hi,can any one help to recover my box I switched it on and loads message lx2 ld4 30,it appears to have lost its image and I cannot reload via usb,any help would be greatly appreciated.:06:ps it had a vix image on it.
xpeed lx2 problem
- bigray1
- Thread is marked as Resolved.
-
-
Have you a backup image created?
Disconnect any usb peripherals connected to the receiver (usb stick/hdd etc)
Format a usb stick (i find some receivers can be picky which make and capacity usb are used)
This is a handy usb format tool
I use a Sandisk cruizer blade 8gb which does work for this type of receiver.
Tutorial on how to flash this receiver is here:
http://linuxsat-support.com/showthread.php?t=64734
Load your backup on to usb or (if you don't have a backup) Images can be found here:
http://linuxsat-support.com/forumdisplay.php?f=658
Or click on the nightly builds tab on the top of the page and scroll down to openvix to get the latest vix image. -
Hi,Thanks for reply no luck,still getting a code on front lx2ld4 30,box is 4 months old and got it from world of sat and they are closed for to the 10th so might have to return it,thanks
-
Quote
still getting a code on front lx2ld4 30
This is the boot loader version that is installed.
Is it displaying "booting" after the bootloader version (lx2ld4 30)?
If not, your bootloader may be corrupted.
I'd then try reflashing the bootloader again.
You can find the boot loader here:
http://linuxsat-support.com/showthread.php?t=64844
Then try flashing a new image or your backup image. (follow my previous post on how to do this)Try to use 8gb capacity usb or less for flashing as larger capacity drives may not be recognized.
-
master G
Moved the thread from forum Golden Interstar XPEED Support to forum Xpeed LX1 * LX2. -
master G
Moved the thread from forum Xpeed LX1 * LX2 to forum Golden Interstar Xpeed - All Models.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!