Oscam/Hyperion 4.5

Hi guys,

I'm wondering if there is anyone who can shed some light on what I'm doing wrong as I can't seem to get Oscam working.
I'll try to be as detailed as I can.

I currently have an AA2 Box with E2 loaded and the image file Hyperion 4.5. (http://linuxsat-support.com/showthread.php?t=78344) Actually Picked this up off Boards.ie initially.
This image had Oscam_10000 ready to go. I have a C Line which I have used on another box in the house so there shouldn't be any problems with that.

What I have done so far is
1) Logged on to Oscam via my browser and I have input my C Line converted to Oscam in the Section Files->Oscam.server.
2) I haven't edited anything else in any of the sub headings(.conf/.user etc.). Not quite sure if I am meant to or not.
3) On my box I then clicked into the EMU Manager and Restarted the CAM. However this doesn't kickstart everything.

I've noted that in the top half that it states "Active CAM: oscam 10000" and that "Mapping CA1 to CA0" is enabled
and in the bottom half under the cardserver section it states "No ECM info"

Below I've detailed what my Oscam files currently are. Again I've only edited the final bit of oscam.server
I appreciate it if anyone could help point out what I'm missing or doing wrong! Cheers.

Oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7750
# Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.conf.txt

[global]
disablelog = 1
logfile = /dev/tty
nice = -10
maxlogsize = 32
waitforcards = 0
preferlocalcards = 1

[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = duckbox

[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httprefresh = 15
httpallowed = 0.0.0.0-255.255.255.255

Oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8988
# Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.user.txt

[account]
user = dvbapi
pwd = dvbapi
description = Triplex
au = 1
betatunnel = 1833.FFFF:1702,1834.FFFF:1F1F
group = 1,2,3,4,5

Oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9524
# Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt

[reader]
label = reader_up
enable = 0
protocol = internal
device = /dev/sci1
detect = cd
mhz = 500
group = 3
emmcache = 1,2,3

[reader]
label = reader_down
enable = 0
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
group = 4
emmcache = 1,2,3

[reader]
label = newcamd-reader
enable = 0
protocol = newcamd
device = 127.0.0.1,10000
key = 0102030405060708091011121314
user = pkt0
password = pkt0
fallback = 1
group = 5

[reader]
label=#####
enable=1
protocol=cccam
device=#####,####
user=user
password=password
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0

Thanks for the reply guys. Done both of your suggestions and neither done the trick unfortunately.
Still puzzled why it's not working.

I have a C Line so I think the format provided by Blueboy is the correct one.
And yes I have the other box disconnected so that shouldn't be an issue I would think.

Re-booted everything there again and still no luck. There's still no active server showing up. This is quite frustrating!

Just to update guys, after tweaking around with a few things in the file I've got all systems going.

Thanks for the replys everyone!

I was messing around and I chanced seeing would it work with Spark.

Over on Boards.ie there is thread for Spark/Alien 2. I downloaded the oscam 10669 files via https://www.dropbox.com/sh/vdc…3hhyz1smLPNuSr_an2Ma?dl=0
Set everything up on spark and edited my server details to oscam.server and it worked! FTP these oscam files to my desktop. Rebooted in Enigma and then FTP overwrote my original Oscam files which weren't working and restarted my Oscam 10000 and bingo Oscam was working in Hyperion. Obviously there was just an issue somewhere in my original oscam files somewhere.

I was playing around with so many things I think this is what done the trick for me, whether by skill or luck(most likely luck) it's up and going anyway!

oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM ymodv18-t35 build #0
# Read more: http://streamboard.gmc.to/osca…on/doc/txt/oscam.conf.txt

[global]
usrfile = /var/log/oscam/oscamuser.log
logfile = /var/log/oscam/oscam.log
cwlogdir = /var/log/oscam/cw
clienttimeout = 10000
nice = -1
serialreadertimeout = 2000
maxlogsize = 3000
saveinithistory = 1
readerrestartseconds = 1
lb_mode = 1
lb_nfb_readers = 3
lb_reopen_seconds = 200

[monitor]
port = 9999
nocrypt =
aulow = 120
hideclient_to = 15
monlevel = 1
appendchaninfo = 0

[dvbapi]
enabled = 1
au = 1
user =

[newcamd]
port = port@caid:000000;1014@0500:000000;1015@1810:000000;1020@0100:000000;1021@0100:000000
allowed =
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport = 8888
httpuser = alien
httppwd = alien
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

oscam.user

[account]
user =
group = 1,2
au = 1
uniq = 1

[account]
user = user
pwd = pass
disabled = 0
group = 3
hostname = ip

oscam.server

[reader]
label=#######
enable=1
protocol=cccam
device=######,######
user=#####
password=#######
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0