00 srvid 0130(78) prid 000000
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006010
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006020
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006030
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006040
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006060
2011/10/31 19:00:28 B75065B8 c trying reader 'canal' filter 0B00:006070
2011/10/31 19:00:28 B75065B8 c no match, 0B00:000000 rejected by reader 'canal' filters
2011/10/31 19:00:28 B75065B8 c test (0B00&000000/0130/4E:414D): rejected group (1 ms) (0 of 0) (no matching reader)
2011/10/31 19:00:28 B75065B8 c cw:
2011/10/31 19:00:28 B75065B8    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2011/10/31 19:00:28 B75065B8 c ending thread

Display More

rassi · Oct 31st 2011

forgot this one

oscam.user

[account]
user = test
pwd = test
disabled = 0
expdate =
group = 1,2,3,4,5,6,7,8,9
hostname =
uniq = 0
sleep = 0
monlevel = 0
au = 1
services =
caid =
betatunnel =
ident =
cccmaxhops = 10
keepalive = 0
numusers = 0
penalty = 0

**master G** · Oct 31st 2011

This reader is setup to read an N line from a remote server on 192.168.1.5 not the main oscam server where your other cards are active, no newcamd protocol active in oscam.conf.

Code

[reader]
label = plus
protocol = newcamd
key = 2102330333060301091211111114
device = 192.168.1.5,10001
user = test
password = test
group = 4
caid = 0b00
#ident = 0b00:001010
#services = plus

Display More

rassi · Oct 31st 2011

ah, you mean that one. That is card in DM box which is readed to main oscam with newcamd protocol and cccam client takes that one also from
oscam with cccam protocol. It does work. Only problem is those ident&services, becouse there is some issues with two 0b00 CAID card and i hope problems will solved when oscam uses services&ident filters. There is no newcamd in oscam.conf becouse that setting is just for clients? if i had understand right how oscam
work.

**master G** · Oct 31st 2011

Its possible the channels sids are out of date, take a look at this thread and let us know if it helps.

Oscam.services For Sly UK ( sid assign/reject )

Updated Oscam.srvid

What is wrong in my configs, if i enable ident&services i loose picture

OSCam Support Forum

Participate now!

Share

Tags