(ENGLISH]) hi work great . nbox5800sx If You see nbox on the front display means that You are in B4T mode so you can install
when You power your box You see Uboot 1.3.1 053 on the front display it means that it is in freebox mode and You can install Enigma or OpenPLI.
If You see nbox on the front display means that You are in B4T mode so you can install 7.1.7 or Open PLi.
When in Uboot 1.3.1 053 scroll up until you see b4u then press OK this will make the box switch from freebox mode to B4T mode.
To install put box in B4T mode, Switch off receiver and then power up again holding up button on front until you see updt, press Ok and it should start to install.
When switching from B4T to freebox you scroll up/down until you see F-B boot and press OK. That puts you into free box mode.
To install Nand 7.1.7 or Open Pli put the box in Freebox mode and then switch off receiver. Switch it back on holding the OK button on the front panel until you see Prog. Press Ok and then the receiver will then start to install Nand 7.1.7 or Open Pli
- - - Updated - - -
http://i58.tinypic.com/35l9gux.jpg
- - - Updated - - -
